The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. ... Features: Hydraulic right/street-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and left/curb-side leg (e83VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
The counter-balance valve integrated into this hydraulic jack eliminates drift and retraction while your trailer is stationary. It's ideal for a seasonal trailer that may sit for awhile, and it makes a great upgrade. ... Features: Hydraulic left/curb-side jack leg works with your existing hydraulic setup Hydraulic pump and power unit (e43VV) and right/street-side leg (e23VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Integrated counter balance valve eliminates drift and retraction Great for seasonal trailers Smooth and effortless operation, even for heavy loads Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 35-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Mounting tabs: 7-1/2" x 4" Footplate dimensions: 10" long x 10" wide 1-Year warranty
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is less than 10" from the ground, then use a flip-up jack with a 4" extension (FA88-00-4500 - sold separately) instead.
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.If the outer tube is more than 10" from the ground, then use a flip-up jack with a 6" extension (FA88-00-6500 - sold separately) instead.
... Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. Includes 2 jacks and 1 handle.Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and 1,500 psi retraction pressures Welds on Provides stability with large, pivoting footplate Black paint finish Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Foot pad: 10" long x 10" wide Quantity: 1 leg 1-Year warranty
... Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.Support the front of your cargo trailer so you can load it or unload it without the trailer rocking or tipping. Or level your pop-up for a night at the campground.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.The 30-amp motor ensures trouble-free operation and consistent power with the flip of a switch - no need for a crank. It also has helical-cut gears, which have angled teeth that mesh together clearly. This allows for quieter, more efficient operation than a jack that uses a standard Acme screw.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Total lift: 23" Travel: 18" Drop leg: 5" Lift capacity: 5,000 lbs Outer tube diameter: 2-3/16" Inner tube diameter: 1-15/16" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included for making a good ground from jack to trailer Mounting hardware sold separately Specs: Total lift: 23" Screw travel: 18" Drop leg: 5" Lift capacity: 4,500 lbs 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. Durable steel construction with a powder coat finish to resist corrosion.Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 75-1/4" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on or weld-on installation for A-frame trailers 3-Star washer included to ensure good ground connection Mounting holes fit 3" spacing Specs: Bracket height: 8-1/2" Retracted 27-1/2" Extended Total Lift: 24" Travel: 19" Drop leg: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 32.2 seconds Retracts 6" in 28.4 seconds Clearance from bottom of mounting plate to top of jack 23" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set up your camper at night Also ease weight distribution hookup and disconnect Bubble level on top of housing helps you level your trailer Bull's-eye design shows front to back and side to side Drop leg allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements White cover is painted to resist yellowing Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on or weld-on installation for A-frame trailers 3-Star washer included to ensure good ground connection Mounting holes fit 3" spacing Specs: Bracket height: 8-1/2" Retracted 27-1/2" Extended Total Lift: 24" Travel: 19" Drop leg: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 32.2 seconds Retracts 6" in 28.4 seconds Clearance from bottom of mounting plate to top of jack: 23" Lift capacity: 3,500 lbs Outer tube diameter: 2-3/16" Inner tube diameter: 1-15/16" Footplate diameter: 5-1/2" Power wire: 10 gauge Motor draws 30 amps under load 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Solid rubber tire with steel rim can easily track through mud. Dacromet finish offers great rust protection. 10" Screw travel.Features: Supports, lifts, and lowers your boat or recreational trailer Takes you places plastic caster wheels can't Flat-free rubber tire never needs to be inflated Steel wheel provides excellent stability Stows safely out of the way for travel and can be removed and stored elsewhere when needed Resists rust and corrosion with premium Dacromet finish Lasts for years thanks to durable steel construction Bolts around trailer tongue Hardware not included Designed in Austraila to stand up to the rigors of the Outback Specs: Total lift: 10" Load capacity: 1,102 lbs 1-Year limited warranty
Surge actuator features a corrosion-resistant composite master cylinder and durable zinc plating with a 200-hour salt spray rating. Adjustable up channel lets you mount coupler attachments (sold separately) in 1 of 3 positions. 2-Hole bolt-on case.This is because the adjustable channel is positioned so that the mounted coupler can sit above the actuator tube, allowing for a greater rise than with a standard center-mounted channel. As a result, you can line up your low trailer with your tow vehicle's hitch for a level setup. Alternatively, if you have a standard trailer paired with a lifted tow vehicle, then this channel-up design will help you achieve a level towing setup for this type of application as well.
