This 400-ampfuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 400-Ampfuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
400-Amp DC-rated, Class T inverter fuse protects your equipment during power use. Slow blow functionality utilizes a time-delay feature to withstand surge current. ... Features: 400-Amp DC-rated, Class T fuse protects your equipment during power use Slow blow functionality utilizes a time-delay feature to withstand surge current and ensure equipment works properly Polycarbonate block with protective transparent cover houses the fuse Insulated polyester reinforced construction Easy installation with included hardware Includes stainless steel studs and optional universal terminal lugs Connects to the positive terminal on your inverter and battery with battery cable (sold separately) Made in the USA Specs: Application: 12-volt, 24-volt, 32-volt, or 48-volt inverter battery systems Works with: 3,000-watt (12 volt) Amp rating: 400ampsFuse type: Class T Interrupt rating: 50,000 amps DC rating: 160 VDC Dimensions: 6-3/8" wide x 1-11/16" tall x 3-1/8" deep Weight: 0.9 lbs
Replaces the fuse in your Go Power inverter fuse block. 400-ampfuse installs to existing fuse block between your batteries and inverter.Features: Replaces the fuse in your Go Power inverter fuse block Works with: 3,000-watt inverters (12 volt) Includes (1) 400-ampfuse
This 400-ampfuse breaks the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch and your vehicle's battery.Features: 400-Ampfuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuse holder (sold separately) lets you mount fuse on your Jeep or truck Specs: Qty: 1 Length: 3-1/8" Width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This install kit comes with everything you need to connect a Go Power inverter to your RV battery. 400-Ampfuse works with 2,600 to 3,000 watt 12V inverters and 4,100 to 6,000 watt 24V inverters. Includes fuse mounting block, cables, and hardware.Features: Inverter installation kit connects a Go Power inverter to your RV battery 400-Amp DC-rated, Class T fuse protects your equipment during power use Polycarbonate block with protective transparent cover houses the fuse Insulated polyester reinforced construction Easy installation with included hardware Made in the USA Specs: Application: 12V and 24V inverters Works with: 12V: 2,600 - 3,000 watts 24V: 4,100 - 6,000 watts Fuseamp rating: 400ampsFuse type: Class T Fuse interrupt rating: 50,000 ampsFuse DC rating: 160 VDC Fuse block dimensions: 6-3/8" wide x 1-11/16" tall x 3-1/8" deep Cable length: 10' each Cable gauge: 4/0
This fuse holder lets you permanently mount a 300-, 350-, or 400-amp ANL fuse for a Bulldog Winch off-road winch near the battery of your Jeep or truck. ... Features: Fuse holder for 300-, 350-, and 400-amp Bulldog Winch off-road winches Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws
This 350-ampfuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 350-Ampfuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This 300-ampfuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. ... Features: 300-Ampfuse helps prevent your Bulldog Winch off-road winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation ANL fuse handles higher amperage when compared with many other fuse types Fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck Compatible with 0- to 4-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 5-mm Hex key (sold separately) required to tighten set screws Specs: Qty: 1 fuseFuse length: 3-1/8" Fuse width: 5/8" Distance between mounting points (center to center): 2-3/8" Distance from side to center of mounting point: 3/8" Mounting slot opening: 3/16"
This install kit comes with everything you need to connect a Go Power inverter to your RV battery. 60-Ampfuse works with 200 to 400 watt 12V and 24V inverters. Includes cables and hardware.Features: Inverter installation kit connects a Go Power inverter to your RV battery 60-Amp DC-rated, ATC fuse protects your equipment during power use Block with protective cover houses the fuse Easy installation with included hardware Made in the USA Specs: Application: 12V and 24V inverters Works with: 200 - 400 watts Fuseamp rating: 60 ampsFuse type: Class T Cable length: 10' each Cable gauge: #6
3,000-Watt inverter charger combines a pure sine wave inverter, converter charger, and automatic transfer switch. Saves space and simplifies installation by consolidating 3 vital components into 1 compact unit. Includes fixed-mount remote.This means it can handle short surges over 400amps without blowing the fuse, which is great for devices with motors that require more energy to start. Battery Temperature Sensor Adds Additional Battery Protection The battery temperature sensor protects the battery bank from large temperature fluctuations.
