Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 1,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 900 lbs Axle capacity: 1,800 lbs Length from center of spring eye to end of spring (unloaded): 30" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 7/8" Leaf thickness: 3/8" Number of leaves: 2 Additional dimensions: see table Part Number A B C D E e29SR 16-1/2" 30" 15" 17-3/4" 4-7/8" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
USA-made slipper leaf spring acts as part of your trailer's suspension system providing an attachment point for a 1,800-lb axle. Spring flexes to resist shock while ensuring a smooth ride. Includes bushing with 9/16" inner diameter.Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushing included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Eye of spring attaches to hanger mounted on trailer frame Slipper end slides into hanger or equalizer Made in the USA Specs: Quantity: 1 leaf spring Spring capacity: 900 lbs Axle capacity: 1,800 lbs Length from center of spring eye to end of spring (unloaded): 30" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 7/8" Leaf thickness: 3/8" Number of leaves: 2 Additional dimensions: see table Part Number A B C D E TRU42FR 16-1/2" 30" 15" 17-3/4" 4-7/8" Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
This Dutton-Lainson single-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations.Mechanical Advantage Reversible Ratchet Max. Drum Capacity - Cable (3) Max. Drum Capacity - Strap DL14627 1,800 lb. 1-1/8" 5.4:1 9-1/2" 73 yes 9/32" x 58' 38' (2) Capacity is based in direct pull on the third layer of line on the drum.
Hand winch is perfect for marine use and other applications that require horizontal pull. Freewheel lets you manually control strap pay out, and reversible ratchet lets you load cable or strap onto drum in either direction.Features: Heavy-duty, single-speed hand winch is designed for horizontal pulling applications Perfect for loading boats onto your trailer and maneuvering bulky equipment Designed to pull objects up to 1,800 lbs Freewheel mode lets you manually control strap or cable payout Reversible ratchet lets you load cable or strap onto the drum in either direction Matte black powder coat finish and zinc TUFFPLATE finished hardware resist corrosion Deluxe, all-black handle has soft and comfortable grip Includes clamp kit to install cable onto winch drum (3) 3/8" Bolts (not included) required for installation Made in the USA Specs: Rated line pull (with 1 layer of strap around the reel): Static load: 1,800 lbs Rolling load: 18,000 lbs Boat pull capacity: Trailer with wooden bunks and no self-alignment capability: 1,800 lbs Standard trailer: 3,600 lbs Trailer equipped with free-turning rollers: 5,400 lbs Handle arm length: 10-3/4" Reel hub diameter: 1-1/8" Gear ratio: 5:4:1 Maximum drum capacity: Cable: 9/32" x 58' Strap: 38' 5-Year limited warranty Note: Winches are not to be used as hoists for lifting, supporting, or transporting people, or for loads over areas where people can be present.
Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.Features: Square axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application Galvanized steel axle is sturdy and provides corrosion resistance Great for boat or snowmobile trailers Reversible straight beam can be used for underslung or overslung applications Seatless design - does not require spring seats Straight spindles - no drop Galvanized idler hubs are sturdy and corrosion resistant Bearings, races, seals, grease caps, wheel studs, lug nuts, and high-performance synthetic grease included Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 57-1/2" Spring-center-to-spring-center length: 46-1/2" Overall beam length: 62" Hub bolt pattern: 5 on 4-1/2" Tubing width: 1-1/2" Spindle size: 1-1/16" Grease cap outer diameter: 1.983" Wheel stud diameter: 1/2" Wheel size: 13" - 15" Bearing, Race, and Seal Information Bearings (included) Inner/outer bearing: L44649 Races (included) Inner/outer race: L44610 Grease seal (included): RG06-020 Inner diameter: 1.5" Outer diameter: 1.987" Corrosion Resistance for Marine Use Galvanized steel parts are great for marine use because they are hot-dipped in zinc after being stamped.
Square trailer axle beam measures 57-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 46-1/2" from spring center to spring center. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.Features: Square axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application Galvanized steel construction is sturdy and provides corrosion resistance Great for boat or snowmobile trailers Reversible straight beam can be used for underslung or overslung applications Seatless design - does not require spring seats Non EZ lube straight spindles - no drop 2 Spindle nuts, 2 spindle washers, and 2 cotter pins included Made in the USA Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 57-1/2" Spring-centering-hole-to-spring-centering-hole length: 46-1/2" Overall length: 62" Tubing width: 1-1/2" Spindle size: 1-1/16" Bearing, Race, and Seal Information Bearings (sold separately) Inner/outer bearing: L44649 Races (sold separately) Inner/outer race: L44610 Grease seal (sold separately): RG06-020 Inner diameter: 1.5" Outer diameter: 1.987" Galvanized Steel Galvanized steel parts are great for marine use because they are hot-dipped in zinc after being stamped.
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.Features: Square axle beam acts as part of your trailer' suspension system Replaces an axle on your trailer Straight spindles - no drop Studded hubs are sturdy and corrosion resistant Bearings, races, seals, grease caps, wheel studs, lug nuts, and quality calcium-sulfonate grease included Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 49-1/2" Spring-center-to-spring-center length: 38-7/16" Overall beam length: 54" Hub bolt pattern: 5 on 4-1/2"
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to the rain gutters on your vehicle.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to tracks on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to fixed mounting points on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to tracks on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to tracks on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to fixed mounting points on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to ditches on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to fixed mounting points on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to ditches on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to tracks on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to ditches on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to tracks on your vehicle's roof.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to fixed mounting points on your vehicle's roof.
Need to haul your bike to the trail but struggle with lifting gear onto your crossbars? We recommend the Thule ProRide XT with lift assist. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load a bike.To build your own kit just add the Uplift (MR39ZV) and the part numbers for your preferred accessories from the table below to your cart. Bike Racks Thule TH599000, TH75JV, TH95JV Yakima Y22DJ, Y68DJ, Y54NJ, Y25FR Kuat KU32VR Inno INA391, INXA391, IN26VR Ski and Snowboard Racks Thule TH7291 Front Runner FR76HJ Rhino Rack RR572, 573 Kayak Carriers Thule TH849000, TH896 Front Runner FR77FB, FR87FB Rhino Rack RR580, RR581 Kuat KU53VR, KU33VR Malone MPG1001 etrailer e36ZR Cargo Boxes Thule TH6456B, TH613, TH78GC Yakima Y07334 Benton B44FR Fishing Rod Holders Rhino Rack RR573F Spacing for clamp-on or U-bolt mounted accessories
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
This heavy-duty, aluminum crossbar works with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bar has a built-in C-channel for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Filters
