Replaces a lost or damaged wedge-shaped, white polypropylene lid for your Ventline E-Z Lift Ventadome RV roof vent.Features: Replaces a lost or damaged wedge-shaped dome on your Ventline E-Z Lift Ventadome roof vent Fits V3092-601-00, V3092-603-00, V3094-601-00, V3094-601-00C, V3094-603-00, and V3094-603-00C Durable polypropylene construction White color Made in the USA
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.Features: Roof vent allows fresh air to enter and heat to escape while your RV, camper, or enclosed trailer remains locked and secure Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design - no need for electrical wiring White, 1/4" think mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Limited 2-year warranty Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
Open this roof vent quickly and easily with the gear-free, spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Screen snaps out for easy cleaning. Installation kit and garnish sold separately.Features: Roof vent allows fresh air to enter and heat to escape while your RV, camper, or enclosed trailer remains locked and secure Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design - no need for electrical wiring White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Limited 2-year warranty Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
Replaces a lost or damaged wedge-shaped, smoke-colored polypropylene lid on your Ventline E-Z Lift Ventadome RV roof vent.Features: Replaces a lost or damaged wedge-shaped dome on your Ventline E-Z Lift Ventadome roof vent Fits V3092-601-00, V3092-603-00, V3094-601-00, V3094-601-00C, V3094-603-00, and V3094-603-00C Durable polypropylene construction Smoke color Made in the USA
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.Features: Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, 8-blade, single-speed fan On/off switch is mounted to vent Fan rotates counterclockwise Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials 2-Wire design Black wire is power White wire is ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Overall fan diameter: 5" Fan shaft diameter: 0.091" Fan capacity: 100 CFM Power draw: 1.2 amps Limited 2-year warranty Note: Not for use above tubs, showers, or range cooking surfaces. Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.Features: Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, 8-blade, single-speed fan On/off switch is mounted to vent Fan rotates counterclockwise Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable white polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design Hidden junction box for a clean look White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials 3-Wire design Black wire is power White wire and green wire are ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Canada approved ETL listed Conforms to UL and CSA standards Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Overall fan diameter: 5" Fan shaft diameter: 0.091" Fan capacity: 100 CFM Power draw: 1 amp Limited 2-year warranty Note: Not for use above tubs, showers, or range cooking surfaces. Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.Features: Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, 8-blade, single-speed fan On/off switch is mounted to vent Fan rotates counterclockwise Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials 2-Wire design Black wire is power White wire is ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Overall fan diameter: 5" Fan shaft diameter: 0.091" Fan capacity: 100 CFM Power draw: 1.2 amps Limited 2-year warranty Note: Not for use above tubs, showers, or range cooking surfaces. Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately.Features: Roof vent has a fan that pushes stale air out of your RV, camper, or enclosed trailer Vent allows air to circulate while your RV remains locked and secure 12V DC, 8-blade, single-speed fan On/off switch is mounted to vent Fan rotates counterclockwise Easy-to-use handle lets you quickly open and close the vent from inside your RV Spring-loaded handle locks into 10 different positions No gears - opens vent faster than a standard crank handle or hand knob Ergonomic T-shape is easy to grip Aerodynamic, wedge-shaped dome (or lid) is made of durable smoke-colored polypropylene Translucent dome allows some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design Hidden junction box for a clean look White, 1/4" thick mounting flange is built in UV-resistant, long-lasting specialty polymer plastic construction Smooth edges won't cut you during installation Works well with all roofing materials 3-Wire design Black wire is power White wire and green wire are ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold separately) Canada approved ETL listed Conforms to UL and CSA standards Made in the USA Specs: Rough opening size: 14-1/4" wide x 14-1/4" long Overall dimensions (outside of flange to outside of flange): 16-1/2" wide x 16-1/2" long Vent extends above roof: 4" When closed 9-1/2" When fully open Overall fan diameter: 5" Fan shaft diameter: 0.091" Fan capacity: 100 CFM Power draw: 1 amps Limited 2-year warranty Note: Not for use above tubs, showers, or range cooking surfaces. Spring-Loaded Handle on Ventline E-Z Lift Ventadome The easy-to-use handle on the E-Z Lift Ventadome lets you quickly open and close the roof vent from inside your RV.
