1998  x   >   !Firebird  x   >   Tacoma  x   >  

Will this be alright on a 1998 4 cylinder Tacoma. Will having the hitch on while driving without the trailer effect the gas mileage? How much does this exactly weigh? | Minus the packaging, the Curt Class III hitch, part # 13013 will weigh a...

the truck rear suspension is needs help truck is lower in back than it is in front and also will not take much weight without bottoming out ,what is best product for me | We have suspension enhancement products that are confirmed to fit your...

I recently bought a 1998 Toyota Tacoma standard cab I have the rails and the cross beams for a tonneau cover its a snap set up I was wondering what the part number is and price for replacement tarp for it | If you have the Extang BlackMax Soft...

Will the #33-0905 westin ultimate bull bar fit my 1998 2wd Toyota Tacoma pickup with a extra cab? Thank you | Yes, the Westin Ultimate Bull Bar with Skid Plate # 33-0905 that you referenced has been confirmed to fit all model 1998 Toyota Tacomas...

Hi, Are these Westin chrome tube steps for the 98 Tacoma Xtra Cab 2 door? And if so, what is the length measurement? Look forward to hearing from you! | Westin tube steps # 25-0750 are designed to fit 1994 to 2004 Toyota Tacoma Xtracab models,...

Hello! I have a 1998 Toyota Tacoma SR5 4X4 extended cab. Is this kit number # TTORTAC4A. Will this fit my pickup to help when I put a load of firewood in the back. I loaded it up yesterday and it was really loaded more than I wanted. Since...

Will this fit a 2005 aspen f32 5th wheel | The Landing Gear Set w/ Handle # RVLG-8HDL can fit your 2005 Aspen, but you may have to cut off and weld on new mounting brackets to the frame if the weld stop spacing differs from your current setup....

WHY DOES YOUR SEARCH GIVE ME MOUNTS FOR 2001 SEQUOIA AND TUNDRA WHEN I SEARCH FOR 1998 TACOMA SHOULD BE SNOW BEAR PART # 397-025 | I ran your 1998 Toyota Tacoma through our snow plow mount fit guide and the listed plow mount kit we have...

Does product ETBC7 include a hot wire from the tow vehicle to charge the RVs battery? Lights, brakes, signals are all mentioned, but nothing about battery charging. I have a 98 Tacoma SR5 4WD 3.4L manual. Torn between Derale oil coolers D15405...

what is included in the mounting kit? does this product work with stock rear bumper brackets? for a 1998 toyota tacoma thanks | Included in this kit are 2 brakcets (driver and passenger), 8 lock washers, 8 flat washers, 2 12MM bolts, 6 1/2-13...

Wondering if this would be the best fit for my taco. Largest load Ive carried thus far in bed is my atv. It is an extended bed. Thanks | The Super Springs Custom Suspension Stabilizer and Sway-Control Kit you referenced, part # SSA7, is a...

Dealer installed harness and hitch worked for over 20 years on both 1978 Toyota and 1998 Toyota Tacoma. Recently stopped working. Read through r trouble shooting information. Checked out trailer for shorts hooked up battery charger and voltage...

On a 1998 Toyota Tacoma 2.4 SR5 where do I connect the wire to a ignition controlled switch | The Flex-a-lite Adjustable Temperature Controller for Electric Fan part # FLX31147 as you mentioned will need to be powered via a keyed circuit which...

Im interested in purchasing 3 products, but need to know if theyre compatible with each other. I want to use BWTS10043B with two different trucks, each towing two different trailers. The pin hole on my Tacoma is 4.25inch from the rear/outer...

I have a 1998 Toyota Tacoma with factory plastic tailgate cover. There is approximately 1.5inch of available flat space for mounting the bracket on each side without altering the cover or interfering with gate closure. Can you give the maximum...

All the wiring diagrams only deal with the 4 wires for lighting. In addition, I need to run power to my vehicle to unlock the steering as well as the brake signal. How many wires are in the cable? 4? 6? Cable connector mount, vehicle...

Is it possible to order multiple locks that are identical so they may be opened with the same key? | The manual Pop & Lock Custom Tailgate Lock # PAL5100 is only available with unique keys and from what I'm seeing there aren't any options that...

Hi, Im thinking about installing one of these suspension units on my truck to help with the rear end sitting down and preventing sway while towing a camper see photo. Can you confirm this is the correct unit for my pickup? I have a 98 Toyota...

when installing the kit on a truck with a 3 in body lift, not suspension, do I still need the risers? | No. Because a body lift does not change the suspension height at all-more specifically the distance from the frame to the axle- you won't...

How does this attach to the truck? I do not see fasteners. | The base rails of the TracRac Ladder Rack part # TH43001XT-600 that you referenced attach to the truck bed by securing into the stake pockets of the truck's bed. Check out the picture...

Hello: I purchased a Curt converter harness from you some time ago and am having some problems Id love your opinion on. The problems were occuring w/o trailer attached. I unplugged the converter harness and everything is now working as expected...

does any of your tonneau covers lockable? | Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you...

Sorry if this information is on your web site but I cant find it. Im looking for the height of the vertical center post as measured from the wheel trays. This is for the Yakima OnRamp Bike Rack Y36FR. Thank you, | The center mast on the Yakima...

Will this fit a 98 Tacoma? | I have a solution for you, but I checked with Rola and the Rola 59742 that you referenced has not been confirmed to fit your 1998 Toyota Tacoma. For a similar rack that would fit your truck you would want the Yakima...