This kit lets you install your CargoSmart X-track or E-track to your truck, trailer, van, or garage wall. It includes 8 screws for installing the track on a solid surface and 16 toggle bolts for installing the track on a hollow wall.Features: Hardware kit comes with everything you need to mount your 60" E-track or X-track system (sold separately) 8 Philips head wood screws let you mount to solid surface 16 Toggle bolts let you mount to hollow wall Specs: Screw and bolt dimensions: 3" long x 1/4" diameter Pull-out strength rating: 200 lbs Shear-strength rating: 200 lbs 1-Year limited warranty
This kit lets you install your CargoSmart X track or Etrack to your truck, trailer, van, or garage wall. It includes 4 screws for installing the track on a solid surface and 8 toggle bolts for installing the track on a hollow wall.Features: Hardware kit comes with everything you need to mount your 24" Etrack or X track system 4 Philips head wood screws let you mount to solid surface 8 Toggle bolts let you mount to hollow wall Specs: Screw and bolt dimensions: 3" long x 1/4" diameter Pull-out strength rating: 200 lbs Shear-strength rating: 200 lbs 1-Year limited warranty
These steel backing plates for (4) 8' E-tracks in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt the plates to your E-tracks on the opposite side of the wall or under the floor.Features: Backing plates provide extra support for your 8' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates compatible with horizontal or vertical E-tracks Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach each plate to E-track, evenly spaced, on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 16 backing plates Dimensions (each): 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
This steel backing plate for the E-track or D-ring in your enclosed trailer provides more support than just securing it with wood or metal screws. Bolt the plate to your E-track on the opposite side of the wall or under the floor.Features: Backing plate provides extra support for your E-track or D-ring (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plate compatible with E-tracks, D-rings, and single tie-down anchors Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach plate to E-track or D-ring on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 1 backing plate Dimensions: 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These steel backing plates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Features: Backing plates provide extra support for your 8' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates compatible with horizontal or vertical E-tracks Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach each plate to E-track, evenly spaced, on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 4 backing plates Dimensions (each): 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These steel backing plates for the 2' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Features: Backing plates provide extra support for your 2' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates compatible with horizontal or vertical E-tracks Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach each plate to E-track, evenly spaced, on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 2 backing plates Dimensions (each): 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These steel backing plates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.Features: Backing plates provide extra support for your 5' E-track (sold separately) Perfect for use in an enclosed trailer with a thin wall or floor Multiple pre-drilled holes make plates compatible with horizontal or vertical E-tracks Galvanized steel construction is strong and corrosion resistant Simple, bolt-on installation with included hardware Attach each plate to E-track, evenly spaced, on the opposite side of the wall or under the floor Made in the USA Specs: Quantity: 3 backing plates Dimensions (each): 6" long x 6" wide x 1/8" thick 4-Bolt mounting pattern: 4-1/2" x 4" Limited lifetime warranty Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These high-strength zinc carriage bolts, fender washers and self-locking Nyloc nuts offer a quick, easy way for 1 person to install 2 square-mounting-hole Snap-Loc single-slot E-track tie-down anchors (sold separately) on wood or metal surfaces.Features: Use to install 2 Snap-Loc E-track tie-down anchors that have square mounting holes Allows one person to quickly and easily mount Snap-Locs on a truck or trailer Won't spin during installation like an Allen bolt would Includes 4 heavy-duty zinc carriage bolts, 4 fender washers and 4 Nyloc self-locking nuts Specs: Dimensions: Carriage bolts: 1" long x 5/16" diameter, coarse Fender washers: 1-1/2" diameter Nyloc nuts: 5/16" diameter
Replaces the mountinghardware for etrailer storage bin for E-track systems (e75JR). Made from zinc-plated steel.Features: Replaces the mountinghardware for etrailer storage bin for E-track systems (e75JR) Steel construction with yellow zinc plating is strong and rust resistant
Use this Snap-Loc self-tapping screw set to attach 2 Snap-Loc single-slot E-track tie-down anchors to a metal surface. Great for Snap-loc anchors that must be surface mounted. Made from zinc-plated steel.Features: Attaches 2 bolt-on Snap-Loc E-track tie-down anchors to a metal surface Works on most structural metal framing Includes 4 heavy-duty, zinc-plated steel screws Dimensions: 1-1/2" long x 5/16" diameter
These high-strength, zinc-plated steel wood screws are perfect for installing 2 Snap-Loc single-slot E-track tie-down anchors (sold separately) on a wooden structure. Great for utility trailer beds, enclosed trailer walls, or wooden sheds.Features: Attaches 2 bolt-on Snap-Loc E-track tie-down anchors to a wood surface Great for utility trailer beds, enclosed trailer walls, or wooden sheds Includes 4 heavy-duty, zinc-plated steel screws Dimensions: 3" long x 5/16" diameter
36" Long. This handy Etrack lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Features: Etrack provides tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall Mountinghardware not included Black powder coated steel is corrosion resistant Made in the USA Specs: Dimensions: 36" long x 4-7/8" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
... Hardware sold separately.Features: Single Etrack anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps and ring attachments and with any Etrack accessories (sold separately) Sturdy, 3.5-mm steel construction Black powder coat finish resists rust Made in the USA Specs: Dimensions: 5-3/4" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5" apart on center Mounting hole dimensions: 0.327" x 0.327" square Accepts 5/16" hardware Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
... Bolts on. Hardware sold separately.Features: Single Etrack anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps, ring attachments and any Etrack accessories (sold separately) 2.5-mm Stainless steel with matte finish stands up to harsh weather, road chemicals and marine use Made in the USA Specs: Dimensions: 5-3/4" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/8" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for boaters, movers, motorcyclists and towers, the Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies.
