I do not have a technical/engineering drawing of the CE Smith Deep V Keel Roller Assembly #CE10405G that I can send to you but I did take one from our warehouse to measure it for you. Many of these measurements are shown on the photo I prepared for…
Yes, the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs #K2R526S can be used to replace your current TDE46247 rotors. From what I have found, the TDE46247 is a 12" rotor for a 6,000 lb axle and has…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Thanks for the photo; I can't say for certain if the lug can be replaced or not, but in order to find the correct replacement all you'd need to do is measure. For example, the Kodiak Wheel Bolt #K12WB2 is for Kodiak integral hub-and-rotor…
That's a pretty big tire size change but it's possible. The tire size of ST205/75-15 has an overall diameter of 27.1 inches and the diameter of the 4.80-12 will be 20.5 inches. So you'd end up with 3.3 less inches of fender clearance…
I believe that I can help you with the tugging you are experiencing. First, consult your vehicles owners manual for the towing capacities and recommendations, and to make sure you are not exceeding those capacities. Next, there is a formula you can…