400-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. ... This means it can handle short surges over 60 amps without blowing the fuse, which is great for devices with motors that require more energy to start. How It Installs The inverter mounts inside your RV in a dry location with ventilation.
400-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. ... This means it can handle short surges over 60 amps without blowing the fuse, which is great for devices with motors that require more energy to start. How It Installs The inverter mounts inside your RV in a dry location with ventilation.
When you only need to keep essentials running off-grid, this unit covers smaller loads without stepping up to a larger inverter. PowerAssist supports weak inputs, and search mode cuts idle draw so batteries last longer.Specs Application: 12V battery systems Inverter Rated Power: Continuous output power at 77ºF: 1,000 watts (1,200 volt-amps) Peak power (starting/surge): 2,400 watts Inverter: DC Input voltage range: 9.5V to 17V Output voltage: 120 VAC Output frequency: 60 Hz Maximum efficiency: 93 percent Zero load power: 13 watts Charger: Input voltage: 90 VAC to 140 VAC, 45 Hz to 65 Hz Absorption voltage: 14.4 VDC Float voltage: 13.8 VDC Storage mode voltage: 13.2 VDC Charge current for house battery: 50 amps Charge current for starter battery: 1 amp Transfer Switch: Amperage: 16 amps DC Fuse: Internal fuse amperage: 200 amps Connections: Battery connection: 35mm 120V AC connection: G-ST18i Environmental and Protection: Operating temperature range: -40ºF to 149ºF IP rating: IP22 Construction: Material: steel and ABS Dimensions and Weight: Dimensions: 16" tall x 9-13/16" wide x 3-15/16" deep Weight: 18.1 lbs Warranty: 5-Year warranty
These 200-ampfuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV. ... Features: 200-Ampfuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV Compatible with 4- to 8-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 3-mm Hex key (not included) required to tighten set screws Specs: Qty: 4 fusesFuse length: 1-5/8" Fuse width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
These 250-ampfuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV. ... Features: 250-Ampfuses help prevent your Bulldog Winch ATV/UTV winch from overheating Connect between your winch motor and your vehicle battery's positive lead Fuse blows when it detects excessive current pull from winch motor Stops flow of power from vehicle's battery Requires replacement if blown Window on fuse housing provides visible indication of connector blade separation AFS fuse handles higher amperage when compared with many other fuse types Fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV Compatible with 4- to 8-gauge wires Easy installation next to vehicle's battery using 1/8" self-tapping screws (not included) Cut wire at desired location, strip insulation back 1/2" on each side, insert into openings, tighten set screws 3-mm Hex key (not included) required to tighten set screws Specs: Qty: 4 fusesFuse length: 1-5/8" Fuse width: 7/16" Distance between mounting points (center to center): 1-1/4" Distance from side to center of mounting point: 1/4" Mounting slot opening: 3/16"
When you're running shore power and a generator in the same setup, this unit handles both through dual AC inputs. PowerAssist covers load spikes while matching a 24V system, so appliances stay on without extra switching gear.It pairs that load support with a 50 amp AC input and 2,400 watts of continuous output power at 77ºF with 5,500 watts of peak power. In real use, that gives you more room to run real household loads when incoming AC power is the bottleneck.
This inverter charger powers 2 AC output circuits from a 50 amp input and helps prevent overload during demand spikes. It delivers 2,400 watts of continuous output, 120-amp battery charging, and under 20 ms transfer for sensitive electronics.Keep Sensitive Loads Running Without Interruptions: Under 20 ms transfer maintains power to electronics. Handle Real Appliance Startup Surges: 2,400 watt continuous with 5,500 watt peak supports microwave startup loads. Recharge Batteries Quickly Between Use Cycles: Built-in charger delivers up to 120 amps for faster recovery.
When a microwave pushes a limited hookup too far, this unit adds battery power through PowerAssist to keep loads running. Built around a 12V system with a 120 amp charger, it keeps appliances on and batteries recovering between cycles.Handle Real Appliance Startup Surges: 2,400 watt continuous with 5,500 watt peak supports microwave startup loads. Recharge Batteries Quickly Between Use Cycles: Built-in charger delivers up to 120 amps for faster recovery.
