2006 Ford F-150 Suspension Enhancement

Features:

5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Features:

5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

1,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Features:

Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.

Installation Notes:

Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

Get improved handling with minimal sway and body roll. The StableLoad pads in this suspension enhancement kit feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.

Installation Notes:

Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.

Installation Notes:

No drilling required for installation

Product does not work with SuperSprings suspension kits

Product designed for vehicles with factory leaf springs and an upper overload spring

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

No drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Use Spacer Kit 2366 with Heavy Duty Payload Package

Not intended for FX2 models

Features:

7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Compatible with in-bed hitch

Features:

2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.

Installation Notes:

Designed for vehicles that have been lowered 2" to 6"

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.

Installation Notes:

No drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Features:

2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

SumoSprings jounce will replace the factory bumpstop for this application