Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The 65535 likely stands for your 6 on 5-1/2 bolt pattern on a 3,500 pound axle. Which means your bearings numbers should be #L68149 and #L44649, inner and outer. You'll want to verify these are correct before purchasing. If I'm right about…
view full answer...I do have an option for you but we unfortunately do not offer any leaf springs this long. That said, most of what we see for these older military trailers due to the inability to obtain parts and their off-road capability is switching to the Timbren…
view full answer...Excellent question. There is no disadvantage to using a special trailer tire with a higher weight Load Range Rating than is required by your trailer's weight. Doing so simply means that those higher-rated tires will tend to run cooler, since they…
view full answer...The overall capacity of a trailer is more than just the weight capacity of the wheels and tires. You also need to consider the capacity of the axles, brakes, frame, and coupler. Most likely increasing the tire/wheel capacity will not increase the…
view full answer...Going to a tire with a higher rated load range will mean you will need a higher psi rating. The problem with going to a higher rated tire is that it may result in a stiffer ride. For example, a Load Range E tire like part #TR225LRE is rated for a…
view full answer...The Taskmaster Provider tires like part #TTWTRTM2257515D that you referenced are the best from Taskmaster and have proven to be a reliable and popular choice among trailer owners. This tire specifically features a load range D (2,540 lbs at 65 psi)…
view full answer...Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…
view full answer...I have a better solution for you than the tire you referenced. The part #TTWTRTM2057515C is the exact same size as what you have and is also a radial tire. The #TTWTRTM2257515D would be a bit larger than what you currently have and has the less…
view full answer...I went through all of our shocks for trailer surge brakes and did not find an exact match. A similar one is the Demco #DS12426 replacement shock. This shock measures 6” eye to eye compressed, and 8-1/8” extended. In my research I found out MaeCo has…
view full answer...The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…
view full answer...To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…
view full answer...The shackle straps included in the Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles #LC64FR you mentioned are 3-1/8" center to center and 4-3/8" overall length as shown in included diagram. Using the longer…
view full answer...Filters
4940 results