Keep your motorhome's interior off limits with a durable entry door lock. 2 Lock cores allow you to operate the latch handle and deadbolt separately. Can be keyed alike to match other Bauer RV locks.
Easily manage RV or camper docking needs for your water and AV setup when you arrive on site. Control your water system for filling, sanitizing, and winterizing with simple diverter valves. Match up your current Nautilus with this direct replacement.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.
Install this multi-purpose hatch on your RV's exterior to create an access point. The open back hatch consists of a mounting flange (no collar), and door. Plastic thumb turn lock can be replaced with a keyed-alike lock cylinder.
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height.
Throw this storage cover over your pop-up camper to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the corners of your camper and secures with integrated straps so it won't flap in the wind.
You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.
Throw this storage cover over your pop-up camper to protect it from mild sun while you're storing it in the south. Cover wraps around the bottom corners of your popup and secures with the integrated straps so it won't flap in the wind.
Throw this storage cover over your pop-up camper to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the corners of your popup and secures with integrated straps so it won't flap in the wind.
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizer jacks. Stack the pads to get 12-3/8" of height.
You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.
Keep your pop-up camper protected with this cover's thick ProTop4 roof fabric that sheds water, snow, and dirt. SoftGuard protectors shield sharp edges, and built-in vents and adjustable straps help keep your motorhome dry and secure.
You're checking the base of the slide-out after a long weekend and notice the left-hand trim cap is gone. The open end's collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.
Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.
You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.
Quickly and easily connect your RV or camper water and AV needs when you arrive on site. Control your water system for filling, sanitizing, and winterizing with simple diverter valves. Match up your current Nautilus with this direct replacement.
Replaces the universal striker plate for you Bauer RV door lock without pins. Works with BP-12 locks without pins. If your lock is for a compartment where passengers would be riding, the BA88HR striker plate is the correct plate.
Replaces the striker plate needed for your Bauer RV door compartment lock with pins. Works with BP-12 and EM locks. Required for all doors where a passenger would be riding in the unit.
Waterproof side camera can be mounted on the driver's or passenger's side of your RV to upgrade your backup camera system. Night vision and 120-degree viewing angle minimize blind spots while driving, changing lanes, or backing up.
Replaces a diverter valve plumbing assembly on your B&B water control panel. Works with diverter system on all water centers from B&B. Consists of a diverter T-fitting and 1/2" MPT fittings.
Replaces a T-connector plumbing fitting used with any B&B RV Nautilus water control panel manifold. Works onThe plumbing manifold is located behind your panel, and is assembled with various 1/2" MPT fittings and diverter valves.
Replaces a single 2-way diverter valve plumbing assembly on your B&B RV Nautilus water control panel. Works with diverter system on Nautilus P1 and P3 panels. Consists of a diverter T-fitting and 1/2" MPT fittings set for P1/P3 units.
Replaces a 90-Degree elbow plumbing fitting used with any B&B RV Nautilus water control panel manifold. The plumbing manifold is located behind your panel, and is assembled with various 1/2" MPT fittings and diverter valves.
Filters
