This MPPTcontroller is built to squeeze every possible watt from your solar panels, even in partial shade. With ultra-fast tracking, smart battery protection, and easy app based control, it is designed for efficient, worry free solar charging.Features: High efficiency MPPT solar charge controller designed to extract the maximum possible energy from solar panels while protecting connected batteries Maximum efficiency up to 98 percent with natural cooling and no fan Engineered to operate reliably in tough environmental conditions Ultrafast Maximum Power Point Tracking technology that improves energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced MPPT algorithm for partial shading scenarios that locks onto the optimal power point to avoid energy loss Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages to suit different battery types Compatible with lithium, AGM, gel, and flooded batteries Adaptive charging profiles tailored to battery chemistry Battery protection features built into SafetyShield+ to extend battery life and prevent damage Temperature compensated charging and over temperature protection Protection against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart connectivity for wireless setup, monitoring, synchronization, and firmware updates through the VictronConnect app Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management support through the VRM portal when paired with a communication center System performance analysis, alerts, and multi system management from anywhere Easy setup and system integration using VictronConnect with battery presets, configuration tools, and real time performance data Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V auto select Rated charge current: 30 amps Nominal PV power: 12V: 440 watts 24V: 880 watts Maximum PV open circuit voltage: 100V Maximum efficiency: 98 percent Dimensions: 5-1/8" tall x 7-5/16" wide x 2-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 2.86 lbs 5-Year warranty
Camp off grid for a long weekend with this complete solar kit for your RV. Gives you 800 watts of solar power generation with an efficent MPPT solar controller. Includes a powerful, all-in-one pure sine wave inverter charger.That's because the MPPT solar controller functions with greater efficiency than a PWM solar controller. Basically, a MPPT solar controller can convert excess voltage into amps, charging your battery bank faster.
This MPPTcontroller is built to squeeze every possible watt from your solar panels, even in partial shade. With ultra-fast tracking, smart battery protection, and easy app based control, it is designed for efficient, worry free solar charging.Features: High efficiency MPPT solar charge controller designed to extract the maximum possible energy from solar panels while protecting connected batteries Maximum efficiency up to 98 percent with natural cooling and no fan Engineered to operate reliably in tough environmental conditions Ultrafast Maximum Power Point Tracking technology that improves energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced MPPT algorithm for partial shading scenarios that locks onto the optimal power point to avoid energy loss Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages to suit different battery types Compatible with lithium, AGM, gel, and flooded batteries Adaptive charging profiles tailored to battery chemistry Battery protection features built into SafetyShield+ to extend battery life and prevent damage Temperature compensated charging and over temperature protection Protection against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart connectivity for wireless setup, monitoring, synchronization, and firmware updates through the VictronConnect app Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management support through the VRM portal when paired with a communication center System performance analysis, alerts, and multi system management from anywhere Easy setup and system integration using VictronConnect with battery presets, configuration tools, and real time performance data Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V auto select Rated charge current: 50 amps Nominal PV power: 12V: 700 watts 24V: 1,400 watts Maximum PV open circuit voltage: 100V Maximum efficiency: 98 percent Dimensions: 5-1/8" tall x 7-5/16" wide x 2-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 2.86 lbs 5-Year warranty
