Result: e2rb0710

Hey Ben, thanks for reaching out! We actually have the Replacement Spacer Rivet #EQ90-03-9105 which is the Equal-i-zer brand, but we found it to be the same as the Fastway Rivet 92-04-9650 so we decided just to carry one of them. Did your rivets…

The bracket #EQ95-01-5600 is just a replacement for Equal-i-zer WDS rated from 6,000 lbs ot 14,000 lbs, so if you have any of those systems it'll work. I'm assuming you have the 6K Equal-i-zer Weight Distribution System w/ 4-Point Sway…

I have attached photos showing the dimensions of the Replacement Sway-Control Bracket #EQ95-01-5600. The larger, L-shaped bracket measures 10 inches long x 2 inches wide and the smaller brackets measure 8-1/4 inches long x 1-1/2 inches wide. These…

With your trailer you should have been sold a Fastway e2 Weight Distribution #FA92-00-1000 as it is for trailers with a tongue weight of 600-1,000lbs. The dealer should have accounted for the additional weight of the battery and propane plus…

Tongue weight is typically between 10% -15% of your trailer's total weight so with the 800 lbs spring bars you're already over their capacity. I recommend upgrading to the 1,000 lbs Round Spring Bar for Fastway e2 Weight Distribution Systems…

If you wanted to change your weight distribution system to lower the tongue weight range from 1,000 to 600 you would just need to replace your bars with the part #FA94-02-0699. These bars will fit the head of your system.

It is possible to upgrade your Fastway e2 Round bar weight distribution system by using higher rated spring bars. I assume you have the 600 lb system, part #FA92-00-0600, so you can upgrade to a 800 lb tongue weight or 1,000 lb tongue weight system.…

The easiest way to install a brake controller on the 2020 Ram 1500 is to use a wireless brake controller that plugs into the 7-way, Curt Echo Brake Controller part #C51180. The Curt Echo brake controller simply plugs in line with the 7-way and only…

The Fastway e2 weight distribution (WD) 8,000 lb and 10,000 lb systems do use the same head units so you can easily use the 1,000 lb Trunnion Bars #FA92-01-1099 or 2 of the Rounds Bar #FA94-02-1099 with your current setup depending on which you have.…

Absolutely, the Fastway e2 weight distribution systems are designed so that the spring bars can be replaced or upgraded to a higher weight capacity without additional modifications. For the 800 lbs. spring bars you will want the Replacement Trunnion…

You would want to upgrade your spring bars as your tongue weight is most likely higher than what your current system is rated for. For that all you need is the #FA92-01-1099 and you'd be set. This will replace your current spring bars with ones…

For your 1987 Chevrolet C/K Series Pickup the B and W hitch part #BWHDRH25198 that you referenced would work really great if you had a deep drop bumper but if instead you had a standard bumper you'd want the standard version of this hitch…