This all-steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball, 14,000 lbs with the 2-5/16" ball, and offers the convenience of a 8" drop or 8" rise. Fits 2" trailer hitches.Features: Adjustable ball mount with reversible, 2" and 2-5/16" diameter hitch balls 2-Sided platform has 2" diameter ball on one side and 2-5/16" diameter ball on the other Hitch balls secure to ball housing with included pin that allows for easy interchangeability Ball mount adjusts in 1" increments up to 8" drop and 8" rise with just a pull of the included pin Lets you tow various trailers and keeps them level with your vehicle for safer towing Offers ease of use for a fleet of vehicles with a variety of towing needs Heavy-duty, all-steel construction Meets V5 and SAE J684 certifications Made in the USA Specs: Fits 2" x 2" hitch receivers Ball diameters: 2" and 2-5/16" Measurement from center of hitch pin hole to center of ball pin hole: 7" Towing capacity: 10,000 lbs GTW with 2" hitch ball 14,000 lbs GTW with 2-5/16" hitch ball Tongue weight: 1,500 lbs Maximum rise: 8" from top of the inside of receiver Maximum drop: 8" from top of the inside of receiver 1-Year limited warranty Tow up to 14,000 lbs with the safety and convenience of the adjustable 8" drop and 8" rise on the EZ Hitch ball mount system. Turn the ball mount over to select a drop or rise. After the ball mount has been installed on your vehicle, just pull the included pin to adjust the combo ball up or down or to flip the combo ball between the 2" or 2-5/16" hitch ball as needed.
This wheel chock snaps into your floor-mounted E track or X track so you can stabilize your motorcycle on your trailer. Secure the wheel with a tie-down strap (sold separately). Steel construction is strong and corrosion resistant.Features: Wheel chock helps to stabilize the front or rear wheel of your motorcycle Perfect for use on your utility trailer or in your enclosed trailer Rubber pad on base helps protect your trailer floor from scratches and scuffs Spring-loaded fittings snap into floor-mounted E track or X track anchor points Chock can be easily moved from one E track or X track slot to another Mounting holes let you permanently install chock on your trailer - hardware not included Tie-down strap (sold separately) lets you secure front wheel to chock Durable steel construction with black powder coat finish is corrosion resistant Specs: Application: tires up to 7" wide Distance between fittings: 12" Dimensions: 14-1/2" wide x 12" deep x 12" tall Weight: 6 lbs 1-Year limited warranty
... Can also be used with floor-mounted tracks.Features: Holder lets you store your spare tire up and off the floor of your enclosed trailer Can also be used with floor-mounted tracks to prevent tire from sliding Holds most automobile, trailer, and ATV tires Easy installation - just snap spring-loaded fitting into E-track or X-track anchor points Holder can be easily moved from one E-track or X-track slot to another Simple to use - just slide spare tire onto post and secure with included nut Fits through any lug hole on tire rim Durable steel construction with yellow zinc coating is corrosion resistant Specs: Post dimensions: 5-5/8" long x 1/2" diameter Nut size: 19 mm 1-Year limited warranty
This holder lets you secure your fire extinguisher to the E track or X track in your enclosed trailer or workshop. Simply set your fire extinguisher on the platform and use the cinch straps to secure it to the holder.Features: Space-saving holder secures your fire extinguisher in your enclosed trailer or workshop Gets extinguisher off floor and enables quick access in emergencies Integrated platform supports fire extinguisher 2 Polyester cinch straps secure fire extinguisher to holder Easy installation - just snap spring-loaded fitting into E track or X track anchor points Holder can be easily moved from one E track or X track slot to another Durable steel construction with corrosion-resistant zinc finish Specs: Maximum fire extinguisher diameter: 8" Weight capacity: 50 lbs Dimensions: 17-1/2" tall x 8-1/4" wide x 6" deep Weight: 4.74 lbs 1-Year limited warranty
