Hi Mark, I totally get how frustrating that must be especially after choosing the Maverick for flat towing. I did find some updated info I can share with you, but the best way to stay on top of things for your specific vehicle is to use Ford’s…
I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…
I reached out to the manufacturer he Deluxe Compartment Door Thumb Latch - 1-3/8" part #37200145 is designed to work with 3/4" holes the locking blades are 1 1/2" long and can be set to depths of 1 1/4", 1 3/8" and 1…
I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less style…
A lot of trailer tire blowouts are a result of heat build up that causes the tire to fail. There are several things that can cause too much heat to build up but the main two most likely suspects are overloading the trailer and/or under inflated…
Yes, you can install the Yakima RoadShower #Y89VR on the underside of the OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 for your 2022 Ram 1500. I confirmed this with my contact at Yakima.
The Yakima EXO Swing Away Cargo Carrier part #Y72VR only swings out to the passenger side which is by design because it's away from traffic. That said, I do have an option for you that will swing out to the driver side but it would be a…
We can piece together a Malone Lowbed trailer by first starting with the part #MPG464-LB and then a single bunk kit part #MPG561 and then the spare kit part #MPG465 and you'd be set. There isn't a kit with just the parts you are looking for…
The retractable tongue kit part #MPG494 that you referenced works perfectly fine with the Malone Microsport Lowbed part #MAL25FR that you also referenced.
The correct Roadmaster Reflex Steering Stabilizer with Mounting Brackets for your 2008 Ford E-350 is part #RM-RBK24-RSSC if you have the V10 engine or part #RM-RBK2-RSSC if you have the V8 engine. The only difference between the red and blue model is…
Hey Al, so we do this fun thing where we change the manufacturer part numbers and it can create confusion. But bottom line is our part number #T76FR is the same as Timbrens JRGD which does fit your 2020 Jeep Gladiator so this is correct fit. Since…
Filters
