This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Colorcodedwires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 40' Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002295
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Colorcodedwires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 25' Wire gauge (all): 20 Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002275
Wire your vehicle with this universal, splice-in wiring harness so that you can connect the trailer's wiring to your vehicle's during towing. ... Features: Wire your vehicle with this universal, splice-in wiring harness so that you can connect the trailer's wiring to your vehicle's during towing Designed for use with 2-wire electrical systems 4-Pole flat vehicle-end connector plugs into the 4-way flat on your trailer Color-codedwires allow for simple hardwiring to existing trailer connections Specs: Harness length: 48" Wiring configuration White: ground wire Yellow: left turn/brake light Green: right turn/brake light Brown: tail lights 1-Year limited warranty
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are colorcoded to make installation a little easier.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with included quick-splice connectors Bonded wires are colorcoded (see wire configuration below) Includes durable, molded-rubber, standard female output socket Specs: Harness length: 60" Max amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
You're halfway through loading the trailer when your buddy shouts the lights aren't working. You check the plug. Wrong connector. No time to troubleshoot. You grab the harness, plug it in, and just like that, everything lights up.Highlights 4-Way Flat Connector Set: Links vehicle and trailer lighting systems with ease. Pre-Wired Leads: 12" trailer end and 48" vehicle end for flexible routing. Color-CodedWires: Simplifies installation with standard wiringcolors.
You're replacing the wiring on a trailer with surge brakes and want everything to work right the first time. This 5-wire flat set gives you the reverse lockout and all the lighting functions. ... Color-CodedWires: Simplifies installation with standard wirecolors. Weather-Resistant Housing: Helps protect against moisture and road grime.
You're sorting out a trailer light issue and don't want to rip everything apart. This loop lets you test wiring fast. Plug it in, check the LEDs, and see what's working. Saves time and frustration.Color-CodedWires: Standard colors for easy wiring reference. Plastic Housing: Helps block moisture and grime at the plug. Features to know about Simple Test or Connection Lead This 4-way flat loop gives you a quick way to connect trailer wiring or test circuits on the vehicle side.
You're upgrading your tow package or fixing bad wiring at the bumper. This 7-way comes pre-wired with blunt-cut leads so you can tie straight into your system. One part gets it done and gets you towing again.Highlights 7-Way Blade Socket: Standard vehicle-end plug for trailer lights, brakes, and 12V power. Pre-Wired Leads: Color-coded blunt-cut wires for easy hookup. Mounts to Bumper or Bracket: Fixed connection point at the rear of the vehicle.
You're wiring up the trailer and want it done right the first time. This 4-way flat connector has pre-stripped, color-codedwires and extra length to reach where you need. ... Highlights Standard 4-way flat connector: Compatible with most trailer wiring setups. 60" harness length: Gives you plenty of wire to route to your junction box or taillights. Pre-wired and color-coded: Matches standard trailer light wiring for simple installation.
... Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are colorcoded for easier installation.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are colorcoded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
Your trailer needs a 4-way, but your vehicle runs separate turn and brake signals. You wire it up anyway and the lights don't work. This converter fixes it. It handles the signal translation, so your trailer lights work every time.Highlights Signal Converter: Merges separate turn and brake signals for 4-flat trailer wiring. Standard 4-Way Flat Plug: Connects directly to trailer-side wiring. Color-Coded Leads: Makes install easier with matched wiring functions. 12" Pigtail Lead: Offers flexibility for routing and splicing.
... Designed for vehicles that have amber turn signals and incandescent bulbs. Includes wire taps and color-codedwires.This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights. Converter Wiring Configuration WireColorWire Function Green Right turn Brown Tail lights and parking lights Red Brakes White Ground Yellow Left turn Tail Light Converter Installation To begin the installation, use a circuit tester (sold separately) to double-check the function of each wire on your vehicle's tail light wiring harness.
Your trailer needs a 5-flat, but the vehicle runs separate turn and brake signals. This converter fixes it. It combines the signals, adds the reverse circuit, and gets your trailer lights working the way they should.Signal Conversion: Combines separate turn and brake lights for 5-flat wiring. Built-In Converter Box: Manages signal logic from vehicle to trailer. Color-Coded Leads: Makes installation easier with standard wirecolors.
... Metal socket has non-corroding, shock-resistant interior design that eliminates shorting out and is colorcoded to RVI standards.Features: Standard, 7-pole, RV-style socket connects tow vehicle to trailer Heavily plated metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded cover with stainless steel spring Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge At its widest point, the diameter of the round portion 1-7/8" Mounting holes are 1-1/2" from center to center vertically and 2-3/16" from center to center horizontally 1-Year limited warranty 12-703 Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End Replaces 30310
You're replacing a worn pigtail before a tow. This 48 inch vehicle-end 4 Flat gives you a clean, colorcoded lead so stop, turn, taillight, and ground are ready when you hook up.Highlights 48 Inch Lead: Extra length for clean routing. Vehicle-End 4 Flat: Standard vehicle-side connector. ColorCoded: Quick wire identification during install. Core Signals: Stop, turn, taillight, and ground supported. Bonded Wire: 16/18 gauge bundle stays organized.
You're fixing a short lead at the bumper. This 12 inch vehicle-end 4 Flat uses colorcoded bonded wire, and the included splices help you connect quickly so stop, turn, taillight, and ground are ready.Highlights 12 Inch Lead: Short length for clean routing. Vehicle-End 4 Flat: Standard vehicle-side connector. ColorCoded Bonded Wire: Quick identification during install. Core Signals: Stop, turn, taillight, and ground supported. Includes 3 Splices: Make connections without extra parts.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.To begin the installation, use a circuit tester (sold separately) to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first.
... Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-codedwires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.To begin the installation, use the included circuit tester to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first.
Use your Stealth Hitches rack receiver to tow a small trailer with this all-inclusive towing kit. Remove the receiver attachment from your hitch and insert the included ball mount. Custom-fit 4-way harness, hitch ball and safety chain loops included.Features: Complete kit lets you use your Stealth Hitches rack receiver (SHR31019) for towing Detachable ball mount locks into hitch in place of receiver attachment Mount securely attaches to your hitch's cross tube to eliminate rattle and play Included hitch ball provides connection point for your trailer's ball coupler Black powder coat finish on ball mount and safety chain loops offers superior rust protection 4-Way flat trailer connector mounts at the back of your vehicle to power your trailer's signal lights Connects directly to battery to avoid overloading vehicle's electrical system Wiring harness is compatible only with vehicles equipped with factory Trailer Tow Hitch Preparation Package (Option Code 8SL) Safety chain loops included Specs: Maximum gross trailer weight : up to 6,000 lbs Not rated for weight distribution systems Ball mount: Ball size: 2" Limited lifetime warranty
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.To begin the installation, use a circuit tester (sold separately) to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first.
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-codedwires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Filters
