Plug this adapter into your existing 7-way when towing a trailer equipped with LEDlights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles with Trailer Lamp-Out sensors.Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your vehicle's computer No cutting or splicing required Great for use on vehicles with Trailer Lamp-Out sensors, such as Audi, Mercedes-Benz, and Volkswagen vehicles with the factory tow package Spring-loaded dust cover protects terminals from moisture and debris when connector is not in use 1-Year limited warranty
This LEDlight bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flat tow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. ... These built-in LEDs don't just look dope - they're great for safety too, especially when you're driving at night. They light up the space between your RV and your toad (towed vehicle) and alert other drivers to the fact that you're towing a vehicle behind your RV.
Stick these bright, efficient LEDlights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. ... Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Lasts 50 times longer Attaches with magnets Protective label keeps the magnets from scratching your car Works year-round Lens housing is sonically sealed and waterproof Includes 2 red LEDlights and wiring harness with 4-way flat trailer connector Meets DOT standards Specs: Universal fit for all vehicles Light diameter: 4-1/4" Overall dimensions: 3-7/8" long x 5-15/16" tall x 2-3/16" wide Towlight harness length: 245" Wiring length between lights: 63" Length of additional wiring harness for RV: 35" Diodes (per light): 6 Power draw at 12.8 volts Stop/turn signal light: 0.36 amps Tail light: 0.03 amps Lifetime warranty on LEDs Will These Magnetic Lights Work On My Vehicle?
Stick these bright, efficient LEDlights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. ... Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Attaches with magnets Includes 2 red LEDlights and wiring harness with 4-way flat trailer connector Specs: Light diameter: 4" Wiring harness length: 20' Operating range: 8V - 16V Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! ... Features: LEDlight strips adhere to the rear of your car and display brake and turn signals No modification to your vehicle No risk of damage from electrical feedback Great for cars that are not compatible with traditional wiring diodes IP68 rating protects LEDlights from moisture and dust Color-coded Y wiring harness reaches both sides of the car for easy installation Kit includes everything you need to wire your vehicle's tail lights for flat towing (2) 10" Long LED strips with 3M adhesive 2 Plug-and-play flip latch wiring connectors Wiring harness Zip ties and cable tie mount pads LED output: 152 lumens Made in the USA Limited lifetime warranty
This LEDlight bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 7-way round. ... Features: Wireless light bar and transmitter Transmitter plugs into tow vehicle's 7-way socket Bright and efficient LEDs Rechargeable battery 12V DC charging cord included Easy to store Convenient handle Super durable so you can use year-round Durable polyethylene housing won't warp or crack Heavy-duty magnets Rubber coating protects your car from scratches DOT compliant Made in the USA Specs: Light bar dimensions: 23" long x 5" tall x 2-1/2" thick Magnet base diameter: 3-1/2" Diodes: 17 total Front bar: 11 Turn signal: 2 per signal Side markers: 1 per signal Charge cord length: 6' 3-Year limited warranty
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They install right into the tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge Light output per bulb: 144 Lumens 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They fit nicely inside your vehicle's tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 white LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
This LEDlight bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 4-pin round. ... Features: Wireless light bar and transmitter Transmitter plugs into tow vehicle's 4-pin socket Bright and efficient LEDs Rechargeable battery 12V DC charging cord included Easy to store Convenient handle Super durable so you can use year-round Durable polyethylene housing won't warp or crack Heavy-duty magnets Rubber coating protects your car from scratches DOT compliant Made in the USA Specs: Light bar dimensions: 23" long x 5" tall x 2-1/2" thick 4-Pin connector dimensions: 5-1/4" long x 2-5/16" wide x 2" thick Magnet base diameter: 3-1/2" Diodes: 17 total Front bar: 11 Turn signal: 2 per signal Side markers: 1 per signal Cord length: 6' Battery life: approximately 4-8 hours 3-Year limited warranty
These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your vehicle's tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red bulbs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome sold separately Made in the USA Specs: Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Hole required for sockets: 1" diameter Wire loom: Length: 3' Diameter: 1/2" Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! ... Highlights Complete Flat Tow Wiring Kit: Combines light kit and 7-way to 6-way cord. No Vehicle Wiring Changes: LED strips avoid tapping into factory wiring. Bright LED Signal Display: Shows brake and turn signals while towing.
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! ... Highlights Complete Flat Tow Wiring Kit: Combines light kit and 7-way to 6-way cord. No Vehicle Wiring Changes: LED strips avoid tapping into factory wiring. Bright LED Signal Display: Shows brake and turn signals while towing.
Curt 7-way connector to 4-way or 5-way flat connector is designed for use on vehicles with Trailer Lamp-Out sensors when towing a trailer equipped with LEDlights.Features: 7-Way RV style adapter to 4-pole and 5-pole flat trailer connectors Designed for use on vehicles with Trailer Lamp-Out sensors - such as Audi, Mercedes-Benz, Porsche, and Volkswagen vehicles with the factory tow package Plugs into a 7-way connector on the vehicle and 4-way or 5-way flat connector on the trailer 1-Year limited warranty
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.They install permanently, but don't worry; everything will work as normal when you're not flat towing. What if I Have Incandescent Tail Lights? This kit is designed to work with LEDlights only, so if you have incandescent variable voltage lights, you'll need kit RM26FR (sold separately) instead.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This complete kit includes everything you need for multiplex LED tail lights.They install permanently, but don't worry; everything will work as normal when you're not flat towing. What if I Have Incandescent Tail Lights? This kit is designed to work with LEDlights only, so if you have incandescent variable voltage lights, you'll need kit RM26FR (sold separately) instead.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This kit is for variable voltage/multiplex LED tail lights.They install permanently, but don't worry; everything will work as normal when you're not flat towing. What if I Have Incandescent Tail Lights? This kit is designed to work with LEDlights only, so if you have incandescent variable voltage lights, you'll need kit RO94FR (sold separately) instead.
Smart diodes are our favorite option for getting brake and turn signals on your towed car. They are really well-made and reliable, plus pretty easy to install. This kit is for variable voltage/multiplex LED tail lights.They install permanently, but don't worry; everything will work as normal when you're not flat towing. What if I Have Incandescent Tail Lights? This kit is designed to work with LEDlights only, so if you have incandescent variable voltage lights, you'll need kit RO94FR (sold separately) instead.
These smart diodes ensure your RV's brake and turn signals display correctly on your car's multiplex LED tail lights. Prevents damage from electrical feedback. Includes 2 diodes.They install permanently, but don't worry; everything will work as normal when you're not flat towing. What if I Have Incandescent Tail Lights? This kit is designed to work with LEDlights only, so if you have incandescent variable voltage lights, you'll need kit RO34FR (sold separately) instead.
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LEDlight. This red light can function as a rear side marker or clearance light. ... Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. ... These built-in LEDs don't just look dope - they're great for safety too, especially when you're driving at night. They light up the space between your RV and your toad (towed vehicle) and alert other drivers to the fact that you're towing a vehicle behind your RV.
... No time to rewire. You grab the adapter, snap it into place, and the lights fire up. Quick fix, solid connection, and you're back on schedule.Features to know about Quick Connection with Visual Confirmation This adapter converts your vehicle's 7-way blade socket to a 4-way flat plug, allowing you to tow trailers with different wiring configurations. The built-in LED illuminator lights up when the connection is secure, providing immediate feedback without additional tools or testers.
Filters
