This small heat gun allows you to easily shrink your heat shrink wire connectors in tight spaces.Features: Single-stage motor can reach up to 662-degrees F (350-degrees C) within a few seconds Perfect for sealing shrink wrap and tubing (200F to 350F), electrical repair, stripping paint, bending plastic pipe, and more Pencil-like design fits comfortably in the user's hand and weighs just over 1 pound Heat deflector protects surrounding wiring while working in tight spaces Built-in, retractable stand for hands free operation Up to 15 minutes run time Specs: Input: 110-volt, 3-amp, 360 watts Maximum temperature: 662F (350C) Air volume: 9.8 CFM Cord length: 6' with 2-pronged plug assembly
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.Features: Heavy-duty bracket holds a bow stop to protect your winch Designed to fit around a 3-1/2" wide winch Can also be mounted alone on winch stand Accepts 3" - 4" bow roller or Y-stop Bolt-on installation Does not include mounting hardware Sturdy, 11-gauge pre-galvanized steel construction Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish Made in the USA Specs: Quantity: 1 bracket Dimensions: Height: 13-3/16" Inside width: 3-11/16" Outside width: 3-15/16" Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 5-1/2" square jack foot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 5-1/2" square jack foot Diameter: 8-1/8" Weight: 3 lbs 2-Year limited warranty
The day's adventure is done. The sun's fading, but your teardrop's still baking. This compact AC hums low, sips power, and chills tight spaces fast. You can relax in cool comfort while the heat claws at the world just outside your door.Highlights Sized for Teardrops and Campers: 6,500 Btu of cooling power keep compact rigs comfortable when summer heat hits. Cool Down Without a Campground: 12V DC compressor runs off-grid and off-hookup, perfect for camping in the wild. Saves Roof Space: Super compact, mini design leaves room for solar panels or other gear.
The day's adventure is done. The sun's fading, but your teardrop's still baking. This compact AC hums low, sips 12V power, and chills tight spaces fast, keeping you cool without shore power while the heat claws at your door.Highlights Sized for Teardrops and Campers: 6,500 Btu cool compact rigs efficiently. Cool Down Without a Campground: 12V DC compressor runs off-grid and off-hookup, perfect for camping in the wild. Saves Roof Space: Super compact, mini design leaves room for solar panels or other gear.
The day's adventure is done. The sun's fading, but your teardrop's still baking. This compact AC hums low, sips power, and chills tight spaces fast. You can relax in cool comfort while the heat claws at the world just outside your door.Highlights Sized for Teardrops and Campers: 7,500 Btu cool compact rigs efficiently. Cool Down Without a Campground: 48V DC compressor runs off-grid and off-hookup, perfect for camping in the wild. Saves Roof Space: Super compact, mini design leaves room for solar panels or other gear.
The day is done, the sun is fading, but your teardrop's still baking. This compact AC hums low, sips 48V DC power, and chills tight spaces fast. You can relax in cool comfort while the heat claws at the world just outside your door.Highlights Sized for Small Rigs: 8,500 Btu cool teardrop trailers and truck campers efficiently. Cool Down Without a Campground: 48V DC compressor runs off-grid and off-hookup, perfect for camping in the wild. Saves Roof Space: Super compact, low-profile design leaves room for solar panels or other gear.
A worn bow roller can leave marks or let the bow contact the stand. This amber PVC assembly cushions contact and helps center the boat, with end bells adding side protection so you can load and transport with the bow supported.Centers Your Boat: Roller assembly helps guide the bow into position during trailer loading. Reduces Bow Stand Contact: Alignment design helps keep the bow centered and limit contact with the bow stand. Supports the Bow in Transit: Roller construction supports the boat and helps absorb road shock during transport.
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. ... Features: Heavy-duty winch stand supports a winch on your trailer's 2" tongue 14 Mounting holes allow you to adjust height of winch during installation Sturdy, hot-dipped galvanized, 12-gauge steel construction Made in the USA Specs: Application: 2" trailer tongues Dimensions: 30" tall x 2" wide This winch stand mounts on your trailer by clamping around the 2" wide tongue.
Secure your boat fast - 3" x 4" winch standstands 36" tall with a 42" reach and a 60 degree seat for tall bows and anchor clearance. Hot dipped galvanized for marine corrosion resistance. ... That added angle improves strap alignment and clearance when loading. Why Go with a Stand with 42" Reach? A stand with a longer reach gives you more flexibility when setting winch height. The 36" platform position helps reduce strap drag and awkward angles.
Minimize the amount of cranking needed to position your jack, and eliminate the need for wood or cinderblocks when storing your trailer. Jack stand provides a sturdy platform that evenly distributes your trailer weight.Features: Jack stand provides a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Wide, round base helps to distribute weight of trailer to prevent sinking into soft ground Light weight makes it easy to move and store Durable polyethylene construction Distinctive red color catches your eye Specs: Weight capacity: 5,000 lbs Dimensions: 8-5/8" diameter x 8-3/8" tall Note: Not designed to be used with trailer jacks with wheels or casters.
