No more trying to balance on narrow trailer-frame beams to get at your boat. Attach this sturdy, clamp-on step to your trailer's tongue or frame and you'll be able to access your boat quickly and easily.Features: Unique step makes it easy to prep your boat for trailering Bracket mounts directly to trailer tongue or frame Clamps around frame with included hardware Adjusts to fit different-size beams Non-skid step surface Durable steel construction Powder coat finish resists rust Specs: Application: up to 3" x 5" trailer frame or tongue Step dimensions: 5" wide x 9" long Capacity: 400 lbs 1-Year limited warranty 4036 Heininger Holdings Hitch Mate BoatTrailer Frame Step
You were ready to launch, but the roller locked up. This shaft steps in when rust, bends, or wear bring things to a stop. It restores the spin, the glide, and the confidence to get back on the water like nothing ever went wrong.Standard Size: Fits most keel and spool rollers and works with common trailer brackets. Zinc-Plated Steel: Resists rust from freshwater and light saltwater exposure. Reliable Build: Made in the USA with marine use in mind.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.The slotted holes give you room to position the bunks where your boat needs them, helping the tubes sit square and lowering the chance of rub marks. The wide 6-3/16" base spreads the load across your bunk board, adding stability for rough hauls and long trips.
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.The slotted holes give you room to position the bunks where your boat needs them, helping the tubes sit square and lowering the chance of rub marks. Run 2x4 boards for a standard setup, or move to 2x6 if you want more surface contact.
4-1/4" long x 1-3/4" wide x 1-1/4" thick. Compact LED light illuminates the area at the base of steps or ramps. Durable polycarbonate housing. Surface mount. 2-Wire design. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Durable polycarbonate housing and clear lens with polished chrome finish Surface mount to trailer - hardware not included Included gasket creates a weathertight seal 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4-1/4" long x 1-3/4" wide x 1-1/4" thick Distance between mounting holes (center on center): 3-2/3" Voltage: 12/24V DC Diodes: 10 Power draw at 12.8V: 0.107 amps Input voltage: 8V-30V Lifetime warranty on LEDs
4" x 2-1/2" x 1-5/16". Compact LED light illuminates the area at the base of steps or ramps. Durable aluminum hosuing. Surface mount. 2-Wire design. ADA compliant. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Clear lens with white LEDs Die-cast aluminum housing is rustproof White coating protects against corrosion and damage caused by UV rays Surface mount to trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4" tall x 2-1/2" wide x 1-5/16" deep Distance between mounting holes (center on center): 2-15/16" Voltage: 12/24V DC Diodes: 5 Power draw at 12.8V: 0.25 amps Lifetime warranty on LEDs
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 16' - 20' long and sailboats 20' - 28' long Overall height: 15"
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 20' - 28' long
Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water. ... Features: Self-aligning boat loading system ensures that you are able to safely and easily guide your boat to the center of your trailer despite strong winds, current, or rough water Ezi-Guides help you avoid loading your boat off the rollers and damaging it U-bolt mounting system eliminates the need for power tools and drilling Slotted mounting bracket fits 1.96" - 2.57" cross beams Dacromet finish resists rust Works for power boats 14' - 16' long and sailboats 16' - 20' long
Bolt-on swivel trailer jack with 1,000 lb lift capacity and 10" travel. Includes 6" caster wheel for easy maneuvering and a sidewind handle for controlled lifting and lowering.Features: Bolt-on swivel trailer jack with caster wheel 6" diameter caster swivels 360° for maneuverability Sidewind crank handle with 7" radius Swivel design allows jack to pivot up for travel and down for use Clamp-style mounting bracket fits 2" to 4" tall trailer frames Includes mounting hardware for installation Clear zinc finish for corrosion resistance 10" screw travel for height adjustment Specs: Lift capacity: 1,000 lbs Bracket height (retracted): 13-1/2" Bracket height (extended): 23-1/2" Screw travel: 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" x 2" Handle radius: 7" Trailer frame height: 2" to 4" Warranty: 1-Year warranty
Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence and tracks straight on long hauls. Durable powder-coated wheel resists rust, and the low-profile tire design helps boost fuel efficiency.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Heavier Trailer Loads: 2,200 lb Capacity at 65 psi If you are hauling equipment, loaded utility trailers, or heavier gear, this setup steps things up.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and radial tire design cuts heat buildup for longer tread life.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Heavier Trailer Loads: 2,200 lb Capacity at 75 psi If you are hauling equipment, loaded utility trailers, or heavier gear, this setup steps things up.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and radial tire design cuts heat buildup for longer tread life.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,925 lb Capacity at 60 psi For utility trailers, small cargo trailers, or weekend hauling, this setup gives you dependable support.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. The aluminum wheel resists corrosion, and the low-profile tire design helps boost fuel efficiency.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,375 lb Capacity at 50 psi For small trailers carrying gear, tools, or weekend loads, this setup gives you the support you need.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. The aluminum wheel resists corrosion, and the low-profile tire design helps boost fuel efficiency.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,709 lb Capacity at 65 psi For small trailers carrying gear, tools, or weekend loads, this setup gives you added support in the same tire size.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and radial tire design cuts heat buildup for longer tread life.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Heavier Everyday Loads: 1,650 lb Capacity at 70 psi If you are carrying more gear or putting your trailer to work more often, this setup gives you added capacity without changing size.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and the low-profile tire design helps boost fuel efficiency.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,360 lb Capacity at 50 psi For smaller trailers carrying tools, gear, or weekend loads, this setup gives you the support you need.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. The aluminum wheel resists corrosion, and the low-profile tire design helps boost fuel efficiency.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,477 lb Capacity at 50 psi For small trailers carrying gear, tools, or weekend loads, this setup gives you the support you need.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and radial tire design cuts heat buildup for longer tread life.Features to know about A Ready-to-Roll Setup: Pre-Mounted Tire and Wheel Combo This combo comes mounted and ready to install, so you can skip the extra steps. Whether you are replacing a worn setup or getting a trailer ready to go, it saves time and gets you back on the road faster. Handle Everyday Trailer Loads: 1,375 lb Capacity at 50 psi For small trailers carrying gear, tools, or weekend loads, this setup gives you the support you need.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Offers twice the stability of single-wheel jacks Wheelbase turns a full 360 degrees Swings up and down smoothly J-bolt handle lets you position jack quickly Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Screw travel : 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boattrailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 13-1/2" Extended: 23-1/2" Screw travel : 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" diameter x 2" wide Handle radius: 7" 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boattrailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,200 lbs Bracket height: Retracted: 12-1/2" Extended: 23-1/2" Screw travel : 11" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Handle radius: 6-5/8" Wheel dimensions: 5-3/4" diameter x 2" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Easily raise or lower your boattrailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Filters
