A reliable water pump can make a big difference in your RV's plumbing system. This 12V pump restores steady 3 GPM water flow with quiet operation and dry-run protection, so water keeps flowing throughout your RV.Features to know about Restore Reliable Water Flow Replacing a failed water pump is all about getting your fresh water system working again. This 12V pump is designed for quick installation and delivers up to 3 gallons per minute at 45 psi.
Restore control of your hydraulic dump trailer with this replacement 3-button pendant controller. Designed to replace a worn or lost remote, it provides simple push-button operation for Power Up, Power Down, and Gravity Down functions.
Conserve battery power and help your pump last longer. This accumulator tank reduces cycling of your pump system, making it quieter by allowing the pump to reach shut-off pressure more smoothly. ... Features: Helps produce a smooth, controlled, uninterrupted flow of water in your RV Pushes water through pipes before initiating the pump Allows enough water flow to let you flush at night without waking others in the RV Decreases battery drain by reducing on/off pulsing cycle Reduces noise by allowing your pump to reach shut-off pressure more smoothly Semi-rigid rubber feet also reduce noise caused by vibration Made with a maintenance-free internal rubber membrane Mounts downstream from your pump Compact enough to fit in small spaces Connects to standard NPT connections Includes hose barb fittings for 1/2" hoses Specs: Overall dimensions: 7-7/8" long x 5" wide x 4-1/2" tall Mounting hole spacing (center to center): 4-1/8" Capacity: 0.75 liter Maximum pressure: 125 psi Pressure pre-charge: 10 psi Flow: 125 gallons per minute (GPM) Ports: Inlet: 1/2" male NPT Outlet: 1/2" male NPT Weight: 1 lbs
Add hydraulic lift to an A-frame work trailer with this 7K double-acting jack. It connects to an external HPU through #6 JIC ports, bolts to a 5" x 5" mounting pattern, and provides 20" of lift with a pivoting 7" foot.Know Your Mounting Pattern: 5" x 5" plate uses three approximately 1/2" holes; hardware is not included. Plan Your Backup at the Pump: Jack has no built-in manual override, so emergency operation depends on your HPU setup. Features to Know About Add Hydraulic Lift Without Replacing Your Whole System If your A-frame trailer already has hydraulic power, or you are building a hydraulic setup from scratch, this jack lets the pump do the lifting instead of your shoulders.
... When it's time to drop, it powers back down smooth and under control. The pump drives fluid both ways to keep the trailer working.Highlights Smooth Control: Double action pump powers lift and drop for steady movement both ways. Handles Heavy Loads: 3-quart reservoir keeps fluid flowing for big dumps and lifts.
When a load needs to move, you need hydraulic power you can trust. This 6-quart, compact double-action power unit delivers controlled lifting and lowering for dump beds, lift gates, and work equipment, helping you get the job done with confidence.Specs Function: Double action (power up / power down/gravity down) Motor Voltage: 12V DC Flow Rate: 2 GPM Max Pressure: 3,200 PSI on A port 1500 PSI on B port Pump Type: Horizontal mount hydraulic gear pump Ports: SAE #6 Reservoir: Poly, 6 quarts Remote: 3-button PU/PD/Gravity corded remote Dimensions: Approx. 22" long x 9" wide x 9" tall (with reservoir) Weight: 33 lbs Applications: Dump trailers, lift gates, utility and work trailers Warranty: 2-Year limited
A reliable water pump can make a big difference in your RV's plumbing system. This 115V pump restores steady 3.3 GPM water flow with quiet operation and dry-run protection, so water keeps flowing throughout your RV.Features to know about Restore Reliable Water Flow Replacing a failed water pump is all about getting your fresh water system working again. This 115V pump is designed for quick installation and delivers up to 3.3 gallons per minute at 45 psi.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while manual overrides give you a backup if the trailer loses power.Both pumps run from your trailer's 12V electrical system, and the kit includes the battery cable and 120-amp circuit breaker needed for the dual-pump setup.
Upgrade a heavy trailer with a 20K tandem hydraulic jack system. Two 12K legs share one 12V pump for powered lifting with 24" of lift. Complete install hardware is included; this setup does not provide side-to-side leveling.One keyed control extends and retracts the system without requiring a separate pump at each leg. Because both legs share one pump, they cannot be adjusted independently for side-to-side leveling. If you need to raise one side separately, a dual-pump setup is the better fit.
Motorized, self-priming pump creates a consistent flow of fresh water to your RV or camper. Works as a direct replacement for a 12-volt pump. The quiet pump has a check valve to prevent backflow and a thermal breaker to prevent overheating.It has the ability to prime up to 6' vertically and 30' horizontally. The pump also features an internal check valve that prevents backflow contamination of your clean water supply. The pump has been thoroughly freeze and thaw tested for up to 5 two-hour cycles, and it was tested with a higher pressure at shutoff than other water pumps.
Level and lift a heavy trailer with two 12K hydraulic legs, each powered by its own 12V pump. Independent controls let you adjust either side separately, while 24" of lift and a 24K combined capacity handle demanding trailers.Both pumps run from your trailer's 12V electrical system, and the kit includes the battery cable and 120-amp circuit breaker needed for the dual-pump setup.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Inconsistent water pressure means interrupted showers, slow sinks, in an RV. This pump delivers up to 3.5 GPM at 55 psi with an upgraded pressure switch, built-in strainer, and self-priming design for dependable water flow.Automatically Responds to Water Demand: An upgraded pressure switch cycles the pump on and off as fixtures are used. Helps Protect the Pump: Built-in strainer filters debris before it reaches the pump for dependable operation.