Running a 50 amp coach on battery can leave one leg dead or let 240V loads drain the bank fast. This inverter charger powers both output lines with 120V off-grid and blocks 240V loads without split phase input, so critical circuits stay on.Keeps Critical Loads Running During Outages: Main output transfers in under 18 milliseconds on L1. Runs High-Demand Appliances Reliably: 2,400 watt continuous and 5,500 watt surge support startup loads. Features to know about Keeps Both Legs Powered Off-Grid Losing one leg in a 50 amp coach can knock out outlets and create workarounds you shouldn't need.
When heavier loads push limited shore power too far, this unit adds battery support through PowerAssist to carry the demand. With 2,400 watts continuous output and dual AC outputs, it keeps priority loads running while managing battery use.Specs Application: 12V battery systems Inverter Rated Power: Continuous output power at 77ºF: 2,400 watts (3,000 volt-amps) Peak power (starting/surge): 6,000 watts Inverter: DC Input voltage range: 19V to 33V Output voltage: 120 VAC Output frequency: 60 Hz Maximum efficiency: 93 percent Zero load power: 20 watts Charger: Input voltage: 95 VAC to 140 VAC, 45 Hz to 65 Hz Absorption voltage: 14.4 VDC Float voltage: 13.8 VDC Storage mode voltage: 13.2 VDC Charge current for house battery: 120 amps Charge current for starter battery: 4 amps Transfer Switch: Amperage: 50 amps Connections: Battery connection: M8 bolts (2 plus and 2 minus connections) 120V AC connection: screw terminals 13mm (6 AWG) Environmental and Protection: UL listing: UL 458 and UL 1741 Operating temperature range: -40ºF to 150ºF IP rating: IP21 Construction: Material: aluminum Dimensions and Weight: Dimensions: 14-5/16" tall x 10-3/16" wide x 8-5/8" deep Weight: 40 lbs Warranty: 5-Year warranty
When limited shore power can't keep up, this unit adds battery support through PowerAssist to carry the load. Built for 48V systems with low 11 watt idle draw, it keeps essential loads running without wasting stored power.It pairs that load support with a 50 amp AC input and 2,400 watts of continuous output power at 77ºF with 5,500 watts of peak power. In real use, that gives you more room to run real household loads when incoming AC power is the bottleneck.
When a microwave would trip a weak hookup, this unit adds battery power through PowerAssist to carry the load. Built for 24V systems, it keeps appliances running while matching higher-voltage battery setups without rework.It pairs that load support with a 50 amp AC input and 2,400 watts of continuous output power at 77ºF with 5,500 watts of peak power. In real use, that gives you more room to run real household loads when incoming AC power is the bottleneck.
Running a 50 amp coach on battery can leave one leg dead or let 240V loads drain the bank fast. This inverter charger powers both output lines with 120V off-grid and blocks 240V loads without split phase input, so critical circuits stay on.Keeps Critical Loads Running During Outages: Main output transfers in under 18 milliseconds on L1. Runs High-Demand Appliances Reliably: 2,400 watt continuous and 5,500 watt surge support startup loads. Features to know about Keeps Both Legs Powered Off-Grid Losing one leg in a 50 amp coach can knock out outlets and create workarounds you shouldn't need.
300-Amp DC-rated, Class T inverter fuse protects your equipment during power use. Slow blow functionality utilizes a time-delay feature to withstand surge current. ... Features: 300-Amp DC-rated, Class T fuse protects your equipment during power use Slow blow functionality utilizes a time-delay feature to withstand surge current and ensure equipment works properly Polycarbonate block with protective transparent cover houses the fuse Insulated polyester reinforced construction Easy installation with included hardware Includes stainless steel studs and optional universal terminal lugs Connects to the positive terminal on your inverter and battery with battery cable (sold separately) Made in the USA Specs: Application: 12-volt, 24-volt, 32-volt, or 48-volt inverter battery systems Works with: 2,000-watt (12 volt) 2,500-watt (12 volt) 4,000-watt (24 volt) Amp rating: 300 ampsFuse type: Class T Interrupt rating: 50,000 amps DC rating: 160 VDC Dimensions: 7" long x 2" wide x 2-3/8" tall Weight: 0.9 lbs
Filters
