Easily store up to 12 single-quart bottles of oil - or any other similarly sized cans, bottles or equipment - with this walled storage system. The dual-shelf cabinet can be mounted anywhere in your trailer, shop or garage for ultimate convenience.Features: Utility shelves offer a convenient storage option for tools and supplies Hold up to 12 single-quart bottles of motor oil Walled design helps to keep bottles and cans from falling off of shelves, especially during travel Sturdy, lightweight aluminum construction Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Dimensions: 17-1/2" tall x 15-1/2" wide x 5-1/2" deep Weight: 7 lbs
Designed to provide storage for all your fluids and lubricants, this aluminum shelf has 3 differently sized bins to accommodate aerosol cans, single-quart oil bottles and gallon containers.Features: Utility shelves are great for storing bottles and cans, as well as a variety of other items Top shelf is perfectly sized for aerosol cans Middle shelf is designed to hold quart bottles of oil Bottom shelf is large enough for gallon containers Walled design helps to keep bottles and cans from falling off of shelves, especially during travel Sturdy, lightweight aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Overall dimensions: 36" tall x 23" wide x 9" deep Top shelf depth: 2-3/4" Middle shelf depth: 5-1/8" Bottom shelf depth: 7-9/16" Weight: 18 lbs
Create shelves in your enclosed trailer by adding 2x4 beams and plywood sheets (not included) to these wall-mounted brackets.Install the brackets at the header of your trailer and you can use all of your floor space for your mowers or large gear.Features: Creates the base for a fully adjustable set of shelves for your enclosed trailer Fully customizable - make the shelves as deep or as shallow as necessary Can even create bunk beds Allows you to use all of your floor space to store mowers or other equipment Brackets install starting at the header of your trailer wall Constructed of sturdy steel Resists rust and corrosion with hammered paint finish Includes all necessary parts for 2 shelves - 4 pre-drilled brackets and 8 wood beam sockets 2x4 Lumber and plywood not included Specs: Overall bracket length: 49" Weight capacity: approximately 500 lbs
X track shelf bundle lets you create anchor points and build shelves or a storage rack on your trailer or in your workshop. The rails mount horizontally or vertically, and they accommodate any X track or E track strap, anchor, hook or accessory.Features: X track rails: Provide tie-down points for securing cargo on your trailer, truck or van Also works great on the wall in your garage or workshop For use with X track and E track straps, anchors, hooks, and other accessories X-shaped slots let you mount track vertically or horizontally on wall Provide more versatility for placement when compared with standard E track systems Easy installation with screws or rivets (not included) Zinc-plated steel construction is corrosion resistant Matte black color Board holders: Simple to build shelves or storage rack - just set boards inside holders Holes in sides of holders let you secure boards with screws (not included) Also create shoring beams to secure large, bulky items in your enclosed trailer Each shoring beam requires (1) 1-3/4" thick board Steel construction with yellow zinc plating is strong and corrosion resistant Easy installation of accessories - just snap spring-loaded fitting into E track or X track anchor points Accessories can be easily moved from one E track or X track slot to another Specs: X-track rails: Quantity: 4 Dimensions: 60" long x 5" wide x 1/4" tall Safe working load limit (WLL): 667 lbs Maximum load (break strength): 2,000 lbs Number of anchor slots: 15 Distance between mounting holes (center to center): Horizontal: 2" Vertical: 4-1/2" Diameter of mounting holes: 1/4" Distance between mounting holes (center to center): 4-1/2" Weight: 8.7 lbs Board holders: Quantity: 8 Dimensions: 3-3/4" deep x 2-15/16" tall x 2" wide Inside dimensions (edge to edge): 1-3/4" Weight: 0.94 lbs 1-Year limited warranty
Carry up to 6 shovels, rakes, brooms or other straight-handle tools on your open utility trailer with this easy-to-use system. Included shelves have pre-cut holes for shovels to fit through. Pre-drilled towers ease installation.Features: Holds 6 straight-handle shovels, brooms or rakes Designed for use on open, flatbed trailers Consists of 2 towers and 2 brackets with holes for tool handles to slip into Pre-drilled towers ease installation Hardware not included Constructed of sturdy steel Finished in gray powder coat for corrosion resistance Unique hammered pattern adds a touch of style Overall width: 30" 1-Year warranty
