Telescoping wrench includes 2 reversible sockets that will fit trailer wheel lug nuts with diameters of 13/16", 7/8" or 17-mm to 19-mm. Durable chrome plating is corrosion resistant.Features: Socket wrench is used to turn lug nuts Angled design and telescoping handle offer excellent leverage Reversible sockets fit 13/16", 7/8" and 17-mm to 19-mm outer diameter lug nuts
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to ditch brackets on your vehicle's naked roof. Compatible with many Rhino-Rack accessories. your vehicle's roof. These brackets create permanent fixed mounting points where you can bolt Quick Mount legs. Then, attach the spacer blocks to establish a level surface for the platform. The bars
Stop fighting with stubborn hand cranks. This manual jack with drill adapter lets you hitch up faster, so you can spend less time sweating in the driveway and more time tackling projects or meeting friends at the campsite. drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3
1/2" Locking hitch pin secures a 1-1/4" or 1-1/4" and 2" Swagman rack to your trailer hitch receiver. Threaded pin pulls the receiver bar tight to one side of the hitch to prevent movement during travel. locking hitch Inside width (span): 4-3/8" 19mmBolt head 12 UNC coarse thread Fits: All Swagman 1-1/4" or 1-1/4" and 2" hitch bike racks: S63360, S63365, S63380, S63400, S63410, S64650
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Grease fitting allows for easy lubrication. Weld-on installation with metal surfaces. dimensions: 10-1/4" long x 1-1/2" thick Overall diameter: 1-1/8" Pin diameter: 3/4" (19mm)
Heavy-duty steel hinge with brass bushing provides a support point for mounting a metal door or gate. Weld-on installation with metal surfaces. Overall diameter: 1-1/8" Pin diameter: 3/4" (19mm)
This hitch lock lets you secure your Kuat Transfer to your 1-1/4" or 2" trailer hitch receiver. Threaded design helps to reduce movement and noise of the rack in your hitch. Not compatible with Transfer V2. manufactured before 2021 Not compatible with Transfer V2 Anti-rattle design helps reduce movement and noise of rack in hitch Tighten with 8-mm Allen wrench or 19-mm open box wrench (not included) Washer and lock
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to ditch brackets on your vehicle's naked roof. Compatible with many Rhino-Rack accessories.
Break loose lug nuts easily with this lockable lug wrench. The wrench combines the leverage of an L-shaped wrench and the speed of a 4-way wrench. Sliding T-bar allows socket to move. Includes 2 flip sockets and a 3" extension stored in handle.Specs: SAE: 11/16", 3/4", and 7/8" MM: 17mm, 19mm, 21mm, and 22 mm Dimensions: 20-1/2" long Limited lifetime warranty Features: Socket wrench is used to remove lug nuts Great for
These brackets install in the ditches of your vehicle's naked roof. Ditch brackets provide permanent fixed mounting points for Rhino-Rack RLT600 Quick Mount legs so you can create an aftermarket roof rack. Includes 2 brackets and hardware. included rivets - rivet gun required 2 Brackets and 6 rivets included Specs: Application: Rhino-Rack Quick Mount legs RRRLT600 and RRRLT600H Bracket width: 19mm 5-Year limited warranty
Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.
This stylish and aerodynamic rack lets you carry 1 bike on your roof rack crossbars. The versatile rack works with 9-mm quick-release skewers and 15-mm and 20-mm thru-axle forks. Universal hardware ... into place and re-tighten the bolt. If you have a fat bike with a 15-mm or 20-mm thru-axle skewer, you will need an adapter (sold separately) to mount your bike to the rack. Sliding Rear-Wheel Cradle
This stylish and aerodynamic rack lets you carry 1 bike on your roof rack crossbars. The versatile rack works with 9-mm quick-release skewers and 15-mm and 20-mm thru-axle forks. Universal hardware ... a 20-mm thru-axle fork, simply remove the chrome cylinder and replace it with the included black cylinder. To remove the cylinder, loosen the bolt in the nose of the rack with the included Allen key
This 18" x 9" trailer wheel has 5 on 4-1/2 bolt pattern and a 3.19" pilot diameter. The rustproof aluminum wheel features a 5 V-spoke design in black with a machined silver face. DOT specifications Specs: Rim dimensions: 18" diameter x 9" wide Bolt pattern: 5 on 4-1/2" Offset: +10 mm Wheel bolt size: 1/2"-20 Pilot diameter: 3.19" Load rating: 2,600 lbs
The Batwing 270 Freestanding Awning is your ultimate solution for outdoor coverage, offering over 132 sq ft of shelter. Crafted from premium 280gsm ripstop polycotton fabric, it provides superior durability while being UV resistant and water-tight.Features: The 270 Freestanding Awning is 86" long when packed, and over 19' when deployed. It extends up to 78" from edge of vehicle and wraps around the left and rear of the vehicle
The Batwing 180 Freestanding Awning is your ultimate solution for outdoor coverage, offering over 90 sq ft of shelter. Crafted from premium 280gsm ripstop polycotton fabric, it provides superior durability while being UV resistant and water-tight.Features: The 270 Freestanding Awning is 86" long when packed, and over 19' when deployed. It extends up to 78" from edge of vehicle of the vehicle providing 90 square feet of coverage
The Batwing 270 Freestanding Awning is your ultimate solution for outdoor coverage, offering over 132 sq ft of shelter. Crafted from premium 280gsm ripstop polycotton fabric, it provides superior durability while being UV resistant and water-tight.Features: The 270 Freestanding Awning is 86" long when packed, and over 19' when deployed. It extends up to 78" from edge of vehicle and wraps around the right and rear of the vehicle
Revolutionize the way you load up! These game-changing transition plates let you roll your gear from the ground right onto your trailer floor. Fit most enclosed trailers, making them the perfect upgrade if you're looking to save time and energy.
Revolutionize the way you load up! These game-changing transition plates let you roll your gear from the ground right onto your trailer floor. Fit most enclosed trailers, making them the perfect upgrade if you're looking to save time and energy.
17-1/2" x 6-3/4" Hub-piloted wheel has an 8.7" diameter pilot hole. ±5.59" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Acrylic enamel finish resists damage better than powder coat. Bolt pattern: 8 on 275 mm (8 on 10.83") Lug nut size: 5/8"-18 Wheel capacity: 6,200 lbs Pilot diameter: 8.7" Offset: ±5.59" 2-Year limited warranty Built-In Offset for Dual
17-1/2" x 6-3/4" Hub-piloted wheel has an 8.7" diameter pilot hole. ±5.59" Offset allows wheel to be used as either the inner or outer wheel of a dual-wheel setup. Rust-resistant 3-step powder coat. Valve stem is included. Specs: Rim dimensions: 17-1/2" diameter x 6-3/4" wide Bolt pattern: 8 on 275 mm (8 on 10.83") Lug nut size: 5/8"-18 Wheel capacity: 5,675 lbs Pilot diameter: 8.7" Offset
17-1/2" x 6-3/4" Hub-piloted wheel has an 8.7" pilot hole and 5.59" offset. Can be used as either the inner or outer wheel of a dual-wheel setup. Rust-resistant powder coat on both sides of wheel. installation Metal valve stem is sold separately Wheel meets SAE J1204 standards Specs: Rim dimensions: 17-1/2" diameter x 6-3/4" wide Bolt pattern: 8 on 275 mm (8 on 10.83") Lug nut size
Filters
