Video Transcript for B and B RV Multi-Purpose Hatch Spec Review

Hello, neighbors, Steve here with etrailer.com. Today, we're looking at our B&B RV Multi-Purpose Hatch with a thumb lock in black color. So, folks, this molded plastic hatch will give you an exterior access to your RV's needs. It's a thumb lock, you simply twist to open or unlock it, and twist to lock it. So once again, you got a little thumb lock here. You can simply twist that to lock it, and then twist it the other way to open it.

It comes with that plastic thumb lock. You could replace it with a metal lock core and key. That's sold separately if you want. You can see the plastic latch there, you can replace that with metal if you want. It is gonna secure to the exterior wall with the supplied screws.

You can see they're painted black on the face already to match. You're also gonna get a roll of butyl tape, that's this stuff right here. If you've never seen or heard of butyl tape, it's like a putty consistency, it's squishy, it's kinda sticky. Basically, you'll cut out, if you don't already have a cutout, the size of this, which is 11 inches long, six inches wide or deep, however you wanna say it. You'll push this in place after you put butyl tape all the way around it.

And then from this side, you'll simply put all the install screws through all the screw holes, and that's gonna go through that butyl tape and make a watertight, weathertight seal. It has been NSF, CSA, and TEI certified. Made here in the US. As far as some overall outside dimensions, were getting 12 5/8 overall on the length, 7 3/4 inches that way, and 1 1/2 inches deep, not counting the little thumb screw which sticks out just a little bit. You can kinda see it sticks out.

So again, I was getting 1 1/2 deep without the thumb screw. So very nice hatch flange. And again, this is from B&B Molders, the RV Multi-Purpose Hatch with thumb lock. I'm Steven, have a good one.