If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.It's a complete, one-and-done upgrade that makes every trip to the ramp easier. Specs Fit Works with: 2x6 bunk boards (not included) Covers: (2) 8' long bunks (8-piece modular kit) Material Construction: polyvinyl Color: black Hardware: includes stainless steel screws Dimensions & Weight Overall fit: 8' long x 6" wide x 2" tall bunks Large slides: 3' long Small slides: 1' long Total weight: 6.4 lbs General: Warranty: 1-year limited Made in the USA
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 6-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Each 6-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.It's a complete, one-and-done upgrade that makes every trip to the ramp easier. Specs Fit Works with: 2x6 bunk boards (not included) Covers: (2) 8' bunks (8-piece modular kit) Material Construction: polyvinyl Color: white Hardware: includes stainless steel screws Dimensions & Weight Overall fit: 8' long x 6" wide x 2" thick bunks Large slides: 3' long Small slides: 1' long Total weight: 6.4 lbs General: Warranty: 1-year limited Made in the USA
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Specs Quantity 2 bunks with 6 rollers each Dimensions & Weight Bunk length: 5' Weight: 37.36 lbs Material Rollers: black rubber Frame: galvanized steel General Warranty: 1-year limited Made in the USA
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boat trailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black rubber rollers absorb road shock and protect hull from scratches 12 Gauge galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with swivel mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 6 rollers each Weight capacity: 1,500 lbs Bunk length: 5' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Specs Quantity 2 bunks with 6 rollers each Dimensions & Weight Bunk length: 5' Weight: 37.36 lbs Material Rollers: amber poly Frame: galvanized steel General Warranty: 1-year limited Made in the USA
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 4-piece kit is pre-formed to quickly cover two 8' bunks.You'll get years of reliable use without needing replacement, which means more time enjoying the water and less time worrying about maintenance. Complete Kit for Two 8' Bunks Each 4-piece pack is designed to cover a pair of 8-footbunks completely, so you don't have to figure out how many sections or feet of material you need.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Highlights Set Your Pontoons on Track: Slotted holes let you line up 6' and 4' bunks so the logs settle square and load clean. Wide Base for Stability: A broad plate spreads the load across your bunk board for a steady ride.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.It's a cleaner, lower-maintenance option made to hold up through years of loading and unloading. Plus, this kit comes with end caps. Not only will your bunks have a clean, seamless look, you won't have to deal with exposed carpet staples and they help prevent board rot. Installs Over Standard Bunk Boards You'll need to remove the carpet from your bunks before installing these wraps, but once they're on, you're done.
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... Clean, Finished Look These molded endcaps cover the exposed ends of your bunks to prevent splintering and help seal out moisture. They pair perfectly with Caliber wrap and give your setup a smooth, professional-looking finish.
Durable, aluminum replacement bracket works with another 90-degree bracket (sold separately) to stabilize 1 end of an extra-large bunk board on your boat trailer. Installs on level trailer frames with a U-bolt (sold separately).Features: Replaces 1 damaged CE Smith 90-degree, vertical bunk bracket on your trailer Stabilizes 1 end of the bunk board when used with additional bracket (sold separately) Requires 1/2" diameter U-bolt (sold separately) for installation Constructed of rustproof, corrosion-resistant aluminum Great for freshwater and saltwater use Made in the USA Specs: Quantity: 1 bracket Dimensions: 6" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Rustproof Aluminum Construction Aluminum offers excellent, long-term defense against rust and corrosion, making it great for saltwater applications.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). Pre-drilled holes let you raise or lower your board.Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 6" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Helps Your Boat Slide On Easier This wrap's slick surface reduces friction, so instead of cranking your boat off sticky bunks, your boat will glide on and off the trailer with less effort. That means less strain on your ropes, pulleys, bow eyes, and your arms!
Give your trailer bunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... Clean, Finished Look These molded endcaps cover the exposed ends of your bunks to prevent splintering and help seal out moisture. They pair perfectly with Caliber wrap and give your setup a smooth, professional-looking finish.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailer bunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.Helps Your Boat Slide On Easier This wrap's slick surface reduces friction, so instead of cranking your boat off sticky bunks, your boat will glide on and off the trailer with less effort. That means less strain on your ropes, pulleys, bow eyes, and your arms!
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 5-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Each 5-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 4-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Each 4-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 3-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Each 3-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Features: Carpeted, wooden bunk boards support your boat's hull during trailering Marine-grade black carpeting is strong, soft, and weather resistant Minimizes scratches on the hull Resists mold and mildew Rinses off easily and dries quickly Bunk boards install easily in either of 2 ways Mount to existing brackets on trailer frame Attach to trailer frame with swivel brackets (sold separately), allowing for height and angle adjustment Specs: Quantity: 2 bunk boards Dimensions: 24" long x 2" wide x 4" tall
Filters
