7-7/16" x 1-5/8" Rectangular, surface-mount load ramp light with 4 LEDs produces a bright white beam to illuminate a wide area. Powder coated black aluminum housing resists impact and corrosion. ... Features: Rectangular, LED light emits a powerful white light so you can easily see your ramp while loading Aluminum construction and built-in heat sink protect against overheating Black powder coat resists corrosion LEDs are energy efficient, long-lasting, and vibration resistant Surface mount unit installs with 2 screws (not included) Hardwires to your application 12V compatible Specs: Overall dimensions: 7-7/16" wide x 1-5/8" tall x 1-3/4" thick Light output: 2,000 lumens Diodes: 4 Input voltage: 9V - 30V Power draw at 12V: 1.3 amps - 1.9 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
An over 80" ID bar and white loadlight built into one housing. Keep wide trailers properly marked on the road or switch on bright white light for backing into tight spots, loading equipment, or setting up at camp after dark.Over 80" ID Bar And Load Lamp: Red/white combo keeps wide trailers marked and lights up the work area. Add 500 Lumens Of Work Light: White LEDs provide usable light for backing, loading, and campsite tasks.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end.And this is what leads to hyperflashing. This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing by mimicking the power draw of an incandescent light.
This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and a pigtail connection on the other end.And this is what leads to hyperflashing. This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing by mimicking the power draw of an incandescent light.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Because LED bulbs have little resistance on their own, they create a "hyperflash" situation when used in turn signals. This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
Guard against LED-related turn signal problems with this load-resistor kit. Simple, effective system builds resistance that corrects flash timing, thereby preventing the "hyperflash" phenomenon that occurs with LED indicators.Because LED bulbs have little resistance on their own, they create a "hyperflash" situation when used in turn signals. This fast flashing is similar to what your factory signal light does when the bulb is about to burn out. To prevent this phenomenon, install a load-resistor kit along with your new LEDs. This kit will build additional resistance in the line to correct the flash timing, resulting in a properly functioning indicator.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status. If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
17" Long x 1-3/8" tall x 1" deep. Waterproof identification light bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Dark outdoor areas stay unevenly lit, leaving shadows that hide obstacles and limit what you can see. This telescoping 2,000-lumen LED raises light up to 10 feet for wide overhead coverage, so you can clearly see and work across a large area.Stable Tripod Setup: Spring-loaded legs and included ground stakes keep the light positioned during outdoor use. Features to know about Wide Overhead Light Coverage Dark campsites, driveways, and outdoor work areas can leave shadows where gear and obstacles disappear.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 4,000 lumen light up to 10 feet for wide overhead coverage, so you can see clearly and work across the entire area.Tripod Setup with Case Stays Organized in the Field Portable area lights lose their advantage when the stand, stakes, and cords end up scattered between trips. This setup includes a heavy-duty tripod base with spring-loaded legs, tripod ground stakes that store in the tripod feet, and an EVA molded foam protective case with waterproof zipper.
Dark campsites leave large areas unevenly lit, with shadows hiding obstacles and work surfaces. This telescoping LED lantern lifts a 1,200 lumen light up to 9 feet for wide overhead coverage, so you can see clearly and work across the entire area.This setup includes a heavy-duty tripod base with spring-loaded legs, lantern, and a nylon carry bag. Everything packs together for transport and storage, so you can deploy the full light setup and pack it back out without hunting for loose parts.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use integrated toggle switch to turn this single dome light on and off, or you can adjust the brightness. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
Use the integrated switch or wire to a light switch to turn the single dome light on and off. Included incandescent bulb and acrylic lens are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim old lights in your horse trailer? This dome light gives you bright yellow, incandescent light underneath a kitchen cabinet, in a walkway, by a workbench, or inside your enclosed trailer.
Use integrated toggle switch or wire to a light switch to turn this single dome light on and off. Included incandescent bulb is perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use integrated toggle switch or wire to a light switch to turn this double dome light on and off. Included 2 incandescent bulbs are perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
Use the integrated switch to turn this waterproof single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Effective Lumens Lumens are utilized to measure the actual amount of light that you can see and use from a light source. If you need a super bright light for a workspace, you will want to go with a light that has a higher lumen count.
Filters