... The 6-ton bottle jack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Rig: 6-ton Tallboy jack raises the vehicle, while the 6-ton stand supports it during service. Reach High-Clearance Setups: Jack lifts from 8-1/2" to 37-3/4", and the stand supports from 10-13/16" to 28-3/4".
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.The stand supports loads up to 6 tons. Pack the Pieces Together for Travel Modular equipment is easier to carry when everything stays together.
... The 2-ton bottle jack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Powersports Rig: 2-ton Tallboy jack raises the vehicle, while the 6-ton stand supports it during service. Work Across Different Heights: Jack lifts from 7-15/16" to 26-3/4", and the stand supports from 10-13/16" to 28-3/4".
Eliminate the need for wood or cinderblocks when leveling your trailer. Camco's trailer tongue jack stand provides a sturdy platform that evenly distributes your trailer weight and prevents slipping. The UV-stabilized jack can support 5,000 lbs.Features: Evenly distributes the weight of the tongue Eliminates the need for bulky blocks of wood or cinderblocks 5,000 lb weight rating Durable, UV stabilized resin Lightweight and easy to store Made in the USA Note: Not designed to be used with trailer jacks with wheels or casters. 44635 Camco Trailer Tongue Jack Stand - 5,000 lbs
2-Ton vehicle jacks can be ratcheted up and down for easy height adjustment, making it easier to change your flat tire or to get up under your vehicle for minor repairs. Always use jack stands in pairs for safety.Features: Position these 2-ton jack stands under your vehicle at the manufacturer-indicated load support points Adjusting the height is easy with the ratchet-style lifting mechanism Hold control lever up while lifting the saddle shaft to your desired height Push control lever down to lock pawl into teeth located in center column Carefully lower vehicle to desired height Specs: Capacity: 2 tons Lift height measurements: Minimum height: 10-3/4" Maximum height: 16-3/4" Base dimensions: 6-11/16" long x 6-15/16" wide Quantity: 2 jacks 1-Year limited warranty Note: Always use jacks in pairs.
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.After you have the vehicle lifted to the desired height, the jack will automatically lock into place. The Unijack will then double as a jack stand to support the lift. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
This winch stand mounts to your boat trailer tongue and lets you adjust its position up to 48" for smooth loading and launching. The heavy-duty 3" x 4" post features a 45-degree angled design and a corrosion-resistant finish.Features: Adjustable winch stand assembly for mounting a winch Heavy-duty 3" x 4" upright post provides strong support Compatible with many 2,000 lb to 3,500 lb trailer winches, including DL2000A, DL2500A, DL3200A, T2605S, T2605, T2000S, T3205, WINCH 2500, and WINCH 3500 45-degree angled design helps align the winch with the bow stop and boat eye Adjustable height up to 48" for proper winch positioning Corrosion-resistant, hot-dipped galvanized finish for marine and utility trailer use Specs: Application: Boat trailer winch stand Top mounting plate dimensions: 12" long x 5" wide Bottom mounting plate dimensions: 15" long x 5" wide Post dimensions: 3" x 4" Maximum height: 48" Minimum height: 26" Angle: 45 degrees Finish: Hot-dipped galvanized Quantity: 1 winch stand assembly
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jack stands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jack stands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jack stands with 10 lock-safe settings Jack stand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jack stand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
Easily and safely store your camper by using this kit to build a sturdy stand. Pair the supplied brackets and hardware with 2x6 lumber (not included) to create 2 saw-horse-type supports that will each measure 30" tall x 50" long.Features: Camper stand helps support your truck bed camper when it's in storage Place the 2 sturdy trestles beneath your camper to support its weight when it's removed from your truck bed Lumber for support beams and legs not included Grade 2 or higher Douglas Fir 2x6 lumber - with no knots - is required to maintain stand capacity (2) 50" Long 2x6 pieces of wood create support beams (8) 30" Long 2x6 pieces of wood needed for use as legs Powder coated steel brackets resist corrosion Necessary hardware included Specs: Weight capacity: 6,000 lbs Dimensions of each support (when assembled with lumber): 35" tall x 50" long 5-Year warranty
Easily and safely store your camper by using this kit to build a sturdy stand. The supplied parts create 2 saw-horse-type supports that each measure 30" tall x 50" long. Powder coated steel brackets, 2x6 lumber, and hardware included.Features: Camper stand helps support your truck bed camper when it's in storage Place the 2 sturdy trestles beneath your camper to support its weight when it's removed from your truck bed (2) 50" Long 2x6 pieces of wood create support beams (8) 30" Long 2x6 pieces of wood included for use as legs Powder coated steel brackets resist corrosion Necessary hardware included Holes not pre-drilled in wood Specs: Weight capacity: 6,000 lbs Dimensions of each support (when assembled): 35" tall x 50" long 5-Year warranty
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.The 5" width spreads load across more board, which helps stop dents, squeaks, and slow drift after a few launches. Built from 1/4" hot-dip galvanized steel, this bracket stays stiff under load and stands up to the water you tow through. Specs Application Quantity: 1 bracket For vertical bunk board support on aluminum boat trailers Dimensions and Weight Overall dimensions: 10" long x 5" wide x 1/4" thick Weight: 3.5 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
Filters