This cargo net secures cargo to the E track or X track in your enclosed trailer. Simply clip the net to your tracks and use the integrated cam buckles to adjust the net so that it's snug around your cargo. 3,600 Max load.Features: Cargo net lets you secure your cargo in your enclosed trailer Prevents stacked boxes from tipping over Creates barrier to stop loose items from rolling around Integrated cam buckles let you tighten net to fit snugly around cargo Easy installation - just snap spring-loaded fitting into E track or X track anchor points Net can be easily moved from one E track or X track slot to another High-visibility orange polyester webbing is strong and resistant to tears Specs: Safe working load limit (WLL): 1,200 lbs Maximum load (break strength): 3,600 lbs Length: 96" Adjustable width: 68" - 84" Weight: 6.5 lbs 1-Year limited warranty
Large wire basket lets you store gardening tools, cable, sports equipment, and other items on your E track or X track. Easy to reposition between track slots. Durable steel construction.Features: Large wire basket provides space-saving storage for trailer and garage accessories Stores gardening tools, cable, sports equipment, and other items Built-in handles make it easy to carry from garage to trailer Spring-loaded fitting clips into E track or X track system Basket can be easily moved from one E track or X track slot to another Mesh design allows you to see what's in the basket Gray-painted steel construction is strong and durable Specs: Dimensions: 18" deep x 12" long x 20" wide Weight capacity: 100 lbs Weight: 5.5 lbs 1-Year limited warranty
Small lubricant shelf with dividers for your E track or X track lets you organize cans and bottles in your enclosed trailer or workshop. Windows on the front panel let you easily see the labels on stored items.Features: Small lubricant shelf provides space-saving storage in your enclosed trailer or workshop 3 Adjustable dividers let you separate and organize oil cans, brake fluid, and other cans and bottles Windows on front panels let you see labels on cans and bottles without pulling them off the shelf Easy installation - just snap spring-loaded fitting into E track or X track anchor points Bin can be easily moved from one E track or X track slot to another Durable steel construction with gray powder coat finish Specs: Dimensions: 18-3/4" wide x 6" tall x 6" deep Weight: 3 lbs 1-Year limited warranty
This tool holder lets you secure a weed whacker, hedge trimmer or long-handled tool to the E track or X track in your enclosed trailer or workshop. Easy to reposition between track slots.Features: Tool holder let you hang items horizontally in your enclosed trailer or workshop Secures a weed whacker, pole saw, hedge trimmer or other large, long-handled tool Spring-loaded clamps let you quickly access your tools Easy installation - just snap spring-loaded fitting into E track or X track anchor points Clamps can be adjusted along E track or X track to accommodate tool length Heavy-duty steel construction with corrosion-resistant zinc finish Specs: Dimensions (each): 5-3/4" tall x 2" wide x 8-5/8" deep Weight capacity: 200 lbs Weight (each): 5.3 lbs 1-Year limited warranty
These brackets let you store a toolbox, cooler or other flat-bottomed object on the E track or X track in your enclosed trailer. Simply adjust the brackets to fit your item, wrap the straps around it, and tighten until snug.Features: Dual brackets provide off the floor storage for bulky items Stores coolers, tool boxes, and other flat-based cargo Adjustable bases accommodate cargo of different sizes Hand knobs tighten bases in position Lips on bases prevent cargo from sliding off brackets Holes in lips provide additional anchor points for tie-down straps Spring-loaded fitting clips into E track or X track system Brackets can be easily moved from one E track or X track slot to another Polyester straps with side-squeeze buckle secure cargo to brackets Heavy-duty steel construction Specs: Weight capacity: 300 lbs Arm height: 9-1/8" Lip height: 1-3/4" Adjustable depth: 8-3/4" - 10-3/4" Weight (each): 6.6 lbs 1-Year limited warranty
This accessory bar lets you store paper towels, cables, and other small items on the E track or X track in your enclosed trailer or workshop. Long handle is perfect for rolled items. Easy to reposition between track slots.Features: Light-duty accessory bar stores paper towels, straps, cables, and other small items in your enclosed trailer or workshop Plastic, screw-on knob helps secure rolled items on handle Easy installation - just snap spring-loaded fitting into E track or X track anchor points Handle can be easily moved from one E track or X track slot to another Durable steel construction Specs: Bar dimensions: 11" long x 1" diameter Distance from bracket to handle: 4-11/16" 1-Year limited warranty