MPPT charge controller turns available sunlight into usable power while protecting battery health. With ultra-fast tracking, intelligent charging, and built-in safety features, it delivers efficient, reliable solar charging in demanding conditions.Features: MPPT solar charge controller designed to maximize energy harvest while protecting connected batteries in a compact and robust design Lightning-fast maximum power point tracking that converts available sunlight into usable energy, even in partially shaded conditions Intelligent charge algorithms that manage bulk, absorption, and float stages to improve charging efficiency and extend battery life Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charge profiles Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center connected via VE.Can Built-in SafetyShield+ protection with safeguards against over-temperature, short-circuit, and reverse polarity conditions Bluetooth Smart connectivity for configuration, monitoring, and control using the VictronConnect app VE.Direct port for wired connection to a communication center and access to the VRM remote management portal Remote monitoring and management through VRM for system visibility, alerts, and performance analysis from anywhere Easy setup and integration using VictronConnect with battery presets, real-time monitoring, and usage history Optional built-in extras on select models including relay and on/off terminals, optional plug-in display, and MC4 connectors on MC4 models Specs: Battery voltage: 12/24V/48V auto select Rated charge current: 70 amps Nominal PV power: 12V: 1,000watts 24V: 2,000 watts 48V: 4,000 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 7-5/16" tall x 9-13/16" wide x 3-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 6.61 lbs 5-Year warranty
This MPPT charge controller is built to get the most energy from your solar panels while protecting your batteries. With ultra-fast tracking, flexible connectivity, and built in safety features, it supports efficient and reliable solar charging.Features: MPPT solar charge controller designed to maximize solar energy harvest while protecting connected batteries in a compact and robust design Natural cooling with no fan and efficiency exceeding 99 percent Engineered to withstand tough operating conditions VE.Can connectivity for synchronized multi controller systems Daisy chain and synchronize up to 25 controllers using VE.Can Synchronize up to 10 controllers using Bluetooth Ultra-fast Maximum Power Point Tracking that improves energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple MPPs are present due to partial shading Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages Fully programmable with eight pre programmed charge profiles Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection Built in SafetyShield+ protection features that extend battery life and improve system safety Temperature compensated charging with internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart functionality for wireless setup, monitoring, updates, and charging synchronization VE.Direct and VE.Can ports for wired connection to GX devices, computers, and remote management systems Remote monitoring and control through the VRM portal when paired with a communication center System data access, alerts, forecasting, and multi system management Built in extras on select models including relay and on off terminals for automated load management and remote operation Optional pluggable LCD display that connects directly to the front of the controller for viewing essential device information Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/36V/48V auto select Rated charge current: 75 amps Nominal PV power: 12V: 1,000 watts 24V: 2,000 watts 36V: 3,000 watts 48V: 4,000 watts Maximum PV open circuit voltage: 250V Maximum efficiency: 99 percent Dimensions: 7-5/16" tall x 9-13/16" wide x 3-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 6.61 lbs 5-Year warranty
This MPPTcontroller is built to squeeze every possible watt from your solar panels, even in partial shade. With ultra-fast tracking, smart battery protection, and easy app based control, it is designed for efficient, worry free solar charging.Features: SmartSolar MPPT charge controller built to maximize solar energy harvest while protecting battery health in demanding operating environments Up to 98 percent efficiency with natural cooling and no fan Compact and robust design engineered for tough conditions Lightning fast Maximum Power Point Tracking that extracts energy even in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent charge algorithm that automatically manages bulk, absorption, and float stages to maximise charging efficiency and protect batteries Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles SafetyShield+ protection system that extends battery life using temperature compensated charging and multiple electronic safeguards Over temperature protection with power derating Protection against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart functionality for wireless setup, monitoring, firmware updates, and charging synchronization through the VictronConnect app Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management capability through the VRM portal when paired with a communication center Performance analysis, alerts, forecasting, and multi system oversight Easy setup and system integration using the VictronConnect app with configuration tools, battery presets, and real time performance monitoring Fully discharged battery recovery function that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/48V auto select Rated charge current: 45 amps Nominal PV power: 12V: 650 watts 24V: 1,300 watts 48V: 2,600 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 5-1/8" tall x 7-5/16" wide x 2-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 2.75 lbs 5-Year warranty