... Hardware sold separately.Features: Single Etrack anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps and ring attachments and with any Etrack accessories (sold separately) Sturdy, 3.5-mm steel construction Matte-zinc-finished surface resists rust Made in the USA Specs: Dimensions: 5-15/16" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/16" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
... Hardware sold separately.Features: Single Etrack anchor lets you add a tie-down point anywhere on your trailer or truck bed Bolt to the wall or floor of your trailer to add a traditional tie-down point Add to the ceiling for overhead storage of ladders or other long loads Low-profile design gives you more installation options and keeps the anchor out of your way when it's not in use Square mounting holes allow one-person installation when using Snap-Loc carriage bolt hardware (SLHCBDS-P - sold separately) Use upside down as a recessed tie-down point Works with Snap-Loc cargo straps, ring attachments and any Etrack accessories (sold separately) 3.5-mm Bare steel construction Unfinished surface can be painted to match your trailer or vehicle Made in the USA Specs: Dimensions: 5-15/16" long x 1" wide x 1/2" tall Maximum load (break strength): 3,000 lbs Safe working load limit (WLL): 1,000 lbs Spacing of mounting holes: 5-1/16" apart on center Mounting hole dimensions: 3/8" x 3/8" square Limited lifetime warranty Great for contractors, movers, motorcyclists and anyone who tows.
This wheel chock snaps into your floor-mountedEtrack or X track so you can stabilize your motorcycle on your trailer. Secure the wheel with a tie-down strap (sold separately). ... Features: Wheel chock helps to stabilize the front or rear wheel of your motorcycle Perfect for use on your utility trailer or in your enclosed trailer Rubber pad on base helps protect your trailer floor from scratches and scuffs Spring-loaded fittings snap into floor-mountedEtrack or X track anchor points Chock can be easily moved from one Etrack or X track slot to another Mounting holes let you permanently install chock on your trailer - hardware not included Tie-down strap (sold separately) lets you secure front wheel to chock Durable steel construction with black powder coat finish is corrosion resistant Specs: Application: tires up to 7" wide Distance between fittings: 12" Dimensions: 14-1/2" wide x 12" deep x 12" tall Weight: 6 lbs 1-Year limited warranty
Get multiple slots for securing Etrack accessories, straps, and anchors with this Etrack rail, and you'll have endless possibilities for organizing and securing your cargo. ... Features: Etrack provides multiple tie-down points for securing cargo in your trailer, truck, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall 12-Gauge carbon steel is heavy duty Gunmetal gray powder coat resists corrosion Easy bolt-on installation with multiple mounting holes Hardware not included Made in the USA Specs: Overall dimensions: 5' long x 5-1/8" wide x 1/2" thick Slot openings: 1" at widest point and 1/2" at narrowest Spacing between slots: 2" Spacing between mounting holes: 2" Notes: It is recommended that you use a backing plate (sold separately) every 12" for best results.
94" Long. This set of Etracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Features: Etracks provide tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etracks can be mounted on the floor or horizontally on a wall Mountinghardware not included Black powder coated steel is corrosion resistant Made in the USA Specs: Quantity: (4) 94" E-track sections Dimensions: 94" long x 4-15/16" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
94" Long. This set of Etracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Features: Etrack provides tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall Mountinghardware not included Galvanized steel is corrosion resistant Made in the USA Specs: Quantity: (4) 94" E-track sections Dimensions: 94" long x 4-15/16" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
60" Long. This handy Etrack lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Features: Etrack provides tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall Mountinghardware not included Black powder coated steel is corrosion resistant Made in the USA Specs: Dimensions: 60" long x 4-7/8" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
94" Long. This handy Etrack lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Features: Etrack provides tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall Mountinghardware not included Black powder coated steel is corrosion resistant Made in the USA Specs: Dimensions: 94" long x 4-15/16" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
94" Long. This handy Etrack lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates Etrack accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Features: Etrack provides tie-down points for securing cargo in your trailer, truck, van, or garage For use with Etrack straps, anchors, hooks, baskets, and other accessories (sold separately) Versatile Etrack can be mounted on the floor or horizontally on a wall Mountinghardware not included Galvanized steel is corrosion resistant Made in the USA Specs: Dimensions: 94" long x 4-15/16" wide x 1/2" tall Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 2" Limited lifetime warranty Notes: It is recommended that you use a backing plate (sold separately) for trailers with thin walls.
Filters
