4-1/4" long x 1-3/4" wide x 1-1/4" thick. Compact LED light illuminates the area at the base of steps or ramps. Durable polycarbonate housing. Surface mount. 2-Wire design. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Durable polycarbonate housing and clear lens with polished chrome finish Surface mount to trailer - hardware not included Included gasket creates a weathertight seal 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4-1/4" long x 1-3/4" wide x 1-1/4" thick Distance between mounting holes (center on center): 3-2/3" Voltage: 12/24V DC Diodes: 10 Power draw at 12.8V: 0.107 amps Input voltage: 8V-30V Lifetime warranty on LEDs
4" x 2-1/2" x 1-5/16". Compact LED light illuminates the area at the base of steps or ramps. Durable aluminum hosuing. Surface mount. 2-Wire design. ADA compliant. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Clear lens with white LEDs Die-cast aluminum housing is rustproof White coating protects against corrosion and damage caused by UV rays Surface mount to trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4" tall x 2-1/2" wide x 1-5/16" deep Distance between mounting holes (center on center): 2-15/16" Voltage: 12/24V DC Diodes: 5 Power draw at 12.8V: 0.25 amps Lifetime warranty on LEDs
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
Replace your old trailer fender with this corrosion-proof, impact- and heat-resistant plastic fender. Black, molded-in color won't show scratches. Built-in side steps.
... These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.Features: Round fenders cover 2 tires on your single-axle trailer Act as splash guards to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps per fender - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirts provide extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fenders attach to your trailer's existing brackets - requires drilling Mounting hardware sold separately Made in the USA Specs: Application: single-axle trailers with 14" diameter wheels Dimensions: 43-1/8" long x 11" wide x 12-1/2" tall Skirt height: 11-1/2" Step dimensions: Side steps: 6-1/2" long x 10-1/2" wide Top step: 6-1/2" long x 9" wide Weight capacity: 300 lbs per fender Weight: 5.75 lbs per fender Quantity: 2 fenders Durable Polypropylene Construction Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders.
... These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.Features: Round fenders cover 2 tires on your single-axle trailer Act as splash guards to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps per fender - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirts provide extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fenders attach to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 13" diameter wheels Dimensions: 40-1/4" long x 10" wide x 11-1/4" tall Skirt height: 10-3/8" Step dimensions: Side steps: 6" long x 9-1/2" wide Top step: 6" long x 8" wide Weight capacity: 300 lbs per fender Weight: 4.36 lbs per fender Quantity: 2 fenders Durable Polypropylene Construction Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders.
... This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirt provides extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fender attaches to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 14" diameter wheels Dimensions: 43-1/8" long x 11" wide x 12-1/2" tall Skirt height: 11-1/2" Step dimensions: Side steps: 6-1/2" long x 10-1/2" wide Top step: 6-1/2" long x 9" wide Weight capacity: 300 lbs Weight: 5.75 lbs Quantity: 1 fender Note: If ordering more than one fender, order part CE19504-2 to save on shipping costs.
... This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirt provides extra protection Durable polypropylene is corrosion-proof Black color is molded into the plastic so it won't scratch or wear off Bolt-on installation Fender attaches to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 13" diameter wheels Dimensions: 40-1/4" long x 10" wide x 11-1/4" tall Skirt height: 10-3/8" Step dimensions: Side steps: 6" long x 9-1/2" wide Top step: 6" long x 8" wide Weight capacity: 300 lbs Weight: 4.36 lbs Quantity: 1 fender Note: If ordering more than one fender, order part CE19503-2 to save on shipping costs.
