This part replaces 1 tracknut for your ThuleThule Tracker or Tracker II roof-rack foot. The tracknut attaches to the bottom of your roof-rack foot and installs in the track of your factory roof rack.Features: Replaces 1 tracknut for Thule Tracker II Half Foot Pack or Tracker roof-rack fit kits TK6, TK8 and TK9 Attaches to bottom of Tracker or Tracker II foot with carriage bolt (924-0617-15; sold separately) Mounts Tracker or Tracker II foot to factory roof-rack tracks Specs: Application: Thule Tracker II Half Foot Pack (TH4302) or Thule Tracker roof-rack fit kits TK6 (THTK6), TK8 (THTK8) and TK9 (THTK9)
This tracknut attaches to the bottom of your Thule Tracker fit kit foot and mounts in the factory roof-rack railing of your vehicle. The nut makes the foot adjustable, allowing you to customize your roof rack.Features: Replaces 1 tracknut for Thule Tracker roof-rack fit kit TK4 Attaches to Tracker foot with bolt and washer (sold separately) Fits in your vehicle's factory roof-rack railing, allowing foot to slide along track Creates adjustable roof-rack system Specs: Application: Thule Tracker Roof-Rack Fit Kit TK4 (THTK4)
Replaces 1 flanged nut insert for your Thule Top Track System (TP42 or TP54).Features: Replaces 1 flanged nut insert for your Thule roof-mounted Top Track system (TP42 or TP54)
Replaces 1 M5 hex nut for Thule roof-mounted, 60" long top track system (THTB60).Features: Replaces 1 M5 hex nut for Thule roof-mounted, 60" long top track system (THTB60)
This square nut is found in a number of DeWalt Contractor Series ladder racks and Thule roof-mounted bike carriers and is used primarily to install accessories into the tracks of load bars.Features: Replaces 1 square nut for DeWalt Contractor Series ladder racks and Thule roof-mounted bike racks Specs: Application: DeWalt Contractor Series ladder racks and Thule roof-mounted bike carriers (TH316, DCR316, TH329, DCALL329, TH339, TH349, TH518, TH594, TH599XTR and TH897XT)
These eye nut tie down anchors provide adjustable attachment points to secure cargo on your Front Runner universal tracks or your pickup's bed rails with channels. ... Features: Eye nut kit provides tie-down points for securing heavy loads to your Front Runner universal tracks (sold separately) or your pickup's bed rails with channels Works great with Front Runner Stratchit straps (sold separately) Easy, tool-free installation with included hardware - slide bolt into top channel and tighten down Black powder-coated steel resists corrosion Specs: Quantity: 2 eye nuts Dimensions: 2" long x 1-3/8" wide x 13/16" tall 3-Year warranty
Features: Replaces all mounting hardware for installing 1 set of Yakima roof-rack tracks Includes 14 PlusNuts, bolts and washers, and 2 PlusNut installation tools Specs: Application: Yakima 42" (Y01126) or 54" (Y01127) roof-rack tracks
Quick mount nuts allow you to attach Rhino-Rack Quick Mount legs to your factory roof rack tracks. Includes hardware for 2 legs.Features: Quick mount nuts let you mount Rhino-Rack Quick Mount legs to your factory tracks 4 Channel nut adapters included to mount 2 legs 5-Year warranty
Quick mount nuts allow you to attach Rhino-Rack Quick Mount legs to your factory roof rack tracks. Includes hardware for 8 legs.Features: Quick mount nuts let you mount Rhino-Rack Quick Mount legs to your factory tracks 16 Channel nut adapters included to mount 8 legs 5-Year warranty
Quick mount nuts allow you to attach Rhino-Rack Quick Mount legs to your factory roof rack tracks. Includes hardware for 6 legs.Features: Quick mount nuts let you mount Rhino-Rack Quick Mount legs to your factory tracks 12 Channel nut adapters included to mount 6 legs 5-Year warranty
Replaces the installation tool for your Yakima PlusNut track hardware.Features: Replaces the installation tool for Yakima PlusNut track hardware 1996 and newer 2 Tools included
Replaces damaged or missing Rola Track M6 x 20.57 mm x 3.5 mm brass hex nuts.Features: Replaces missing or damaged Rola Track M6 x 20.57 mm x 3.5 mm brass hex nuts Quantity: 10
Quick mount nuts allow you to attach Rhino-Rack Quick Mount legs to your factory roof rack tracks. Includes hardware for 4 legs.Features: Quick mount nuts let you mount Rhino-Rack Quick Mount legs to your factory tracks 8 Channel nut adapters included to mount 4 legs 5-Year warranty
Adapters allow you to mount Rhino-Rack RLT600 legs to your Thule roof rack tracks. Includes hardware for 4 legs.Features: Adapters allow you to mount Rhino-Rack RLT600 legs to your Thuletracks 8 Channel nut adapters included to mount 4 legs 3-Year limited warranty
Use your Rhino-Rack Heavy-Duty accessories on your vehicle with Thule or Yakima roof-rack tracks. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty square, aluminum crossbars slide along tracks to accommodate gear.Features: Adjustable roof-rack lets you carry gear on your vehicle's Thule or Yakima roof-rack tracks 2 Heavy-Duty black, square crossbars hold ladder racks, conduit cases and other work accessories Bars mount to roof-rack legs using built-in channels on bottoms of bars Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability Built-in C-channel on top of each bar lets you mount Rhino-Rack Heavy-Duty accessories and carriers Rubber strips in the channels help to cushion load and provide slip resistance Can be cut to accommodate track-mounted accessories and carriers 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars Durable, glass-reinforced nylon construction Quick-release trigger system allows for easy, tool-free installation Squeeze internal triggers to release legs from bases Slide triggers apart to secure legs to bases Bases remain mounted to tracks Locks in covers let you secure the system to your vehicle Pivoting bases offer 33 degrees of adjustment to help level crossbars Precision-molded inserts cover bases when the legs are removed Specs: Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Crossbar dimensions: 54" long x 1-5/8" wide x 1-7/8" tall Leg height: 3" Limited lifetime warranty The bases of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks.
