Upgrade your trailer's actuator to meet the high demands of your disc brakes. Plug-and-play system combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for faster stops.Features: Activates your trailer's hydraulic disc brakes when you apply the brakes in your tow vehicle Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller Quick, easy connecting every time with plug-and-play design - no hardwiring required Integrated, weather-sealed connectors make installation a snap Additional plugs connect to vehicle battery and breakaway switch Delivers excellent response time Mounts upright so that motor pushes brake fluid down instead of sideways Reduces heat build-up and prevents fluid from spilling or leaking Vented - air gap between fluid resevoir and the pump and motor Resists weather with durable, plastic housing Kit comes with BrakeRite, wiring harness, breakaway switch, and breakaway battery harness included (battery sold separately) DOT compliant Specs: Application: disc brakes Compatible with drum brakes when used with reducer (T4844100 - sold separately) Maximum output pressure: 1,500 psi Response time: Reaches 200 psi in 0.3 seconds Reaches 1,350 psi in 1.1 seconds Actuator's overall dimensions: 6" long x 7-1/4" wide x 9-1/8" tall Mounting hole dimensions: Set of 4 on bottom: 1/4"-20 UNC x 5/8" deep Set of 3 on back: 5/16"-18 UNC x 5/8" deep 2-Year warranty on BrakeRite unit Notes: Dexter's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Upgrade your trailer's actuator to meet the high demands of your disc brakes. Designed to ensure faster stops. Works great for retrofits because it ties into your trailer's junction box (sold separately).
Use this trailer breakaway kit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Provides enough power to meet or exceed the 10-amp requirement of the BrakeRite EHB and BrakeRite II Maintenance-free gel cell batteries can be used in nearly any position without leaking Tolerates heat better than other types of batteries Mounts to the inside of your trailer frame or camper compartment Top-loading cases provide easy battery access Switch installs with self-tapping screws (sold separately) Protects batteries from rain and debris with durable, plastic cases Includes 2 batteries, 2 battery boxes, and a breakaway switch Department of Transportation (DOT) compliant Specs: Application: trailers with BrakeRite EHB or BrakeRite II system Battery: Voltage: 12V Type: sealed gel cell Capacity: 10 amp-hours Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 48" Battery box dimensions: 6" long x 3-1/2 wide x 5-7/8" tall Battery box mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Get the best in brake actuator technology with the BrakeRite EHB. Use your brake controller in conjunction with a hydraulic actuator for better, more controlled stopping.Features: Electric-over-hydraulic brake actuator mounts on trailer and hardwires into trailer wiring system Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied Signal triggers pump and motor on actuator, activating trailer brakes Pump-and-motor-based system increases response time compared with traditional hydraulic actuators Trailer brakes are triggered when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball Electronic, proportional pressure valve ensures that braking is smooth and effective Controls braking pressure during long-term braking Fluid reservoir is isolated and has diaphragm-type filler cap to prevent spills and leakage Specs: Application: hydraulic drum brakes Hydraulic pressure: 1,000 psi Vehicle must be wired with an in-cab electric brake controller (sold separately) 1-Year warranty With a faster response time and more proportional braking than traditional, surge-type actuators, the BrakeRite is perfect for nearly any towing application from light to heavy duty. The system works with most in-cab brake controllers to sense when and how you apply the brakes in the tow vehicle.
This adapter module allows you to control your Dexter Axle BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic brake actuator with your factory Ford, GMC, or Chevy brake controller.Features: Lets you control your Dexter Axle BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic actuator with your factory Ford, GMC, or Chevy brake controller Intercepts verification signals to prevent false error codes Can be mounted anywhere and splices into your BrakeRite actuator's wiring Butt connectors included Made in the USA
This plug and play pump replaces the electric-over-hydraulic brake actuator and Severe Duty control module for your Dexter BrakeRite II SD. The 3 plugs allow you to connect your battery cable, breakaway switch, and harness directly to the pump.Features: Plug and play pump replaces the electric-over-hydraulic brake actuator and Severe Duty control module for your Dexter BrakeRite II Severe Duty (K68-002-00) Internal control board eliminates the need for a separate SD control module 3 Plugs allow you to connect your battery cable, breakaway switch, and wiring harness directly to the pump 7-Way trailer connector (sold separately) is needed to transmit signal from brake controller Resists weather with durable, plastic housing Wiring harness (T4834300) sold separately DOT compliant Specs: Application: disc brakes Compatible with drum brakes when used with reducer (T4844100 - sold separately) Maximum output pressure: 1,500 psi Response time: Reaches 200 psi in 0.3 seconds Reaches 1,350 psi in 1.1 seconds Overall dimensions: 6" long x 7-1/4" wide x 9-1/8" tall Mounting hole dimensions: Set of 4 on bottom: 1/4"-20 UNC x 5/8" deep Set of 3 on back: 5/16"-18 UNC x 5/8" deep 2-Year warranty Notes: Dexter's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Use Titan's BrakeRite II SD (Severe-Duty) actuating system with your factory Ford (model years 2006.5 - 2012) or Chevy (model years 2006.5 - 2015) brake controller by installing this convenient adapter.Features: Lets you use BrakeRite actuating system with Ford and Chevy integral, in-cab brake controllers Plugs easily into BrakeRite II SD actuator (T4835700) for no-hassle installation Does not interfere with use of other brake controllers Factory-installed, in-cab brake controllers on 2006.5 - 2012 Ford and 2006.5 - 2015 Chevy trucks and SUVs are designed for use with electric trailer brakes.
