... Weld or bolt it on, run the wiring, and you're set.Specs Dimensions: 8-5/8" long x 4" tall x 3-3/4" wide Application: Mounting box for 6" oval and 2" round lights Fits left or right side Mounting: Weld-on or bolt-on installation Mounting attachment center: 2" Construction: Steel Raw finish (unpainted)
This aluminum mounting box protects an exterior light from the elements. A 4" diameter round viewing hole and a rugged diamond plate pattern make the box perfect for mounting on your truck.Features: Mounting box protects a single exterior light from the elements Welded aluminum is rust resistant and durable Diamond plate pattern adds a rugged look Box has (1) 4" round hole Dimensions: 6-1/2" long x 6-1/2" tall x 3" deep
This aluminum mounting box protects an exterior light from the elements. A 6-3/4" long oval viewing hole and a rugged diamond plate pattern make the box perfect for mounting on your truck.Features: Mounting box protects a single exterior light from the elements Welded aluminum is rust resistant and durable Diamond plate pattern adds a rugged look Box has (1) 6-3/4" long x 2-1/2" tall oval hole Dimensions: 8-1/2" long x 3-3/4" tall x 3-1/2" deep
This aluminum mounting box protects 3 exterior lights from the elements. (3) 6-1/2" Long oval viewing holes and a rugged diamond plate pattern make the box perfect for mounting on your truck.Features: Mounting box protects 3 exterior lights from the elements Welded aluminum is rust resistant and durable Diamond plate pattern adds a rugged look Box has (3) 6-1/2" oval holes Dimensions: 25" long x 4-1/4" tall x 3-1/2" deep
This aluminum mounting box protects two exterior lights from the elements. (2) 6-1/2" Long oval viewing holes and a rugged diamond plate pattern make the box perfect for mounting on your truck.Features: Mounting box protects 2 exterior lights from the elements Welded aluminum is rust resistant and durable Diamond plate pattern adds a rugged look Box has (2) 6-1/2" long oval holes Dimensions: 17" long x 4-1/4" tall x 3-1/2" deep
You're loaded up after dark and rolling out. This light handles the signaling and keeps your plate visible. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Passenger-side light (TN62XR) and wiring sold separately.
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Driver-side light (TN42XR) with license light sold separately.
Slim left-side 8-function tail light with built-in license plate light. IP68 sealed and truly submersible, it installs with standard bolts and a 12" pigtail to keep your trailer bright and legal mile after mile.Features: Left-side boxlight with 8 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector, license plate light IP68 dust- and waterproof with hermetic seal - sonic-welded, potted electronics are submersible Surface mount installation - hardware not included Impact-resistant lens; meets FMVSS 108 requirements Specs: Measurements: 6" x 3-9/16" x 2-1/4" LEDs: 7 6 Red 1 White for license plate light Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4-20 carriage bolts (not included) Connector: 12" Pigtail Wire colors: White: ground Brown: brake lights and license plate Green: right turn Yellow: left turn Lifetime warranty TecNiq's 8 Function Slim Line taillight is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, side reflector and license plate light in a revolutionary, cost-effective design.
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 8 functions Stop, tail, turn, clearance, side marker, side reflector, rear reflector, and license plate Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs 1 White LED for license plate More efficient and durable than incandescent bulbs Direct replacement for standard trailer light Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: driver's side Passenger side: TN92XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep Total diodes: 8 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.14- 0.20 amps
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 7 functions Stop, tail, turn, clearance, side marker, side reflector, and rear reflector Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs More efficient and durable than incandescent bulbs Direct replacement for standard trailer light Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: passenger side Driver side: TN32XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep IP Rating: 68 Total diodes: 7 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.06- 0.09 amps
Steel bracket allows you to mount your 4" round trailer tail light to the frame of your trailer. Bolts or welds on to your trailer's frame. Works with all grommet-mounted and most flange-mounted 4" diameter trailer lights.Features: Mount your 4" round tail light to your trailer's frame Bolt- or weld-on application Requires PVC grommet (sold separately) to complete installation Constructed of powder-coated steel Made in the USA Specs: Overall dimensions: 5-3/4" tall x 6" wide x 1-1/2" deep Light hole diameter: 4-1/2" Distance between trailer frame mounting holes: 4" Fits: All grommet-mounted and most flange-mounted 4" diameter trailer tail lights
Buyers Products tail light mounting box. Designed for (3) 4" round DOT lights (sold separately). Stainless steel construction.Features: Buyers Products tail light mounting box Designed for (3) 4" round DOT lights (sold separately) Helps to protect exterior lights from the elements Stainless steel construction Overall dimensions: 18" wide x 6" tall x 3" deep
Features: Helps to protect exterior lights from the elements Designed for (1) 6" oval light and (1) 2" round sidelight (both sold separately) Black powder-coated steel construction Overall dimensions: 8" wide x 3" tall x 3" deep
This steel mounting box protects an exterior light from the elements. A 6-3/4" long oval viewing hole and a black powder coat make the box perfect for mounting on your truck.Features: Mounting box protects a single exterior light from the elements Steel is weather resistant and durable Black powder coat adds a rugged look Box has (1) 6-3/4" long x 2-1/2" tall oval hole Dimensions: 8-1/2" long x 3-3/4" tall x 3-1/2" deep
Filters