Air in the lines, short cycling, and dry runs can interrupt water use in an RV. This self-priming pump clears air automatically, reduces cycling, and protects itself from heat and low-water situations to keep your water flowing where you need it.RV water systems don't always behave the way you expect. Tanks run dry, water demand changes quickly, and pumps end up cycling on and off more than they should. This pump is thermally protected and can run dry during normal priming or brief low-water situations without damaging internal components.
Inconsistent water pressure means interrupted showers, slow sinks, and an RV. This 12V fresh water pump delivers up to 5 GPM at 60 psi with a 5-chamber diaphragm design that supports up to five fixtures and helps reduce pump cycling.Simplify Pump Replacement: Quick-attach fittings and an industry-standard mounting pattern simplify replacement of compatible pumps. Operates Quietly and Safely: Quiet operation reduces pump noise, while ignition protection provides added installation flexibility.
This self-priming, AC-powered water pump delivers steady flow for RV and marine systems. It clears air from the lines, reduces noise and cycling, and protects itself from overheating during extended or changing water demand.Quiet Operation for Indoor Water Systems Because this pump is designed for use in RVs, boats, and tiny homes, noise control matters. The noise-dampening design helps reduce vibration and sound during operation, making it better suited for living spaces where pumps are installed nearby.
Motorized, self-priming pump creates a consistent flow of fresh water to your RV or camper. Works as a direct replacement for a 115-volt pump. The quiet pump has a check valve to prevent backflow and a thermal breaker to prevent overheating.It has the ability to prime up to 6' vertically and 30' horizontally. The pump also features an internal check valve that prevents backflow contamination of your clean water supply. The pump has been thoroughly freeze and thaw tested for up to 5 two-hour cycles, and it was tested with a higher pressure at shutoff than other water pumps.
When shower sump water backs up in a cramped locker, you need a pump that can mount out of the bilge. The Whale Gulper 320 installs high and dry, self-primes, and moves graywater through non-choke valves without an internal filter screen to clog.It keeps operating through those gaps, so you are not treating a dry moment like a failure. 12V Power and System Specs You Can Wire Correctly Bilge and graywater systems fail fast when the electrical side gets sloppy. This pump runs on 12V DC, calls for a 10 amp fuse, and specifies 16 AWG cable size. The result is a pump that runs as intended once wired to spec.
Add 8,000 lbs of hydraulic lifting capacity to a heavy work trailer with this direct-weld square jack. Its double-acting cylinder provides 20" of powered lift and connects to an external hydraulic power unit through #6 JIC ports.Match the Jack to Your Hydraulic System This jack does not include its own pump. Its double-acting cylinder connects to a separate hydraulic power unit through #6 JIC fittings, with hydraulic pressure powering both extension and retraction.
Get ultimate peace of mind when you're out on the lake and when you're docked. Submersible, motorized pump with built-in float switch automatically removes excess water from the bilge wells in your boat so you can focus on relaxing.Automatic Bilge Pump There are 3 types of bilge pumps available: manual, non-automatic, and automatic. Manual pumps are human-powered, and no one wants to be constantly monitoring their boat and pumping out water on their day off.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.Features: Heavy-duty water pump provides a reliable flow of fresh or salt water in your RV or boat Comfortable water pressure makes your RV feel like home 2-Chamber diaphragm ensures high-volume water flow for up to 2 fixtures Durable, abrasion- and corrosion-resistant santoprene construction Self-priming unit removes air from pipeline, preventing delays and water spitting out of the faucet Unit can be hidden from view because it doesn't require manual priming Internal check valve prevents backflow contamination of your clean water supply Automatic start-and-stop pressure switch helps prevent damage to the pump Shuts the unit off if it becomes overloaded and starts to overheat Turns the unit back on once core temperature reaches a tolerable level Made for intermittent duty, but can run dry during priming without damage to the unit Quiet operation - comparable to an indoor electric fan Semi-rigid rubber base minimizes vibrations and is tear and corrosion resistant Durable, energy-efficient, copper-core motor generates minimal heat Enclosed housing and sealed switches prevent damage caused by moisture Included filter prevents debris from entering and damaging the unit Simple installation Connects to standard NPT connections - includes hose barb fittings for 1/2" hoses too Mounts in any position using bolts (hardware not included) Can be mounted in a location higher than the water tank Compatible with 12V DC systems Specs: Overall dimensions: 7-3/8" long x 3-7/8" wide x 2-3/8" tall Mounting hole pattern (center to center): 2-1/4" long x 3-1/8" wide Ports: Inlet 3/8"-14 male PT Outlet: 3/8"-14 male NPT Maximum power draw: 5.04 amps Flow: 1.3 gallons per minute (GPM) Maximum pressure: 100 psi Maximum water temperature: 140 F 2-Year limited warranty
When a load needs to move, you need hydraulic power you can trust. This 3-quart, compact double-action power unit delivers controlled lifting and lowering for dump beds, lift gates, and work equipment, helping you get the job done with confidence.Highlights Smoother Bed Control: Double-action pump powers both lifting and lowering for steady, controlled movement in either direction. Ready for Bigger Jobs: Large 3-quart reservoir keeps hydraulic fluid flowing when you're lifting or dumping heavier loads.
Standing water in the bilge adds weight and affects stability. The Tsunami MK2 800 GPH Manual Bilge Pump moves water efficiently while the patented X-Air impeller forces trapped air from the system to help maintain steady operation in freshwater use.This Mk2 pump is designed around faster access, with a true single-handed, twist-out motor cartridge that lets you inspect and clear debris without removing the entire pump assembly.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Filters
