4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
This lens replaces the red lens on your Command Electronics LED triple tail light. Works with 328-003-30LEM2. Simple screw-on installation.Features: Replaces the red lens on your Command Electronics LED triple tail light Works with 328-003-30LEM2 Durable acrylic construction Screw-on design - hardware not included
This chrome trim ring adds a decorative look to your 3-3/4" long oval LED clearance or side marker light. Fits Command Electronics 328-K-51 and 328-K-52 lights.Features: Chrome trim ring adds a decorative look to your oval LED clearance or side marker lights Fits Command Electronics 3-3/4" LED clearance lights (328-K-51 and 328-K-52 - sold separately) Simple snap-on installation Specs: Outer dimensions: 5-1/16" long x 1-3/4" tall x 1/2" thick Inner dimensions: 3-3/8" long x 1-3/8" tall 1-Year limited warranty
This chrome trim ring adds a decorative look to your oval LED trailer tail light. Fits Command Electronics trailer combination tail light (328-003-85).Features: Chrome trim ring adds a decorative look to your LED trailer tail light Fits Command Electronics trailer combination tail light (328-003-85 - sold separately) Simple snap-on installation Specs: Outer dimensions: 9-3/4" long x 4-1/4" tall x 1-1/8" thick Inner dimensions: 8-3/4" long x 3-1/2" tall 1-Year limited warranty
This lens replaces the clear lens on your Command Electronics LED triple tail light. Works with 328-003-30LEM2. Simple screw-on installation.Features: Replaces the clear lens on your Command Electronics LED triple tail light Works with 328-003-30LEM2 Durable acrylic construction Screw-on design - hardware not included
This chrome trim ring adds a decorative look to your 3/4" diameter round LED bullet clearance, side marker, or utility light. Fits Command Electronics 328-003-183AA, 328-003-183RR, 328-003-183CW, and 328-ET003184CWM lights.Features: Chrome trim ring adds a decorative look to your Command Electronics LED bullet clearance, side marker, or utility lights Fits clearance or side marker lights (328-003-183AA and 328-003-183RR - sold separately) Also works with utility lights (328-003-183CW and 328-ET003184CWM - sold separately) Simple installation - secures between light and rubber grommet Specs: Outer diameter: 1-1/8" Inner diameter: 5/8" 1-Year limited warranty
Replaces the frosted plastic lens for your Command Electronics Glantastic LED RV puck light (328-K-58L34P9).Features: Replaces the frosted plastic lens for your Command Electronics Glantastic LED RV puck light (328-K-58L34P9) Fits: Model number 328-K-58L34P9 , Command Electronics Glantastic LED RV puck light
Replaces the lens for your Command Electronics multipurpose LED utility light with a clear lens (328-007-06WE).Features: Replaces the lens for your Command Electronics multipurpose LED utility light with a clear lens (328-007-06WE) Fits: Command Electronics multipurpose LED utility light with a clear lens: 328-007-06WE
9-1/2" LED light displays brake, tail, and turn signals on the passenger side of your trailer. Includes rear reflex reflector. Mounts to the surface of your trailer and hardwires with the 3-wire pigtail harness.Features: Oval brake, tail, and turn signal light Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base and acrylic lens Surface mount Can be mounted horizontally or vertically Available chrome trim ring (328-89-378 - sold separately) provides a finished look 3-Wire pigtail harness White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Configuration: passenger's side (right hand) Driver side: 328-003-85L (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" thick Compatible with 12V DC systems Diodes: 22 Wire length: 7" 1-Year limited warranty
Use integrated toggle switch or wire to a light switch to turn this single dome light on and off. Included incandescent bulb is perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Or perhaps you need to upgrade the dim, old lights in your enclosed trailer? This incandescent dome light gives you warm, yellow light underneath a kitchen cabinet, in a walkway, or inside your pop-up camper.