MPPT charge controller turns available sunlight into usable power while protecting battery health. With ultra-fast tracking, intelligent charging, and built-in safety features, it delivers efficient, reliable solar charging in demanding conditions.Features: MPPT solar charge controller designed to maximize energy harvest while protecting connected batteries in a compact and robust design Lightning-fast maximum power point tracking that converts available sunlight into usable energy, even in partially shaded conditions Intelligent charge algorithms that manage bulk, absorption, and float stages to improve charging efficiency and extend battery life Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charge profiles Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center connected via VE.Can Built-in SafetyShield+ protection with safeguards against over-temperature, short-circuit, and reverse polarity conditions Bluetooth Smart connectivity for configuration, monitoring, and control using the VictronConnect app VE.Direct port for wired connection to a communication center and access to the VRM remote management portal Remote monitoring and management through VRM for system visibility, alerts, and performance analysis from anywhere Easy setup and integration using VictronConnect with battery presets, real-time monitoring, and usage history Optional built-in extras on select models including relay and on/off terminals, optional plug-in display, and MC4 connectors on MC4 models Specs: Battery voltage: 12/24V/48V auto select Rated charge current: 60 amps Nominal PV power: 12V: 860 watts 24V: 1,720 watts 48V: 3,440 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 7-5/16" tall x 9-13/16" wide x 3-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 6.61 lbs 5-Year warranty
Enjoy a weekend off grid with this complete solar kit for your RV. Gives you 400 watts of solar power generation, an efficent MPPT solar controller, and a powerful pure sine wave inverter charger. A great kit if you plan to add more panels later on.That's because the MPPT solar controller functions with greater efficiency than a PWM solar controller. Basically, a MPPT solar controller can convert excess voltage into amps, charging your battery bank faster.
Solar charge controller uses ultra-fast MPPT technology to harvest energy from solar panels and charge your batteries. It supports remote monitoring and system visibility through GX devices, Bluetooth accessories, or GlobalLink for flexible access.Features: Solar charge controller designed to harvest energy from photovoltaic panels and charge batteries Ultra-fast maximum power point tracking technology (MPPT) for improved energy harvest Optimized performance in changing light and clouded conditions Advanced maximum power point detection for partial shading scenarios High efficiency conversion design with no cooling fan Fully programmable charge algorithm flexibility for different battery requirements 8 Preprogrammed charge profiles selectable by rotary switch Integrated protection and temperature management Over temperature protection with power derating PV short circuit, reverse polarity, and reverse current protection Internal temperature sensor for absorption and float voltage compensation Remote monitoring and control capability GX device compatibility for real time data display VictronConnect access using a VE.Direct Bluetooth Smart dongle VRM portal access when connected through a GX device GlobalLink 520 compatibility for remote installations without internet Specs: Battery voltage: 12 V, 24 V, and 48 V Rated charge current: 35 amps Dimensions: 5-1/8" tall x 7-3/8" wide x 2-3/4" deep Nominal PV power: 12 V: 500 watts 24 V: 1,000 watts 36 V: 1,500 watts 48 V: 2,000 watts Maximum PV short circuit current: 40 amps Maximum PV voltage: 150 V: Absolute maximum coldest conditions 145 V: Start-up and operating maximum Operating temperature range: -22 to 140 degrees F (-30 to 60 degrees C) Maximum efficiency: 98 percent IP rating: IP43 Weight: 2.75 lbs 5-Year warranty