... These fenders are made of durable, corrosion-proof, impact-resistant gray polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.Features: Round fenders cover 2 tires on your single-axle trailer Act as splash guards to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps per fender - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirts provide extra protection Durable polypropylene is corrosion-proof Gray color is molded into the plastic so it won't scratch or wear off Bolt-on installation - mounting hardware is not included Fenders attach to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 12" diameter wheels Dimensions: 37-3/8" long x 8-7/8" wide x 9-1/2" tall Skirt height: 7-1/4" Step dimensions: Side steps: 6" long x 8-5/16" wide Top step: 5-1/2" long x 6-1/2" wide Weight capacity: 300 lbs per fender Weight: 4 lbs per fender Quantity: 2 fenders Durable Polypropylene Construction Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders.
... This fender is made of durable, corrosion-proof, impact-resistant gray polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.Features: Round fender covers 1 tire on your single-axle trailer Acts as a splash guard to keep road debris from hitting other vehicles and to help protect your trailer's cargo 3 Steps - 2 on each side and 1 on top - let you easily climb into and out of your trailer Molded-in treads offer secure footing Built-in skirt provides extra protection Durable polypropylene is corrosion-proof Gray color is molded into the plastic so it won't scratch or wear off Bolt-on installation - mounting hardware not included Fender attaches to your trailer's existing brackets - requires drilling Made in the USA Specs: Application: single-axle trailers with 12" diameter wheels Dimensions: 37-3/8" long x 8-7/8" wide x 9-1/2" tall Skirt height: 7-1/4" Step dimensions: Side steps: 6" long x 8-5/16" wide Top step: 5-1/2" long x 6-1/2" wide Weight capacity: 300 lbs Weight: 4 lbs Quantity: 1 fender Note: If ordering more than one fender, order part CE19502-2 to save on shipping costs.
... This corrosion- and impact-resistant plastic fender is perfect for single-axle trailers, particularly marine applications. The fender fits 13-15" tires and includes three separate steps.Features: Designed for single-axle trailers Works great for marine applications Constructed of white plastic Corrosion and impact resistant Provides 3 convenient steps - front, rear and top Requires 2 installation brackets (PF1135-BKT-2; sold separately) Made in the USA Specs: Application: 13" to 15" tires on single-axle trailers Weight capacity: 200 lbs Dimensions: 11-5/16" wide x 45" long x 13" tall Fender is 32-3/4" long, less the end steps Qty: 1 fender Step dimension: 6" wide
... Black, molded-in color won't show scratches. Built-in top and side steps.Features: Provides 3 steps - top, front, and rear Resists corrosion and impacts - made of high-density polyethylene material Built-in fender skirt Scratches will be hard to see thanks to the molded-in black color Includes mounting slots for easy installation Made in the USA Specs: Application: single-axle trailers with 12" diameter wheels Dimensions: 7-1/2" wide x 33-1/2" long x 6-3/4" tall
1-1/2" Diameter round. Waterproof, incandescent trailer light with illuminates your trailer's license plate. Durable chrome-plated steel housing. Snap-in design secures into 1-1/4" diameter cutout. 1-Wire design. (1) 168 bulb.Features: Compact light illuminates your trailer's license plate Requires a 2nd light (sold separately) for DOT approved license illumination Also works as a compartment, courtesy, or general illumination utility light Sealed, weatherproof housing and lens unit Durable steel housing with chrome-plated finish Clear lens over incandescent bulb Compatible with 12V DC systems Snap-in installation Requires a 1-1/4" diameter cutout Single wire design grounds through mounting hardware Specs: Dimensions: 1-1/2" diameter x 2-1/8" long Bulb type: 168 Power draw at 12V: 0.35 amps Wire length: 5-1/2" 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 60101 Truck Lite # 26391C and 26393C Optronics # LP11CB Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Tow hook perfect for vehicle recovery and straight-line pull applications. Non-skid step provides easy truck bed access.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball up or down along shank and secure in place with included pins and clips 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 1" increments Tow hook is perfect for vehicle recovery and straight-line pull applications Non-skid step provides easy truck bed access Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and zinc coating on balls resists corrosion Pins and clips attach ball mount to shank Receiver hitch pin or lock sold seperately Specs: Fits: 2" x 2" trailer hitch receivers Overall capacity: 14,000 lbs 2" Ball capacity: 10,000 lbs 2-5/16" Ball capacity: 14,000 lbs Straight pull capacity: 10,000 lbs Overall tongue weight capacity: 1,400 lbs Rise: 5-1/4" Drop: 6" Distance between vertical adjustment holes: 1" Pin hole diameter: 5/8" Limited lifetime warranty
Every time you pull up to load bikes or gear for a weekend ride, your vehicle feels ready for the day. This hitch gives you the confidence to tow what you need without pause, so plans stay simple and momentum stays intact.Class III Towing: Supports everyday towing needs with up to 6,000 lb gross trailer weight. 2" Receiver Tube: Standard size works with a wide range of hitch-mounted accessories. Integrated Step: Hitch step lets you easily access your cargo area or roof rack. Powder Coat Protection: Textured black finish resists rust and corrosion.