18-7/8" L x 2" W x 13/16" D; chrome base; enhances appearance of Thin Line series LED lights; surface mountFeatures: Chrome base enhances appearance of Thin Line series LED lights MCL78RB/RBF/REZB or MCL88RCB, STL79RB, STL80RB, STL89RCB/RCPG or STL90RCB Surface mount 18-7/8" Long x 2" wide x 13/16" deep Surface-mount chrome base enhances appearance of Thin Line series LED lights.
Replaces the mounting gasket for your Command Electronics Hot-Line LED backup light (328-003-6017W). Includes pressure sensitive adhesive on one side of the mounting gasket for secure installation.Features: Replaces the mounting gasket for your Command Electronics Hot-Line LED backup light (328-003-6017W) Includes pressure sensitive adhesive on one side of the mounting gasket for secure installation
Lens mounting hardware for multipurpose LED light. Attaches the lens to the base of the light. Works with Command Electronics 007-60 series lights.Features: Mounting hardware for multipurpose LED light (328-007-60WE - sold separately) Attaches the lens to the base of the light Works with Command Electronics 007-60 series lights Includes (2) #6-20X5/8" stainless steel screws Assembled in the USA
3/4" Round. Mini trailer light serves as either a side marker light or clearance light. Durable polycarbonate base and acrylic lens. Recessed mount with included black grommet. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
3/4" Round. Mini utility light produces bright white light to illuminate an area. Durable polycarbonate base and acrylic lens. Recessed mount with included black grommet. 2-Wire pigtail.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
Wire this waterproof dome light to a switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner. Cool white LEDs are more energy-efficient, last longer, and burn brighter than incandescents.Features: Single dome light is perfect underneath an RV kitchen cabinet or inside an enclosed trailer Low-voltage cutoff at 11V DC prevents battery drain Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Clear plastic lens is less likely to shatter than a glass lens Sealed, white polycarbonate plastic construction is waterproof Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included Wires to a light switch inside your RV or camper - white for ground and black for power Specs: Overall dimensions: 6-1/8" diameter x 5/8" deep Mounting hole spacing (center to center): 4-3/4" Voltage: 12V and 24V DC Power draw: At 12V: 0.408 amps At 24V: 0.385 amps Light output: Raw lumens: 250 lumens Effective lumens: 214 lumens Number of LEDs: 21 Lifetime warranty on LEDs Need extra light over your RV kitchen sink for when you do the dishes?
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.Features: Rectangular LED trailer light works as a stop, turn, tail, and reverse light functions LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Red and clear lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 4-Wire design DOT compliant Specs: Dimensions: 9-5/8" long x 7" tall x 5/8" deep Diodes: 20 Wire length: 7" Weight: 0.95 lbs 1-Year limited warranty
14" x 6-7/8" Rectangle. Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. ... Features: Triple LED trailer light provides stop, turn, tail, and backup light function LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base and lens Red and clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included Wire functions: Red: stop and turn White: ground Black: tail lights Purple: reverse or backup DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Overall dimensions: 14" long x 6-7/8" tall x 1" deep Quantity: 1 1-Year limited warranty
9-1/2" x 4" Oval. LED Trailer tail light with 22 diodes provides stop, turn, tail, rear reflex, and license plate light functions. Durable polycarbonate base. Surface mounts to driver side of trailer with included bracket. 3-Wire design.Features: Oval LED trailer light works as a stop, turn, tail, and license plate light for driver side applications Includes rear reflex reflector and license plate mounting bracket LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Red lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - no cutout required 3-Wire design White wire is the ground Brown wire is for the tail lights Red wire is for the stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Configuration: driver's side (left hand) Passenger side: 328-003-85 (sold separately) Dimensions: 9-1/2" long x 4" tall x 1-3/16" deep Diodes: 22 Wire length: 7" 1-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, turn, tail, and rear reflex functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
15-1/4" x 1-1/4" x 1/2". Waterproof, LED trailer light with 13 diodes provides stop, tail, and turn functions. Premium LEDs last up to 100,000 hours. Durable polycarbonate base. Surface mounts to trailer. 3-Wire pigtail.Mounting hardware is used to secure the light to the trailer.
4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Filters
