This heavy-duty, versatile Yakima roof rack comes with strong, aluminum crossbars. It works with channel-mount and clamp-on accessories, plus each bar has tie-down points on the endcaps. Install to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 HD crossbars, 4 SkyLine towers, 4 HD adapters, and a custom fit kit for your vehicle Heavy-duty crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Rubberized strips in top channels reduce wind noise and drag Integrated tie-down points on endcaps make it easy to secure gear Custom installation to the fixed mounting points on your roof Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack Specs: Crossbar dimensions: 60" long x 3" wide x 1-1/2" tall Top channel dimensions: 13/16" wide x 1/4" tall x 3/8" opening Weight capacity: 500 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
Haul gear above your vehicle's roof with this tough platform rack. Dovetail design simplifies mounting accessories, provides more personalization, and helps keep the rack at a low profile. Works with a variety of overlanding accessories.Features: Sturdy platform rack lets you build an aftermarket roof rack that is perfect for overlanding use Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets Perfect for road trips, camping, and overlanding - a perfect fit for any outdoor lifestyle Dovetail mounting design on slats and perimeter is an easy-to-use alternative to top channels No need to run the accessories the length of the slat to mount Side mounting accessories on the perimeter rails free up space on the top of the rack Dovetail track accommodates various off-road accessories (sold separately) Compatible with rails, light brackets, jack holders, spare tire carriers, jerry can holders, and more Removable end caps let you feed cables through the perimeter rails to keep them out of the way Low profile design and wind deflector cut down wind noise and drag Aluminum with black powder coat finish is robust and corrosion resistant Fully welded, single-piece construction is strong and rugged - no assembly required Installs in the fixed mounting points on your vehicle's roof with included mounting kit Specs: Dimensions: 61" long x 51" wide Tray weight capacity: 285 lbs Always observe your vehicle's maximum weight capacity Platform weight: 37 lbs 3-Year warranty
... Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Sportz crossbars, 4 RX legs, and a custom fit kit Aero-style crossbars pair with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Works with Rhino Rack accessories that use Zwifloc fastening system Rubberized dual strips help reduce drag and wind noise Guides airflow over the bars to minimize wind noise while driving Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar length: 50" Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Base kit: 5-year limited
... Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 JetStream crossbars, 4 SkyLine towers, and a custom fit kit for your vehicle Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most universal cargo, water, snow, and bike carriers Push-down rubber strips in top channels let you press hardware into the tracks - no trimming needed Strips help reduce wind noise and vibration Custom installation to the fixed mounting points on your roof Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack Specs: Crossbar dimensions: 50" long x 2-3/4" wide x 1-1/8" tall Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
... Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Sportz crossbars, 4 RX legs, and a custom fit kit Aero-style crossbars pair with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Works with Rhino Rack accessories that use Zwifloc fastening system Rubberized dual strips help reduce drag and wind noise Guides airflow over the bars to minimize wind noise while driving Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar length: 50" Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Fit kit: 5-year limited
Packing for a trip? This 93-inch-long DEK platform mounts to factory roof points with no drilling, and frees up storage in your cabin. The included light bar throws light ahead without hood glare, so the next curve doesn't come out of nowhere.Highlights Add Cargo Space Without Drilling Your Roof: Mounts to fixed factory points for a clean, low-profile fit. Built-In T-Channels for Your Gear: Slide in mounts for bikes, kayaks, skis, boards, and cargo accessories.
... Full-length aluminum crossbars provide plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Vortex crossbars, 4 RX legs, and a custom fit kit Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Rubberized Vortex strips in top channels help reduce drag and wind noise Integrated plastic locks in crossbars deter theft of channel-mount accessories Upgrade to all-metal locks (RRVA-LEC4 - sold separately) for added security Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar dimensions: 49" long x 3-1/8" wide x 1-3/16" tall Top channel dimensions: 13/16" wide x 1/4" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Fit kit: 5-year limited
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Heavy Duty crossbars, (4) 2500 Series legs, and a custom fit kit Square crossbars work with Rhino-Rack Heavy Duty accessories that mount in the top channels Compatible with ladder rollers, load stops, eyebolts, and more Rubber strips in the channels help to cushion load and provide slip resistance Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar dimensions: 50" long x 1-5/8" wide x 1-7/8" tall Top channel dimensions: 1-3/8" wide x 5/8" tall x 13/16" opening Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Fit kit: limited lifetime
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions: see below
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 5-1/2" Long U-bolts (2) U-Bolt plates for 1-3/4" springs (8) 7/16"-20 Hex nuts Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 2-3/8" Typical 3,500-lb axle Spring width: 1-3/4" Dimensions: see below
... Full-length aluminum crossbars provide plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Vortex crossbars, 4 RX legs, and a custom fit kit Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Rubberized Vortex strips in top channels help reduce drag and wind noise Integrated plastic locks in crossbars deter theft of channel-mount accessories Upgrade to all-metal locks (RRVA-LEC4 - sold separately) for added security Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar dimensions: 49" long x 3-1/8" wide x 1-3/16" tall Top channel dimensions: 13/16" wide x 1/4" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Fit kit: 5-year limited
Mount your square, 2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Made in the USA Specs: Application: 2" wide, square axle U-bolt dimensions Inner width: 2-1/8" Length: 4-1/2" Diameter: 1/2"