This MPPT charge controller is built to get the most energy from your solar panels while protecting your batteries. With ultra-fast tracking, flexible connectivity, and built in safety features, it supports efficient and reliable solar charging.Features: MPPT solar charge controller designed to maximize solar energy harvest while protecting connected batteries in a compact and robust design Natural cooling with no fan and efficiency exceeding 99 percent Engineered to withstand tough operating conditions VE.Can connectivity for synchronized multi controller systems Daisy chain and synchronize up to 25 controllers using VE.Can Synchronize up to 10 controllers using Bluetooth Ultra-fast Maximum Power Point Tracking that improves energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple MPPs are present due to partial shading Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages Fully programmable with eight pre programmed charge profiles Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection Built in SafetyShield+ protection features that extend battery life and improve system safety Temperature compensated charging with internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart functionality for wireless setup, monitoring, updates, and charging synchronization VE.Direct and VE.Can ports for wired connection to GX devices, computers, and remote management systems Remote monitoring and control through the VRM portal when paired with a communication center System data access, alerts, forecasting, and multi system management Built in extras on select models including relay and on off terminals for automated load management and remote operation Optional pluggable LCD display that connects directly to the front of the controller for viewing essential device information Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/36V/48V auto select Rated charge current: 100 amps Nominal PV power: 12V: 1,450 watts 24V: 2,900 watts 36V: 4,350 watts 48V: 5,800 watts Maximum PV open circuit voltage: 250V Maximum efficiency: 99 percent Dimensions: 8-1/2" tall x 11-5/8" wide x 4-1/16" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 9.92 lbs 5-Year warranty
Solar charge controller uses ultra-fast MPPT technology to harvest energy from solar panels and charge your batteries. It supports remote monitoring and system visibility through GX devices, Bluetooth accessories, or GlobalLink for flexible access.Features: Solar charge controller designed to harvest energy from photovoltaic panels and charge batteries Ultra-fast maximum power point tracking technology (MPPT) for improved energy harvest Optimized performance in changing light and clouded conditions Advanced maximum power point detection for partial shading scenarios High efficiency conversion design with no cooling fan Fully programmable charge algorithm flexibility for different battery requirements 8 Preprogrammed charge profiles selectable by rotary switch Integrated protection and temperature management Over temperature protection with power derating PV short circuit, reverse polarity, and reverse current protection Internal temperature sensor for absorption and float voltage compensation Remote monitoring and control capability GX device compatibility for real time data display VictronConnect access using a VE.Direct Bluetooth Smart dongle VRM portal access when connected through a GX device GlobalLink 520 compatibility for remote installations without internet Specs: Battery voltage: 12 V and 24 V Rated charge current: 50 amps Dimensions: 5-1/8" tall x 7-5/16" wide x 2-3/4" deep Nominal PV power: 12 V: 700 watts 24 V: 1,400 watts Maximum PV short circuit current: 60 amps Maximum PV open circuit voltage: 100V Operating temperature range: -22 to 140 degrees F (-30 to 60 degrees C) Maximum efficiency: 98 percent IP rating: IP43 Weight: 2.86 lbs 5-Year warranty
This MPPT charge controller helps you get more energy from your solar panels while keeping batteries protected. Ultra-fast tracking, intelligent load control, and flexible monitoring make solar charging efficient and reliable day to day.Features: SmartSolar MPPT solar charge controller engineered to extract maximum energy from solar panels while protecting connected batteries Up to 98 percent efficiency with natural cooling Compact and robust design built for tough conditions Ultra-fast Maximum Power Point Tracking technology that maximizes energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent charge algorithm that automatically manages bulk, absorption, and float stages to optimize charging efficiency and protect batteries Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles Intelligent load output with built in protection that disconnects loads at a preset voltage to prevent excessive battery discharge BatteryLife intelligent battery management algorithm that adjusts load disconnect levels to ensure regular full recharging and extend battery life SafetyShield+ protection features that prioritize battery care and system safety Temperature compensated charging and internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart connectivity for wireless setup, monitoring, updates, and charging synchronization using the VictronConnect app Wireless charging synchronization that allows multiple MPPTs to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management through the VRM portal when paired with a communication center Performance analysis, alerts, forecasting, and multi system oversight Easy setup and system integration using VictronConnect with battery presets, configuration tools, and real time performance monitoring Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V auto select Rated charge current: 15 amps Nominal PV power: 12V: 220 watts 24V: 440 watts Maximum PV open circuit voltage: 75V Maximum efficiency: 98 percent Dimensions: 4-1/2" wide x 3-7/8" tall x 1-1/2" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 1.1 lbs 5-Year warranty