Your truck needs to be ready for more than one job a day. This rack carries long cargo overhead so your truck bed stays usable for tools, bins, and bags. And you can adjust the height as the load changes and stop reshuffling before you hit the road.Height That Matches the Load: Run it low for tents or bikes and raise it for kayaks or lumber. Ready for Your Gear: Crossbars with upper and lower T-tracks support clamp-on and channel-mount accessories. Rated for Heavy Loads: Holds up to 300 lbs at highest position and 500 lbs at lowest.
Your truck needs to be ready for more than one job a day. This rack carries long cargo overhead so your truck bed stays usable for tools, bins, and bags. And you can adjust the height as the load changes and stop reshuffling before you hit the road.Height That Matches the Load: Run it low for tents or bikes and raise it for kayaks or lumber. Ready for Your Gear: Crossbars with upper and lower T-tracks support clamp-on and channel-mount accessories. Rated for Heavy Loads: Holds up to 300 lbs at all height positions. Solid Support on the Road: Wide bases and rigid uprights keep loads firmly supported.
Use your Rhino-Rack Heavy-Duty accessories on your vehicle with Thule or Yakima roof-rack tracks. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty square, aluminum crossbars slide along tracks to accommodate gear.Features: Adjustable roof-rack lets you carry gear on your vehicle's Thule or Yakima roof-rack tracks 2 Heavy-Duty black, square crossbars hold ladder racks, conduit cases and other work accessories Bars mount to roof-rack legs using built-in channels on bottoms of bars Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability Built-in C-channel on top of each bar lets you mount Rhino-Rack Heavy-Duty accessories and carriers Rubber strips in the channels help to cushion load and provide slip resistance Can be cut to accommodate track-mounted accessories and carriers 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars Durable, glass-reinforced nylon construction Quick-release trigger system allows for easy, tool-free installation Squeeze internal triggers to release legs from bases Slide triggers apart to secure legs to bases Bases remain mounted to tracks Locks in covers let you secure the system to your vehicle Pivoting bases offer 33 degrees of adjustment to help level crossbars Precision-molded inserts cover bases when the legs are removed Specs: Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Crossbar dimensions: 65" long x 1-5/8" wide x 1-7/8" tall Leg height: 3" T-slot dimensions: 1-3/8" wide x 5/8" tall T-slot top opening: 13/16" Underbar slot: Full length Limited lifetime warranty The bases of these Rhino Rack legs easily mount into Thule or Yakima roof-rack tracks.
Replaces 1 M6 square nut for your Thule ProBar Evo load bars. Works with hexagonal screw (sold separately) to attach endcap to ProBar.Features: Replaces 1 M6 square nut for your Thule ProBar Evo load bars Works with hexagonal screw (sold separately) to attach endcap to ProBar Includes 1 square nut Fits: Thule ProBar Evo: 713600 and 713700
Replaces the barrel nut for your Thule Upride bike carrier (TH599000 and TH599000-FB) or Thule ProRide XT (TH598004 and TH598004-FB). Installs in the non-locking lever on the rear mounting plate.Features: Replaces the barrel nut for your Thule Upride bike rack (TH599000 or TH599000-FB) or Thule ProRide XT (TH598004 and TH598004-FB) Installs in the non-locking lever on the rear mounting plate Quantity: 1 barrel nut
Replace 1 barrel nut on your Big Mouth or Doubletrack bike rack to ensure that it stays clamped securely to your roof-rack load bars. Nut is the axle on which cam handles of your clamping mechanism turn and serves as mounting point for clamp T-bolts.Features: Replaces 1 barrel nut (M6 x 18 mm) for your Thule Big Mouth roof-mounted bike rack or Thule Doubletrack hitch-mounted bike rack Serves as axle on which the cam handles of your bike carrier rotate Provides attachment point for clamp T-bolts Specs: Application: Thule Big Mouth Roof-Mounted Bike Rack (TH599XTR) or Thule Doubletrack Hitch-Mounted Bike Rack (TH990XT)
Replace a lost or damaged Thule hand knob and nut. This replacement 3-wing, tri-lobed knob-and-nut set restores secure clamping on compatible Thule bike racks.Features: Replaces a Thule 3-wing (tri-lobed) hand knob and matching nut Used on Thule Elite Van XT, Sport G2, and Elite G2 bike racks Includes both the knob and matching nut for proper clamping Direct replacement for lost or damaged Thule knob-and-nut hardware Fits: Thule Sport G2 Bike Racks Thule Elite G2 Bike Racks Thule Elite Van XT Bike Racks
Replace 1 barrel nut on your Criterium bike rack to ensure that it stays clamped securely to your roof-rack load bars. Nut is the axle on which cam handles of your clamping mechanism turn and serves as mounting point for clamp T-bolts.Features: Replaces 1 barrel nut for your Thule Criterium roof-mounted bike carrier Serves as axle on which the cam handles of your bike rack rotate Provides attachment point for clamp T-bolts Specs: Application: Thule Criterium Roof-Mounted Bike Rack (TH598) Length: 23 mm
Filters