Carry up to 6 shovels, rakes, brooms or other straight-handle tools on your open utility trailer with this easy-to-use system. Included shelves have pre-cut holes for shovels to fit through. Designed to mount to Pack'em tower kit (PK-BM).Features: Holds 6 straight-handle shovels, brooms or rakes Designed to attach to your open utility trailer using Pack'em tower kit (PK-BM - sold separately) Can also be directly attached to the wall of your box truck or enclosed trailer Consists of 2 brackets with holes for tool handles to slip into Constructed of sturdy steel Finished in gray powder coat for corrosion resistance Unique hammered pattern adds a touch of style 1-Year warranty
... Includes 2 storage shelves and a spring-loaded paper towel rack.Features: Utility cabinet offers tons of convenient storage space for tools and supplies Fold-down tray lets you easily work on or clean small items Nylon bushings act as quiet, durable pivot points Tray folds up to double as cabinet door Top and bottom shelves are walled for more secure storage, especially during travel Items won't fall off of shelves Cabinet door conceals items on bottom shelf only Paper towel rack can hold 1 standard-size roll Spring-loaded design keeps roll from unraveling Rod secures with included clip Sturdy, lightweight aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Pre-drilled keyhole slots and 8 included mounting buttons and screws let you easily install and remove cabinet from wall Additional buttons (TWSP25BK - sold separately) can be mounted anywhere so that you can transfer cabinet from your trailer to your garage Specs: Overall dimensions: 22" tall x 12" wide x 5-3/4" deep Weight: 10 lbs This aluminum cabinet comes pre-drilled with keyhole-shaped slots that accept Tow-Rax 2.5-mm mounting buttons.
... Includes 3 storage shelves and a spring-loaded paper towel rack.Features: Utility cabinet offers tons of convenient storage space for tools and supplies Fold-down tray lets you easily work on or clean small items Nylon bushings act as quiet, durable pivot points Tray folds up to double as cabinet door Top, middle and bottom shelves are walled for more secure storage, especially during travel Items won't fall off of shelves Cabinet door conceals items on bottom shelf only Paper towel rack can hold up to 2 standard-size rolls Spring-loaded design keeps rolls from unraveling Rod secures with included clip Sturdy, lightweight aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Overall dimensions: 30" tall x 27" wide x 6" deep Weight: 25 lbs
Features: Bracket lets you attach a standard 2" board to an e track anchor on your trailer Build shelving, dividers, and cargo restraints Easily adjustable and removable with spring loaded clip Holes in bracket allow you to secure lumber (hardware sold separately) Use with horizontal, vertical and single e track Zinc-coated steel resists rust Specs: Quantity: 1 Inside width: 1-11/16" Use the wood beam socket to add standard lumber to an E Track anchoring system.
Optimize your trailer's storage by creating a shelf with this e track wood beam socket. Supports one end of a standard 2x4 board. 500-lb Load limit.Features: Create a shelf for extra storage in your trailer Just snap into an e track anchor and slide in a board Add another socket to hold opposite end of board in place Works with a standard 2x4 board (not included) Pre-drilled with holes in sides to secure wood with screws (not included) Attaches to e track easily with spring fitting Specs: Quantity: 1 socket bracket Overall dimensions: 3-3/8" long x 1-11/16" wide Safe working load limit (WLL): 500 lbs 1-Year limited warranty
Use the shelf portion of this storage system to stow your helmets, or any other type of gear, and hang items from the rod below the shelf. Hanging rod quickly removes with 2 clips so that you can easily slide things on and off the rod.Features: Utility shelves offer a convenient storage option for helmets and other gear Dual shelves have walled design to help keep items from falling off, especially during travel Removable bar lets you hang goggles, gloves and more below shelf Pull clips on either side of shelf to quickly remove bar Sturdy, lightweight aluminum construction Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Dimensions: 28" long x 7" tall x 15" deep Weight: 14 lbs
Mount this sturdy aluminum cabinet in your trailer, shop or garage to keep your tools organized. The top 2 shelves are lined with multiple slots for screwdrivers, wrenches or other small tools. ... Just attach the included buttons to the wall of your shop, garage or trailer, and then mount the cabinet by lining up the slots with the buttons and sliding the cabinet into place on the wall. You can also move the cabinet from one location to another.
Leave your stored battery plugged in without wondering if it's slowly losing ground. This 12V charger uses a 7-stage charging algorithm and storage mode to adjust charge levels over time, so the battery stays maintained between trips.When a stored battery has dropped too far, the charger can start the recovery process instead of refusing the connection. Leave It in Rougher Storage Areas Storage lots, trailer parking spots, and garage shelves expose chargers to moisture, dust, and grime that lighter-duty housings don't handle well.