9/16" Diameter step bolt has a 7/16" thread diameter and is used to mount a double-eye spring inside a front or rear hanger on your trailer's leaf spring suspension. ... Features: Suspension bolt attaches leaf spring to front or rear hanger Works with locknut (sold separately) Specs: Bolt length: 3" Long under the head 2-5/16" Usable Diameter: 9/16" Thread size: 7/16"-20 Head diameter: 13/16" Grade 5 Quantity: 1 step bolt
Every time you pull up to load bikes or gear for a weekend ride, your vehicle feels ready for the day. This hitch gives you the confidence to tow what you need without pause, so plans stay simple and momentum stays intact.Class III Towing: Supports everyday towing needs with up to 6,000 lb gross trailer weight. 2" Receiver Tube: Standard size works with a wide range of hitch-mounted accessories. Integrated Step: Hitch step lets you easily access your cargo area or roof rack. Powder Coat Protection: Textured black finish resists rust and corrosion.
Every time you pull up to load bikes or gear for a weekend ride, your vehicle feels ready for the day. This hitch gives you the confidence to tow what you need without pause, so plans stay simple and momentum stays intact.Class III Towing: Supports everyday towing needs with up to 5,000 lb gross trailer weight. 2" Receiver Tube: Standard size works with a wide range of hitch-mounted accessories. Integrated Step: Hitch step lets you easily access your cargo area or roof rack. Powder Coat Protection: Textured black finish resists rust and corrosion.
Shackle bolt helps secure your leaf spring to either a suspension hanger or an equalizer. Threaded portion of bolt is 7/16"-20. Built-in grease zerk allows for easy lubrication. Silver phosphate coating resists corrosion. Nut sold separately.
... Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.Features: Oval LED trailer tail light serves 4 functions Turn signal, tail light. and brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet Mounts in any 360-degree position Industry-standard AMP-style plug DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.19 amps Tail: 0.02 amps Reverse: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
... Integrated voltage regulation. Recessed mount with included grommet and AMP-style plug.Features: Round LED trailer tail light serves 4 functions Turn signal, tail light. and Brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet Industry-standard AMP-style plug DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 4-1/4" diameter x 1-3/8" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.18 amps Tail: 0.02 amps Reverse: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Once you've plugged in the T-connector, insert the included 10-amp fuse into the integrated fuse holder. Then install the 30-amp cartridge fuse and two 7.5-amp mini fuses in the rear fuse panel. Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Features: Provides a 7-way, RV-style trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 4-pole, 5-pole, and 6-pole (sold separately) Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Connects quickly and easily - no cutting or splicing of wires Locate connection point behind center of rear bumper Plug in T-connector Comes with protective cover for 7-way connector Specs: Maximum amperage: Stop/turn lights: 10 amps per circuit Tail lights: 10 amps per circuit Backup/reverse lights: 10 amps per circuit Power circuit: 30 amps per circuit Trailer brakes: 20 amps per circuit 1-Year limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the center of your rear bumper.
Filters
