Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...dimensions: 14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited lif...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
...dimensions: 14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited lif...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
...dimensions: 14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited lif...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Tube Step Specs:
Features:
Use your foot to lower this spring-loaded step from beneath your vehicle's rear bumper to easily access gear in the bed. The step bolts on without drilling, retracts under your truck for storage and works with your tailgate open or closed.
Installation Notes:
No drilling required for installation
Trekstep can be installed on either the driver side or passenger side
More Information >Tube Step Specs:
Features:
...14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited life...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
...14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited life...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
...14" wide x 4" deep Drop: 5" Weight capacity: 500 lbs Quantity: 2 steps Limited life...
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rustproof, polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rustproof stainless steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rust-resistant step into your truck.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rust-resistant step into your truck.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
The curved ends on these rustproof, polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rust-resistant step into your truck.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these 4" wide, oval step bars give your vehicle a streamlined look. The 3-1/2" wide step pads provide grip, and the black powder coated steel resists rust while adding rugged style. Installation kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rustproof stainless steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
The curved ends on these 4" wide, oval step bars give your vehicle a streamlined look. The 3-1/2" wide step pads provide grip, and the polished stainless steel resists corrosion while adding brilliant style. Installation kit included.
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rustproof stainless steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire B&W Companion…
view full answer...Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but…
view full answer...Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...