This electric scissor jack lets you easily raise and lower your vehicle for emergency tire changes. It plugs into your vehicle's 12-volt accessory outlet for use while on the road, and it includes a hand-held remote with 12' cord.Features: Electric scissor jack lets you raise and lower your vehicle for emergency tire changes Designed for compact to medium sized vehicles Push-button remote lets you operate jack from up to 12' away Plugs into your vehicle's 12-volt accessory outlet Emergency hand crank lets you operate jack if no power is available from your vehicle's battery 3 Replacement 11-amp fuses included in case of blowout from overloaded circuit Compact carry case lets you easily store and transport jack and hand crank in your vehicle Specs: Weight capacity: Extended 14": 4,000 lbs Extended 10": 2,400 lbs Extended 8": 1,600 lbs Extended 6": 1,200 lbs Lift range: 4-3/8" - 13-3/8" Base dimensions: 7" long x 5" wide Rated current: 11 amps Output power: 75 watts Weight: 11 lbs 1-Year limited warranty
4" Tall x 185" long ramps make it easier to get your low-ground-clearance vehicle onto a scissor or 2-post lift. Ramp incline creates a 3.9-degree angle of approach. Fit tires up to 12" wide.Race Ramps Car Lift Service Ramps let you easily get your low-ground-clearance vehicle onto a scissor or 2-post lift for service. The ramps have a 3.9-degree angle of approach, which allows you to lift your vehicle without worrying about scraping its front end.
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.Features: Raises, lowers, and stabilizes unibody vehicles Great for cars, crossovers, and small SUVs and trucks Safety bar locks the jack into place Removing the need for jack stands Wide base provides more stability for lifting loads safely Meets ANSI standards Specs: Weight capacity: 3 tons Lift range: 11" - 21" 1-Year warranty Note: This jack is designed to lift and stabilize 3 tons and should not be used to lift over that weight.
Car hauler ramp set lets you load your vehicle into your trailer. Textured panels offer traction. Carry handles allow easy grab-and-go removal. ... The 2 separate ramps can be spaced the same distance as the wheel width of your vehicle, which makes them great for loading your car into your trailer. The sturdy yet lightweight aluminum construction and attached safety straps make this set of ramps easy and safe to use.
Quickly check circuits and wire function with this Performance Tool 6 to 12V tester. Designed for automotive electrical systems, it features an insulated piercing probe and an alligator-clip lead for secure, hands-free testing on 6V and 12V setups.
10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.Race Ramps 67" XT Car Service Ramps can be used to lift your vehicle with low-ground-clearance 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
These strong ramps have a treaded surface and include wheel chocks to ensure safe use. Durable construction. Works with tires up to 10" wide.Features to Know About Low-Incline Design Makes Driving On Simple Don't waste your energy cranking a jack. These Caliber ramps are versatile enough that you can raise either the front or backend of your vehicle to make undercarriage work easier.
8" Tall x 56" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 10" wide.Race Ramps 56" Car Service Ramps can be used to lift your vehicle with low-ground-clearance 8" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
3" Tall x 30" long ramps let you lift your low-ground-clearance vehicle to get a floor jack underneath it. Eliminates the need to buy a low-profile jack. Ramp incline creates a 7.8 degree angle of approach. Fit tires up to 10" wide.These ramps eliminate the need to purchase an expensive low-profile jack. Ultra-Strong, Lightweight Construction with Anti-Skid Coating These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce.
3" Tall x 30" long ramps let you lift your low-ground-clearance vehicle to get a floor jack underneath it. Integrated stoppers assist tire positioning. Ramp incline creates a 7.8 degree angle of approach. Fit tires up to 10" wide.These ramps eliminate the need to purchase an expensive low-profile jack. Ultra-Strong, Lightweight Construction with Anti-Skid Coating These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce.
4" Tall x 32-3/4" long ramps work in conjunction with 56" or 67" Race Ramps to provide clearance on opposite end of vehicle. They also allow standard floor jacks to fit under a low-profile vehicle. Fit tires up to 12" wide.Additionally, with 4" of lift, the Roll-Up ramps will allow most standard floor jacks to fit under your low-profile vehicle. The ramps have an 11.9 degree angle of approach, which allows you to lift a low-ground-clearance vehicle without worrying about scraping its front end.
10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. Fit tires up to 12" wide.Race Ramps 67" XT Car Service Ramps can be used to lift your vehicle with low-ground-clearance 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
7" Tall x 40" long ramps let you lift your vehicle for service or display. Designed for lowered, short-nose sports cars. Ramp incline creates a 16.7 degree angle of approach. Fit tires up to 8" wide.Race Ramps Sport Ramps can be used to lift your lowered, short-nose sports car 7" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
2-1/2" Tall x 30" long ramps let you lift your vehicle directly onto racing scales. Ramp incline creates a 7.8 degree angle of approach. Integrated 12-1/2" roll-off platform. Fit tires up to 10" wide.The ramps have a 7.8 degree angle of approach, which allow you to lift a low-ground-clearance vehicle onto a scale without worrying about scraping its front end. This eliminates the need for heavy jacks and cumbersome jackstands. These ramps also have an integrated 12-1/2" roll-off platform. Ultra-Strong, Lightweight Construction with Anti-Skid Coating These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce.
5" Tall x 30" long ramps let you lift your vehicle for service or display. Designed for small sports cars. Ramp incline creates a 16 degree angle of approach. Fit tires up to 8" wide.Race Ramps Rally Ramps can be used to lift your smaller sports car 5" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
10" Tall x 80" long combo ramps can be used to lift your vehicle for service, load it onto a trailer, or display it at a show. The 8.5 degree angle of approach is perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. When loading your car onto a trailer, the ramps can support a vehicle weighing up to 6,000 lbs because they are only ever supporting half of the vehicle at one time.
10" Tall x 67" long heavy-duty ramps let you lift your vehicle for service or display. 5,000 lbs capacity for heavier vehicles. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.Race Ramps 67" Heavy-Duty XT Car Service Ramps can be used to lift your heavier vehicle with low-ground-clearance 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid.
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jack stands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jack stands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jack stands with 10 lock-safe settings Jack stand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jack stand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Replaces the right jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
Replaces the left jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Replaces the jack leg for your Bigfoot 8K hydraulic jacks.Features: Replaces the jack leg for your Bigfoot 8K hydraulic jacks Works with all 8K square leg Bigfoot hydraulic jacks Includes jack leg and foot Cylinder and pump not included Made in the USA
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 18-3/8" Lift range with 2 ton capacity.Features: Raises, lowers, and stabilizes unibody vehicles Great for cars, crossovers, and small SUVs and trucks Safety bar locks the jack into place Removing the need for jack stands Wide base and wheels provide more stability for lifting loads safely Meets ANSI standards Specs: Weight capacity: 2 tons Base dimensions: 6-1/2" wide x 7-1/2" long Lift range: 8-5/8" - 18-3/8" 1-Year warranty Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight.
Filters