MPPT charge controller is designed to maximize solar energy harvest while protecting batteries in demanding conditions. With ultra-fast tracking, flexible connectivity, and built in safety features, it supports efficient and reliable solar charging.Features: MPPT solar charge controller designed to maximize energy harvest while protecting connected batteries in a compact and robust design Up to 98 percent efficiency with natural cooling and no fan Engineered to withstand tough operating conditions VE.Can connectivity for multi controller systems and synchronized charging Daisy chain up to 25 MPPTcontrollers for coordinated operation All units can send data to a communication center over a single cable Ultra-fast Maximum Power Point Tracking that extracts energy even in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages Fully programmable with 8 pre-programmed charge profiles Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles Built-in SafetyShield+ protection features that extend battery life and improve system safety Temperature compensated charging and internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built-in Bluetooth Smart functionality for wireless setup, monitoring, updates, and charging synchronization Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center Remote monitoring and control through the VRM portal when paired with a communication center System performance data, alerts, forecasting, and multi system management Built in extras on select models including relay and on off terminals for automated load management and remote operation Optional pluggable LCD display that connects directly to the front of the controller for viewing essential device information Fully discharged battery recovery function that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/36V/48V auto select Rated charge current: 85 amps Nominal PV power: 12V: 1,200 watts 24V: 2,400 watts 36V: 3,600 watts 48V: 4,900 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 8-1/2" tall x 11-5/8" wide x 4-1/16" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 9.92 lbs 5-Year warranty
The Bravo 50 amp hour MPPT solar charge controller is designed with RVs, trailers, campers, vans, boats, and off-grid in mind.Features: Reverse discharge protection Targeted for accurate custom setting Over voltage protection Short circuit protection Internal Bluetooth capability External battery temperature sensor capability Specs: System nominal voltage: 12/24 V auto Maximum PV open circuit voltage: 100 VOC Charging technology: MPPT Max PV charging currant: 50 amps Net weight: 3.09 lbs Dimensions: 7 11/16" x 5 1/2" x 2 29/32"
This MPPT charge controller helps you get more energy from your solar panels while keeping batteries protected. Ultra-fast tracking, intelligent load control, and flexible monitoring make solar charging efficient and reliable day to day.Features: SmartSolar MPPT solar charge controller engineered to extract maximum energy from solar panels while protecting connected batteries Up to 98 percent efficiency with natural cooling Compact and robust design built for tough conditions Ultra-fast Maximum Power Point Tracking technology that maximizes energy harvest in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent charge algorithm that automatically manages bulk, absorption, and float stages to optimize charging efficiency and protect batteries Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles Intelligent load output with built in protection that disconnects loads at a preset voltage to prevent excessive battery discharge BatteryLife intelligent battery management algorithm that adjusts load disconnect levels to ensure regular full recharging and extend battery life SafetyShield+ protection features that prioritize battery care and system safety Temperature compensated charging and internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart connectivity for wireless setup, monitoring, updates, and charging synchronization using the VictronConnect app Wireless charging synchronization that allows multiple MPPTs to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management through the VRM portal when paired with a communication center Performance analysis, alerts, forecasting, and multi system oversight Easy setup and system integration using VictronConnect with battery presets, configuration tools, and real time performance monitoring Fully discharged battery recovery capability that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/48V auto select Rated charge current: 20 amps Nominal PV power: 12V: 290 watts 24V: 580 watts 48V: 1,160 watts Maximum PV open circuit voltage: 100V Maximum efficiency: 98 percent Dimensions: 3-15/16" tall x 5-5/32" wide x 2-3/8" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 1.43 lbs 5-Year warranty