This replacement, diaphragm-style master cylinder cap fits Dexter BrakeRite trailer brake actuators.Features: Replaces cap on master cylinder of your Dexter BrakeRite brake actuator Measures 1.54" tall Threaded diameter: 1-5/8"
Easily and securely mount your BrakeRite actuator box to your trailer with this angled bracket.Features: Sturdy bracket provides mounting point for BrakeRite actuator Metal plate has pre-drilled holes that correspond to those in actuator for quick, easy mounting Angled design lets you position actuator close to control module Mount bottom of BrakeRite to bottom of plate and attach upright side of bracket anywhere on the trailer frame
Replaces the breakaway switch on your Dexter BrakeRite I electric-over-hydraulic actuator (T4813100 or T4822500). Includes 1 breakaway switch.Features: Replaces the breakaway switch on your Dexter BrakeRite I electric-over-hydraulic actuator (T4813100 or T4822500) Quantity: 1 breakaway switch
Replacement wiring harness is designed for use with your Dexter BrakeRite II Severe-Duty trailer brake actuator. Fits 7-way, blade-style trailer connectors.Features: Wiring harness fits Dexter BrakeRite SD electric-over-hydraulic brake actuators Integrated 3-way connector easily plugs into BrakeRite control module (sold separately) 7-Way trailer-end and vehicle-end connectors included Durable plugs are weather sealed Wire length: 8'
Reduce the hydraulic pressure in your BrakeRite actuator so that it can be used with your trailer's drum brakes.Features: Lets you use BrakeRite actuating system on trailers with drum brakes Plugs easily into BrakeRite I Plug and Play, BrakeRite II SD, or BrakeRite II RF actuator for no-hassle installation Reduces hydraulic pressure to 900 psi - perfect for drum brake applications
Replacement wiring harness is for use with Titan BrakeRite II RF electric-over-hydraulic trailer brake actuators.Features: Replaces wiring harness in Titan BrakeRite II RF brake actuators Connects trailer to tow vehicle and plugs into actuator
Battery harness is for use with Dexter BrakeRite II RF and SD electric-over-hydraulic trailer brake actuators. 32" Long harness allows you to use actuator with tandem battery setups.Features: Battery harness connects tandem batteries to breakaway switch for Dexter BrakeRite II RF and Severe Duty brake actuators Length: 32"
Replacement breakaway switch is for use with Dexter BrakeRite II RF and SD electric-over-hydraulic trailer brake actuators.Features: Replaces breakaway switch in Dexter BrakeRite II RF and Severe Duty brake actuators Required for most heavy-duty trailers
Replacement wiring harness is designed for use with your Dexter BrakeRite II Severe-Duty trailer brake actuator. Fits 4-way flat trailer connectors.Features: Wiring harness fits Dexter BrakeRite SD electric-over-hydraulic brake actuators Integrated 3-way connector easily plugs into BrakeRite control module (sold separately) 4-Way flat trailer-end and vehicle-end connectors included Durable plugs are weather sealed Wire length: 8'
Mount your BrakeRite actuator box to your trailer frame with this sturdy, pre-drilled, metal plate.Features: Sturdy plate provides mounting point for BrakeRite actuator Metal plate has pre-drilled holes that correspond to those in actuator for quick, easy mounting Dimensions: 6-1/8" long x 4" wide
Replacement battery harness is for use with Dexter BrakeRite II RF and SD electric-over-hydraulic trailer brake actuators.Features: Replaces battery harness in Dexter BrakeRite II RF and Severe Duty brake actuators Connects breakaway switch to battery
Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100). Includes 1 battery box.Features: Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100) Includes 1 battery box Specs: Outside dimensions: 6" long x 3-1/2" wide x 5-7/8" tall Mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Inside dimensions: 5-1/16" deep x 5-5/8" long x 3-1/16" wide
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.
With a huge reservoir that holds a full quart of fluid, this actuator is perfect your big, multi-axle camper. Just wire it into your trailer and use your existing brake controller to activate your hydraulic drum brakes. Lines sold separately.
Filters