Surge-type actuator features a rustproof aluminum master cylinder and a primed finish. Adjustable up channel lets you mount different coupler attachments (sold separately) in 1 of 3 positions. Weld-on application.This is because the adjustable channel is positioned so that the mounted coupler can sit above the actuator tube, allowing for a greater rise than with a standard center-mounted channel. As a result, you can line up your low trailer with your tow vehicle's hitch for a level setup. Alternatively, if you have a standard trailer paired with a lifted tow vehicle, then this channel-up design will help you achieve a level towing setup for this type of application as well.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Adjustable up channel lets you mount different coupler attachments (sold separately) in 1 of 3 positions. Bolt-on or weld-on application.This is because the adjustable channel is positioned so that the mounted coupler can sit above the actuator tube, allowing for a greater rise than with a standard center-mounted channel. As a result, you can line up your low trailer with your tow vehicle's hitch for a level setup. Alternatively, if you have a standard trailer paired with a lifted tow vehicle, then this channel-up design will help you achieve a level towing setup for this type of application as well.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Adjustable up channel lets you mount different coupler attachments (sold separately) in 1 of 3 positions. Bolt-on or weld-on application.This is because the adjustable channel is positioned so that the mounted coupler can sit above the actuator tube, allowing for a greater rise than with a standard center-mounted channel. As a result, you can line up your low trailer with your tow vehicle's hitch for a level setup. Alternatively, if you have a standard trailer paired with a lifted tow vehicle, then this channel-up design will help you achieve a level towing setup for this type of application as well.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. Adjustable up channel lets you mount different coupler attachments (sold separately) in 1 of 3 positions. Weld-on application.This is because the adjustable channel is positioned so that the mounted coupler can sit above the actuator tube, allowing for a greater rise than with a standard center-mounted channel. As a result, you can line up your low trailer with your tow vehicle's hitch for a level setup. Alternatively, if you have a standard trailer paired with a lifted tow vehicle, then this channel-up design will help you achieve a level towing setup for this type of application as well.
No more sweat and crank struggles! With a simple toggle switch mounted behind the tank, this jack takes smooth and powerful to the next level. Easy install - fits right into the existing holes from most standard tongue jacks. Upgrade made simple.Features: Hydraulic jack is built for bumper pull trailers Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Easy bolt-on installation, no welding required Complete installation package included Includes hardware, mounting brackets, hydraulic lines, fittings, battery cable, and breaker Requires only 2 quarts of ATF Dexron III (not included) for operation Easy to use Weatherproof control box with a keyed lockout extends/retracts with the flip of a toggle switch 12-Volt battery source is required Round tube Black gloss powder coated finish keeps everything protected and looking good Made in the USA Specs: Lift capacity: 8,000 lbs Working pressure load: 2,500 psi Reservoir capacity: 98 oz Footplate diameter: 7" 1-Year warranty on cylinder
Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Travel makes this jack ideal for multiple agricultural and commercial applications.Features: Utility jack lets you raise and lower your A-frame trailer Perfect for agricultural and commercial applications Topwind handle has textured grip for easy cranking Easily flip between cranking and stored positions Drive-nut option lets you use your power drill and 3/4" socket head (not included) for faster operation Black powder coat finish resists corrosion Removable foot pad with locking pin included Specs: Bracket Height: Retracted: 9-3/4" Extended: 23-1/2" Lift: 14" Clearance: 13-1/8" From bottom of mounting bracket to top of jack 16-1/2" From bottom of mounting bracket to top of handle Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6" Footplate diameter: 5-3/8" Lift capacity: 2,000 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Filters