MPPT charge controller is designed to maximize solar energy harvest while protecting batteries in demanding conditions. With ultra-fast tracking, flexible connectivity, and built in safety features, it supports efficient and reliable solar charging.Features: MPPT solar charge controller designed to maximize energy harvest while protecting connected batteries in a compact and robust design Up to 98 percent efficiency with natural cooling and no fan Engineered to withstand tough operating conditions VE.Can connectivity for multi controller systems and synchronized charging Daisy chain up to 25 MPPTcontrollers for coordinated operation All units can send data to a communication center over a single cable Ultra-fast Maximum Power Point Tracking that extracts energy even in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent and flexible charge algorithm that automatically manages bulk, absorption, and float stages Fully programmable with 8 pre-programmed charge profiles Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles Built-in SafetyShield+ protection features that extend battery life and improve system safety Temperature compensated charging and internal temperature sensing Over temperature protection and safeguards against PV short circuit, reverse polarity, and reverse current Built-in Bluetooth Smart functionality for wireless setup, monitoring, updates, and charging synchronization Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center Remote monitoring and control through the VRM portal when paired with a communication center System performance data, alerts, forecasting, and multi system management Built in extras on select models including relay and on off terminals for automated load management and remote operation Optional pluggable LCD display that connects directly to the front of the controller for viewing essential device information Fully discharged battery recovery function that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/36V/48V auto select Rated charge current: 100 amps Nominal PV power: 12V: 1,450 watts 24V: 2,900 watts 36V: 4,350 watts 48V: 5,800 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 8-1/2" tall x 11-5/8" wide x 4-1/16" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 9.92 lbs 5-Year warranty
Solar charge controller uses ultra-fast MPPT technology to harvest energy from solar panels and charge batteries efficiently. Advanced power point detection, high conversion efficiency, and flexible charging help support long term battery health.Features: Solar charge controller designed to harvest energy from photovoltaic panels and charge batteries Ultra-fast maximum power point tracking technology for improved energy harvest Optimized performance in changing light and clouded conditions Energy harvest improvement compared to PWM and slower MPPTcontrollers Advanced maximum power point detection for partial shading conditions Automatic selection of the optimum maximum power point when multiple points are present High conversion efficiency design with passive cooling No cooling fan required Maximum efficiency exceeding 98 percent Charge algorithm flexibility for different battery requirements Fully programmable charge algorithm 8 Preprogrammed charge profiles selectable with a rotary switch Integrated electronic protection system Over temperature protection with power derating PV short circuit, reverse polarity, and reverse current protection Battery sensing and temperature compensation capability Internal temperature sensor for charge voltage compensation Optional external battery voltage, temperature, and current sensing via Bluetooth accessories Remote monitoring and control capability VictronConnect access using a VE.Direct Bluetooth Smart dongle VRM portal access when connected through a GX device GlobalLink 520 compatibility for remote installations without internet Specs: Battery voltage: 12 V, 24 V, and 48 V Rated charge current: 60 amps Dimensions: 7 1/4" tall x 9 13/16" wide x 3-3/4" deep Nominal PV power: 12 V: 860 watts 24 V: 1,720 watts 48 V: 3,440 watts Maximum PV short circuit current: 50 amps Maximum PV open circuit voltage: 150V Operating temperature range: -22 to 140 degrees F (-30 to 60 degrees C) Maximum efficiency: 98 percent IP rating: IP43 Weight: 6.6 lbs 5-Year warranty
Using a flexible 190-watt solar panel and solar controller, this charging system provides an extra boost to your RV batteries while on the road. Panel flexes to fit on curved surfaces. MPPTcontroller optimizes solar panel output for maximum charge.How It Installs The system includes a 190-watt solar panel, a 30-amp MPPT solar controller, MC4 cables, and all the necessary installation hardware. Solar Panel: The solar panel installs anywhere on your RV roof with included mounting hardware.
