Dutton-Lainson roller bunkbracket for boat trailers.Features: Roller bunkbracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Boat Trailer Roller BunkBracket for Dutton-Lainson Roller BunksFeatures: Roller bunkbracket, for mounting galvanized Roller Bunks models Fits: DL21740 (model #6387) and DL21741 (model #6388) Sold individually 4 Needed to mount a pair of roller bunks Die-formed of heavy gauge steel plate TUFFPLATE finish Measurement between slotted holes from center to center: 1-1/4" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 4 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 8" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames Ensures alignment of the bunk board mounting holes Requires (2) 1/2" diameter U-bolts (sold separately) for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Overall dimensions: 85-Degree bracket dimensions: 6" tall x 5" wide 95-Degree bracket dimensions: 7" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/16" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical BunkBrackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 6" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical BunkBrackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
... Use 2 brackets for each board.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Allows your trailer's bunk board to pivot while you load your boat Stabilizes your bunk when 2 brackets are used (additional bracket sold separately) Slotted mounting hole lets you adjust the height during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Dimensions: 2" wide x 11-3/4" tall x 1-1/2" thick
Rust-resistant assemblies let you install 2 roller bunks on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allows you to install 2 roller bunks on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs on your boat trailer's frame with a single U-bolt (sold separately) Strong swivel brackets let you tilt the roller bunks Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 1-1/4" long x 1-3/4" wide x 2" tall Top flange mounting hole diameter: 7/16" Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Made for the Ramp: Hot-dip galvanized steel holds up to spray, rain, and road grit. Non-Slip Stability: Dimples help lock the bunk in place, boost load capacity and keep your boat steady when loading. Features to know about Adjustable Boat Trailer BunkBracket for Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull.
Durable, aluminum replacement bracket works with another 90-degree bracket (sold separately) to stabilize 1 end of an extra-large bunk board on your boat trailer. Installs on level trailer frames with a U-bolt (sold separately).Features: Replaces 1 damaged CE Smith 90-degree, vertical bunkbracket on your trailer Stabilizes 1 end of the bunk board when used with additional bracket (sold separately) Requires 1/2" diameter U-bolt (sold separately) for installation Constructed of rustproof, corrosion-resistant aluminum Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Dimensions: 10" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Features to know about Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull. Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth.
... This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.Fixed bunks can fight the boat and leave rub marks in the same spots. This compact swivel bracket lets you adjust your bunk boards so they sit flush to your hull.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Features to know about Centered, Scuff-Free Loading Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Made for the Ramp: Hot-dip galvanized finish protects against road grit, spray, rain, and saltwater, to help prevent rust. Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical BunkBrackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 12-5/8" Mounting slot dimensions: 9-1/8" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunkbrackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunkbrackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Mounting slot allows for height adjustment. Dimpled surface keeps bracket from sliding along the trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunkbrackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.Straightforward Install: Slotted brackets make placement simple for a tidy, reliable setup. Features to know about Pontoon BunkBrackets for Even, Scuff-Free Support Your pontoon will ride at its best when your bunks carry the tubes evenly.
Durable, aluminum replacement bracket works with another 90-degree bracket (sold separately) to stabilize 1 end of an extra-large bunk board on your boat trailer. Installs on level trailer frames with a U-bolt (sold separately).Features: Replaces 1 damaged CE Smith 90-degree, vertical bunkbracket on your trailer Stabilizes 1 end of the bunk board when used with additional bracket (sold separately) Requires 1/2" diameter U-bolt (sold separately) for installation Constructed of rustproof, corrosion-resistant aluminum Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Dimensions: 8" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Mounting slot allows for height adjustment. Dimpled surface helps keep bracket from sliding along trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boat trailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 4-3/8" of height adjustment during installation Bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 7-1/2" Inside width: 1-3/4" Mounting slot dimensions: 4-3/8" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boat trailer's crossmembers, vertical bunkbrackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Filters