Leave your stored battery plugged in without wondering if a maintainer is slowly cooking it. This 12V charger uses a 7-stage charging algorithm and storage mode to adjust charge levels over time, so the battery stays maintained between trips.When a stored battery has dropped too far, the charger can begin recovery instead of refusing to start. Leave It in Rougher Storage Spots Garage shelves, trailer storage areas, and similar spaces can expose a charger to moisture, dust, and grime that lighter-duty housings don't handle well.
... This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.It can keep rolling items stationary and get tools, cans, and other loose items up off the floor. You can install E Track on the wall or floor of your enclosed trailer, pickup truck bed, cargo van, delivery truck, semi-trailer, flatbed trailer, or other type of work or recreational vehicle. Use screws, bolts, or rivets (not included) to mount the E Track anywhere you want, just make sure you're drilling or screwing into a wood or metal surface with a solid backing.
Versatile table mounts to the wall and locks in place to support up to 100 lbs when in use. Unlock the struts and fold the table down for storage. Aluminum table extends out only 3" from wall when folded down and offers 6 sq ft of workspace.Features: Convenient table mounts to the wall and provides a sturdy 6-sq-ft workspace Space-saving design - table folds up against wall for storage Sits nearly flush against wall - extends out only 3" When not in use can be secured to the wall of your trailer with a bungee-style cord (sold separately) Support struts lock in place to secure table when in use Durable, lightweight 10-gauge aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Drilling required Mounting buttons (TWSP30BK - sold separately) let you easily remove table from wall and transfer from your trailer to your garage Specs: Tabletop dimensions: 45-1/2" long x 18-1/2" wide Weight capacity: 100 lbs Mounting bracket length: 13" Mounting holes: 32" apart on center
Mount this aluminum bin to the wall of your trailer, shop or garage to create a convenient storage area for quarts of oil, aerosol cans or a variety of other items. Raised walls keep your tools and equipment in place.Features: Utility bin is designed to hold bottles of oil or transmission fluid, cleaning supplies, tools, or any other sort of equipment Walled design prevents items from falling off of shelf, especially during travel Sturdy, lightweight aluminum construction is machine finished Limitless mounting options - install in your shop, garage or trailer Drilling required Hardware not included Specs: Dimensions: 31" long x 5" tall x 5-1/2" deep Weight: 4 lbs
Multipurpose utility shelf designed for your E-track system (sold separately) lets you neatly store your tools or other cargo off the floor and out of the way. Easily reposition shelf anywhere along track to maximize storage options.Features: Utility shelf offers storage space in your trailer, shop, or garage Holds your tools or other cargo Raised sides help to keep contents from sliding over the edge Spring-loaded fittings snap into anchor slots on E-track (sold separately) No drilling required Reposition anywhere along E-track Black powder coat finish resists rust and corrosion Dimensions: 18" wide x 10" deep Made in the USA 1-Year warranty
Conveniently store your motorcycle helmets or other gear on this aluminum shelf. Designed to mount out of the way in the corner of your toy hauler or garage, this rack has slots that run along all sides so that you can easily hang items too.Features: Utility shelves provide a compact storage option Dual-shelf unit holds 2 motorcycle or dirt bike helmets - 1 on each shelf Slotted edges let you hang items with hooks Corner-mount design saves space - perfect for a toy hauler or small garage Raised lip on each shelf helps to contain gear, especially during travel Durable, lightweight aluminum construction Limitless mounting options Drilling required Hardware not included Specs: Dimensions: 21" tall x 14-1/4" wide x 15-3/4" deep Weight: 11 lbs
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.These clearance lights indicate the width of the trailer when it is viewed from the back. To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function.
Free up trailer floor space by moving ladders and long materials overhead. This adjustable aluminum rack bolts to the upper trailer walls and fits enclosed trailers 6' to 8-1/2' wide. ... Highlights Keeps Long Cargo Off Your Trailer Floor: Crossbars sit above the roofline so ladders, pipe, and lumber don't take up valuable interior space. Adjusts to Fit Your Trailer Width: Crossbars expand to fit enclosed trailers from 6' to 8-1/2' wide.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment. Full Range Travel: Lift and drop leg combine for wide height adjustment on any terrain.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. ... This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer.
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. For trailers over 80" wide. Sealed, waterproof lenses.Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on right fender (passenger's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Width including lights: 2-1/8" Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Filters