This MPPTcontroller is built to squeeze every possible watt from your solar panels, even in partial shade. With ultra-fast tracking, smart battery protection, and easy app based control, it is designed for efficient, worry free solar charging.Features: SmartSolar MPPT charge controller built to maximize solar energy harvest while protecting battery health in demanding operating environments Up to 98 percent efficiency with natural cooling and no fan Compact and robust design engineered for tough conditions Lightning fast Maximum Power Point Tracking that extracts energy even in changing light and partially shaded conditions Up to 30 percent higher yield compared to PWM charge controllers Up to 10 percent higher yield compared to slower MPPTcontrollers Advanced Maximum Power Point Detection algorithm that locks onto the optimal power point when multiple peaks occur due to partial shading Intelligent charge algorithm that automatically manages bulk, absorption, and float stages to maximise charging efficiency and protect batteries Wide battery compatibility supporting lithium, AGM, gel, and flooded batteries with automatic voltage selection and dedicated charging profiles SafetyShield+ protection system that extends battery life using temperature compensated charging and multiple electronic safeguards Over temperature protection with power derating Protection against PV short circuit, reverse polarity, and reverse current Built in Bluetooth Smart functionality for wireless setup, monitoring, firmware updates, and charging synchronization through the VictronConnect app Wireless charging synchronization that allows multiple controllers to coordinate charge stages using Bluetooth or a GX communication center VE.Direct communication port for wired connection to GX devices, computers, and the VRM remote management platform Remote monitoring and management capability through the VRM portal when paired with a communication center Performance analysis, alerts, forecasting, and multi system oversight Easy setup and system integration using the VictronConnect app with configuration tools, battery presets, and real time performance monitoring Fully discharged battery recovery function that initiates charging from zero volts and reconnects to Li ion batteries with integrated disconnect protection Specs: Battery voltage: 12/24V/48V auto select Rated charge current: 35 amps Nominal PV power: 12V: 500 watts 24V: 1,000 watts 48V: 2,000 watts Maximum PV open circuit voltage: 150V Maximum efficiency: 98 percent Dimensions: 5-1/8" tall x 7-5/16" wide x 2-3/4" deep Operating temperature: -22 to 140 degrees F (-30 to 60 degrees C) Protection category: IP43 Weight: 2.75 lbs 5-Year warranty
This solar charging system helps get you off the grid with 800-watt solar panels that provide DC power to charge your RV's batteries. (2) 30-Amp MPPT solar controllers optimize output for maximum charge and prevent harmful overcharging.Lastly, the controller includes several built-in safety features to help protect your equipment. The charging process will shut down if the controller starts to overheat and when an overcurrent is detected.
This solar charge controller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.Highlights High-Efficiency MPPTController: Tracks the sweet spot for your panels, turning sunshine into more usable power. Flexible Battery Support: Works with lithium, gel, lead acid, and more - just set it and go.
This efficient solar charge controller works seamlessly with your PowerTrak setup for advanced solar monitoring. It's dual-bank compatible and stackable, meaning that it is a great option if you are building out a large solar array on your RV.Features: 40-Amp solar controller prevents harmful overcharging of your batteries Automatic multistage charging switches modes as the battery charges to extend battery life Preset charging profiles for lithium, AGM, gel, and flooded batteries MPPT technology optimizes panel output to charge batteries faster than PWM controllers Solar systems with large battery banks benefit from increased efficiency Parallel capability lets you connect up to 5 total controllers for a max solar array of 200 amps PowerTrak Screen compatible for monitoring and configuring power settings (sold separately) Compatible with multiplex systems Allows connection via Bluetooth to monitor status on your smart device Specs: Application: 12V and 24V battery and solar systems Works with lithium-ion, AGM, gel, and flooded lead acid batteries Maximum solar array current: 40 amps Maximum solar panel input voltage: 96 volts open circuit Maximum PV power input: 900 watts at 12 volts 1,800 watts at 24 volts Operating temperature: -40 F to 140 F Weight: 1 lb Dimensions: 8" long x 5" wide x 3" tall 5-Year warranty What is the Go Power PowerTrak System?
The Rich Solar charge controller protects your system from wiring slip-ups, overcharging, and shorts, so you can focus on the road ahead. Clear directions make DIY installs possible, so you can get set up and stay powered wherever you land.Highlights High-Efficiency MPPTController: Tracks the sweet spot for your panels, turning sunshine into more usable power. Flexible Battery Support: Works with lithium, gel, lead acid, and more - just set it and go.
Filters
