These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Universal Roller Brackets will accommodate any size roller length. Brackets feature a 5" slot, which allow vertical adjustment for stabilizing boat on trailer.
Replace the standard rubber spool roller on your boat trailer with this thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 spool roller on your boat trailer Fits a 4" wide bracket with a 5/8" diameter shaft Eases loading and unloading of boat Supports keel of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Overall length: 3-3/4" Overall diameter: 3" Outer diameter of center hole: 5/8"
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 4" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring pack and bottom of trailer frame: 6" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 7-7/16" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
Every time you head to the ramp or hit the road, you count on your trailer to keep your boat or gear riding safe. This galvanized bracket connects your slipper spring to the frame, resists rust from rain, spray, and muddy drives.Made in the USA Specs Application: Front hanger for slipper spring suspension (eye end) Bolt-on installation (mounting hardware not included) Attaches to underside of trailer frame General: Overall dimensions: 5-3/8" long x 2-3/8" wide x 2-1/4" tall Inside width: 1-15/16" Shackle bolt hole diameter: 9/16" (each) Material: 4-gauge galvanized steel Quantity: 1 bracket Made in the USA
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
This hanger bracket secures the slipper end of a slipper spring on your trailer's suspension. It is constructed of corrosion-resistant galvanized steel.Features: Heavy-duty bracket connects the slipper end of a slipper spring to your trailer Bolt-on installation Attaches to the underside of trailer frame Does not include mounting hardware 7-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Application: rear of slipper spring Overall dimensions: 4-1/4" long x 2-1/4" wide x 1-3/4" tall Inside width: 1-7/8" Quantity: 1 bracket Install a new suspension without the hassle of welding a hanger to the bottom of your trailer.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Built for the Ramp: Hot-dip galvanized finish shrugs off road grit, spray, rain, and saltwater to help prevent rust. Straightforward Install: Slotted brackets make placement simple for a tidy, reliable setup. Features to know about Pontoon Bunk Brackets for Even, Scuff-Free Support Your pontoon will ride at its best when your bunks carry the tubes evenly.
This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.Features: Heavy-duty bracket connects the eye of a slipper spring to your trailer Bolt-on installation Attaches to the underside of trailer frame Does not include mounting hardware 7-Gauge, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Application: front of slipper spring Overall dimensions: 4-1/4" long x 2-1/4" wide x 2-1/4" tall Inside width: 1-7/8" Diameter of shackle bolt holes (each): 9/16" Quantity: 1 bracket Install a new suspension without the hassle of welding a hanger to the bottom of your trailer.
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 4" long x 1-3/4" tall Hole diameter: 1/2"
This one-piece panel bracket braces an 8" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports an 8" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 8" rollers Accepts an 8-7/8" long x 5/8" diameter roller shaft Overall dimensions: 8-1/8" long x 7-3/4" wide x 3-1/2" tall Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
Filters
