These reflective triangles provide a visual warning to vehicles and pedestrians during roadside incidents. Foldable design makes them easy to setup. Heavy bases and non-skid tabs keep triangles in place. Includes storage case.
Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. Fits 14-1/4" x 14-1/4" openings.
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 35" axle spacing. Built-in grease zerks for easy lubrication. Heavy-duty shackle straps ensure strength.
Replaces 1 shackle link with bolts from your Dexter trailer suspension kit. Works with both heavy-duty suspension kits and E-Z Flex suspension kits.Features: Replaces the shackle link and bolts from your Dexter suspension kit Works with heavy-duty suspension kits (K71-359-00, K71-360-00, K71-448-00, K71-449-00, and K71-453-00) Works with E-Z Flex suspension kits (K71-652-00, K71-653-00, K71-656-00, and K71-657-00) Includes 1 shackle link with bolts Specs: Bolt dimensions: Overall length: 3-1/4" Usable length: 2-1/4" Shackle dimensions: Overall length: 3-3/4" Distance between bolt holes (center to center): 2-1/4"
Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.Features: LED hitch cover light comes on automatically when your put your vehicle in reverse Brake light acts as a fourth brake light bringing greater visibility to your vehicle Optional safety strobe lets you set your brake light to flash 3 times when braking - increasing visbility TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures your lights to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.Features: LED hitch cover light comes on automatically when your put your vehicle in reverse Brake light acts as a fourth brake light bringing greater visibility to your vehicle Optional safety strobe lets you set your brake light to flash 3 times when braking - increasing visbility TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures your lights to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.Features: LED hitch cover light comes on automatically when your put your vehicle in reverse Brake light acts as a fourth brake light bringing greater visibility to your vehicle Optional safety strobe lets you set your brake light to flash 3 times when braking - increasing visbility TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures your lights to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.Features: LED hitch light comes on automatically when your put your vehicle in reverse High-powered red light acts as a fourth brake light when you apply your brakes SafetyStrobe feature on brake light can be activated for greater visibility Optional strobing effect can be easily disabled if desired TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures light to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.Features: LED hitch cover light comes on automatically when your put your vehicle in reverse Brake light acts as a fourth brake light bringing greater visibility to your vehicle Optional safety strobe lets you set your brake light to flash 3 times when braking - increasing visbility TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures your lights to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Diode Dynamic's Stage Series hitch-mounted LED acts as a reverse and running light, brightening your surroundings and increasing visibility for you and other drivers. Plug and play system installs and uninstalls quickly.Features: Hitch-mounted LED comes on automatically when your put your vehicle in reverse Additional red running light option can be used while driving With C1R LED pods you also get a 4th brake light (sold separately) TIR optics prevents glare by keeping light output from being lost in the outer lens Included wiring harness connects to your factory 7-way connector for simple and fast installation Slides into your hitch receiver to help keep out dirt and deter rust Free, lockable hitch pin (included) secures lights to your receiver Pin-fin heatsinks on the back of the housing dissipate heat quickly to increase longevity Black powder-coated aluminum housing is waterproof Testing is completed to SAE standards just like your factory lighting components Specs: Application: 2" x 2" trailer hitch receivers Light dimensions: 2" wide x 2" tall x 2-3/8" deep Weight: 0.35 lbs Operating voltage: 9-16V Wattage: 12.8 watts Power draw: 1 amp Lumens: Raw: 1,449 Measured: 1,030 Peak beam intensity: 400 candela Illuminance: 4 lux @ 10 m Color temperature: 6000 K IP rating: IP67K Operating temperature: -40 F to 185 F 8-Year limited warranty Note: Does not work with closed hitch receivers
Avoid damage to your vehicle by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.
Replaces a flange nut for your Dexter trailer suspension kit. Works with EZ-Flex, heavy-duty, suspension, and tandem axle attaching parts kits.Features: Replaces a flange nut for your Dexter trailer suspension kit Works with the following Dexter trailer suspension kits: EZ-Flex (K71-652-00 or K71-656-00) Heavy-duty (K71-358-00, K71-359-00, K71-360-00, K71-448-00, K71-449-00, or K71-453-00) Suspension (K71-401-00, K71-402-00, or K71-403-00) Tandem axle (K71-660-00) Specs: Flange nut dimensions: 7/16"-20 Quantity: 1 flange nut
This aerodynamic roof rack gives you the freedom to haul gear and cargo on your vehicle. Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. Installs on your vehicle's naked roof.
A tilting hitch platform designed for the Thule Arcos hitch cargo carrier box. Thanks to the tool-free AutoAttach system, mounting the platform is effortless. The integrated lever provides a secure fit, ensuring confidence on every journey.Quickly tilts up to stow vertically when not in use, reducing the rear footprint Compact storage: Folds up vertically when not in use, reducing the rear footprint Specs: External dimensions: 44.9" x 27.6" x 13.39" Weight: 37.2 lbs Fits 2" receiver Locks included One Key System compatible
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Filters