Large bin lets you store gloves, tape measures, spray nozzles, and other items on the E track or X track in your enclosed trailer or workshop. Easy to reposition between track slots. Durable plastic construction.Features: Large bin provides storage for gloves, tape measures, spray nozzles, and other items Spring-loaded fitting clips into E track or X track system Bin can be easily moved from one E track or X track slot to another Lightweight yet durable plastic construction Specs: Dimensions: 6" deep x 12" long x 6" wide Weight capacity: 100 lbs Weight: 2.4 lbs 1-Year limited warranty
Small wire basket lets you store gardening tools, household cleaners, sports equipment, and other small items on your E track or X track. Easy to reposition between track slots. Durable steel construction.Features: Small wire basket provides space-saving storage for trailer and garage accessories Stores gardening tools, household cleaners, sports equipment, and other small items Spring-loaded fitting clips into E track or X track system Basket can be easily moved from one E track or X track slot to another Mesh design allows you to see what's in the basket Gray-painted steel construction is strong and durable Specs: Dimensions: 12" deep x 12" long x 6" wide Weight capacity: 50 lbs Weight: 2.4 lbs 1-Year limited warranty
These brackets let you create a shelf on the E track or X track in your enclosed trailer or workshop. Use included screws to secure a 12" wide board to the brackets. Easy to reposition between track slots.Features: Brackets let you create a shelf in your garage or workshop Requires board (not included) up to 12" wide Spring-loaded fittings connect to both X track and E track anchoring systems Brackets can be easily moved from one E track or X track slot to another Included screws allow you to secure board to brackets Drill screws up through mounting bracket holes into bottom of board Heavy-duty steel construction with yellow zinc finish is corrosion resistant Specs: Quantity: 2 brackets Dimensions (each): 8-1/8" deep x 4-1/4" tall Distance between mounting bracket holes (center to center): 1-5/16" Weight capacity: 1,000 lbs Weight (each): 4.5 lbs 1-Year limited warranty
This loop handle for E track and X track gives you extra support when stepping into your enclosed trailer. It's great for use if your trailer doesn't have steps or if you just aren't as limber as you used to be.Features: Soft loop handle provides support when stepping into or moving around in your enclosed trailer Easy installation - just snap spring-loaded fitting into E track or X track anchor points Handle can be easily moved from one E track or X track slot to another Flexible design is easy to use from any angle High-visibility orange polyester webbing is strong and resistant to tears Specs: Dimensions: 13" long x 2" wide Weight capacity: 300 lbs 1-Year limited warranty
These adjustable bungee straps let you secure a ladder, scaffolding, and other long, thin items to the e track or X track in your enclosed trailer or workshop. Stretchable polyester and wide contact surface ensure a snug fit.Features: Adjustable bungee straps secure a ladder, scaffolding, and other long, thin items in your enclosed trailer or workshop Buckles on straps let you easily adjust length Wide contact surface grips cargo better when compared with standard bungee straps Easy installation - just snap spring-loaded fittings into e track or X track anchor points Straps can be easily moved from one e track or X track slot to another Stretchable polyester and rubber construction provides snug fit Specs: Quantity: 2 straps Adjustable length: 16" - 24" long Width: 2" 1-Year limited warranty
This utility bag is perfect for storing documents, rope, tools, and other small accessories on the E track or X track in your enclosed utility trailer. Easy to reposition between track slots.Features: Utility bag holds documents, rope, tools, and other small accessories in your enclosed trailer or workshop Protects items from dirt and dust Easy installation - just snap spring-loaded fitting into E track or X track anchor points Bag can be easily repositioned along the E track Durable nylon construction resists tears Specs: Dimensions: 24" long x 14" deep x 4" wide Storage capacity: 22 liters (1,344 cu in) Weight capacity: 50 lbs Weight: 1.34 lbs 1-Year limited warranty
Filters