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 2-3/8" diameter axle Typical 3,500-lb axle U-bolt dimensions Inner width: 2-7/16" Length: 5-1/2" Diameter: 1/2"
... Aerodynamic crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 WingBar Evo crossbars, 4 Evo Fixpoint feet, and a custom fit kit for your vehicle Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Top channels with split strips let you easily slide accessories into the tracks - no trimming required Strips help reduce wind noise and vibration while you're driving Thule One-Key System locks (sold separately) deter theft of the rack and channel-mount accessories Custom installation to the fixed mounting points on your roof Specs: Crossbar dimensions: 50" long x 3-1/8" wide x 1" tall Top channel dimensions: 3/4" wide x 1/8" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
The 8 holes in this pintle plate provide 3 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2-1/2" x 2-1/2" hitch receiver. ... Features: Hitch-mounted adapter plate provides a mounting point for a pintle hook (sold separately) Shank slides into your vehicle's hitch receiver Can only be used in the drop position 3 Positions let you customize the height of the pintle Sturdy steel construction Durable, carbide black powder coat finish Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Weight capacity: 20,000 lbs Mounting plate height: 7-1/4" tall Shank length: 10-3/4" Pin hole diameter: 5/8" Mounting hole diameter: 9/16" Limited lifetime warranty
... Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 Sportz crossbars, 4 RX legs, and a custom fit kit Aero-style crossbars pair with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Works with Rhino Rack accessories that use Zwifloc fastening system Rubberized dual strips help reduce drag and wind noise Guides airflow over the bars to minimize wind noise while driving Lockable cover plates on legs secure rack to your vehicle Custom installation to the fixed mounting points on your vehicle's roof Specs: Crossbar length: 46" Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Warranty: Crossbars: limited lifetime Legs: 5-year limited Fit kit: 5-year limited
... Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 JetStream crossbars, 4 SkyLine towers, and a custom fit kit for your vehicle Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most universal cargo, water, snow, and bike carriers Push-down rubber strips in top channels let you press hardware into the tracks - no trimming needed Strips help reduce wind noise and vibration Custom installation to the fixed mounting points on your roof Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack Specs: Crossbar dimensions: 50" long x 2-3/4" wide x 1-1/8" tall Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
Mount your round, 1-3/4" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 4-1/4" Long U-bolts (175643) (2) U-Bolt plates for 1-3/4" springs (117535) (8) 3/8"-24 Hex nuts (38N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 1-3/4" Typical 2,000-lb axle Spring width: 1-3/4" Dimensions: see below
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system with Chrysler/Dodge OEM plug adapter and bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Specs: Application: Replaces factory 7-way connector on trucks and SUVs Can be used to add a connector to 2003 and newer Chrysler and Dodge pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty
The 14 holes in this pintle plate provide 6 different mounting positions for your pintle hitch so that you can match your trailer height. The shank slides inside your 2-1/2" x 2-1/2" hitch receiver. ... Features: Hitch-mounted adapter plate provides a mounting point for a pintle hook (sold separately) Shank slides into your vehicle's hitch receiver 6 Positions let you customize the height of the pintle Sturdy steel construction Durable, carbide black powder coat finish Hitch pin and clip or hitch lock sold separately Assembled in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Weight capacity: 20,000 lbs Mounting plate dimensions: Height: 12-1/2" Width: 5" Mounting holes: Vertical: 1-3/4" apart on center Horizontal: 3-3/8" apart on center Shank length: 7-1/4" from center of hitch pin hole to mounting plate Pin hole diameter: 5/8" Limited lifetime warranty Note: Can only be used in the drop position.
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Made in the USA Specs: Application: 1-1/2" wide, square axle U-bolt dimensions: Inner: 3-5/16" Long x 1-5/8" wide Overall: 3-5/8" Long x 2-3/8" wide Thread dimensions: 2-1/2" long x 3/8" diameter Mounting plate dimensions: 3-3/8" long x 3" wide Kit includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 3/8" Hex nuts and washers
This heavy duty Thule roof rack has lightweight yet strong aluminum crossbars so you can haul your gear. Each bar has three slots for mounting channel-mount accessories. Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 ProBars, 4 Evo FixPoint feet, and a custom fit kit for your vehicle Crossbars work with accessories that mount in the channels or clamp around the bars Tri-slot design provides multiple mounting options in the top, back, and bottom channels Rubber strips help reduce drag and wind noise Thule One-Key System locks (sold separately) deter theft of the rack Custom installation to the fixed mounting points on your roof Specs: Crossbar dimensions: 69" long x 2" wide x 1-1/2" tall Top channel dimensions: 13/16" wide x 1/8" tall x 3/8" opening Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Color: silver Construction: aluminum Limited lifetime warranty
... Installs to fixed mounting points on your vehicle's roof.Features: Complete roof rack system includes 2 WingBar Edge crossbars, 4 Edge Fixpoint feet, and a custom fit kit for your vehicle Flush design provides a streamlined, from-the-factory look - crossbars don't extend past feet Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Top channels with split strips let you easily slide accessories into the tracks - no trimming required Strips help reduce wind noise and vibration while you're driving Thule One-Key System locks (sold separately) deter theft of the rack and channel-mount accessories Custom installation to the fixed mounting points on your roof Specs: Crossbar dimensions: 41" long x 3-1/8" wide x 1" tall Top channel dimensions: 3/4" wide x 1/8" tall x 3/8" opening Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: aluminum Limited lifetime warranty
Mount your round, 1-3/4" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 3/8" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 1-3/4" diameter axle Typical 2,000-lb axle U-bolt dimensions Inner width: 1-7/8" Length: 4" Diameter: 3/8"
Filters
