Summer Starts Here - Save up to 70%
Alternative Tailgate Options for a 1977 Ford F-100
I have a Ford f-100 will this tailgate fit my truck ? | I do have an option for you but Stromberg Carlson does not offer a Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate for your 1977 Ford F-100. The only option we have have for you...
What Hitch will Work Best on my 1982 Ford F-250 with an Aftermarket 38 Gallon Fuel Tank
I have a 1982 F250 with a 38-gallon after-market rear gas tank - it hangs down below the frame rails, so any hitch that attaches to the frame rails must not encroach on this area between the frame rails in the vicinity of the tank. It looks...
Recommended Trailer Hitch Receiver For A 1982 Ford F-350 DRW With Deep Bumper
Hi, Everything Ive read says that the c15511 or c15317 is the hitch I need 1982 F350 dually because I have a bumper, but my frame on center is 35 5/8. What do you recommend? | Since your 1982 Ford F-350 DRW has the Deep Bumper I recommend the...
Is the LCD Display on the Tekonsha Prodigy P3 Included in the Warranty
Does the lifetime warranty cover the LCD display going bad and bleeding in from the sides? Who covers the warranty, the seller or the mfgr? Thanks, | I spoke to my contact at Tekonsha and they said the LCD display on the Tekonsha Prodigy P3...
Hitch, Brake Controller and 7-Way Trailer Connector for 1966 Ford F-250
Hello, Im needing recommendations for adding brake controller and hitch to 1966 Ford F250, Im going to be towing a 2-horse trailer that weighs 3200 lbs and tongue weight 200. It currently has 7 pin on it that is frayed and I need to replace...
How Much Tire Clearance is Needed for Timbren Rear Suspension Enhancement
I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...
Recommended Toolbox For A 1979 Ford F-150 With A Pace Edwards Full-Metal Jackrabbit Tonneau Cover
Just looking for tool box options that fit. | The average bedrail height for Ford F-150's is approximately 21", so going off of that measurement and allowing for your Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FEF1290...
Recommended 5th Wheel Hitch or Gooseneck Hitch Compatible with 1962 Ford Truck with 34 Inch Frame
i have a 62 f350 dually 34 inch wide frame. lookin to mount rbw lil rocker 15k on this beast pins measure 20.75inch on center on hitch but i have no mount any ideas....it is a flatbed but can it can be removed for strickly tow rig.... | For...
Troubleshooting Brake Controller When Manual Override Does Not Work
Hi my brake controller works when I hit the pedal but not when I hit the manual switch it works fine when the trailer is plugged in but when its not it reads a short circuit on the brake controller but again works fine when trailer is plugged...
Will Access TonnoSport Fit a 1979 Ford F-100 Fleet Side Pickup
I want to put this cover on my 1979 F100 Short bed Fleet side pickup truck. The dimension of my truck bed is 80 3/8 inches long and 65 1/4 inches wide. Will this bed fit my truck? | The Access TonnoSport Soft, Roll-Up Tonneau Cover # A22010029...
Diamond Step Chrome Rear Bumper For 1977 Ford F-100
Hi I have a 1977 ford f100 I would like a diamond plate chrome rear bumper for what would fit and what installation kit would I need? Thank you. | Hey there Jason; for your 1977 Ford F-100 we do have a diamond step chrome rear bumper that fits,...
Side to Side Measurements for B&W Class V Trailer Hitch # BWHDRH25122
Hello, What is the width including mounting tabs and what is the distance between the bolts, center to center, frame rail to frame rail? I need a class 5 hitch for a 1967 F350 dump truck. If the width on this doesnt work, do you have a recommendation? Thank...
Black Westin Fey Diamondstep Replacement Rear Bumper for 1978 Ford F-100
Hello. I have a 1978 Ford F-100. Id like to buy the Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel - 20009. Could you confirm that this bumper will fit my truck? If not, do you have a similar black bumper that would work?...
Replacement Rear Bumper for a 1971 Ford F-100
Will the sure fit xlt chrome bumper fit? Not sure the difference between xlt and standard which one is better for the 71 f100 | The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better...
Does Curt Trailer Hitch # 13028 Fit 1978 Ford F-150
I have 1978 f150 4x4 long wheel base pickup. Need to know what hitch yall offer for this truck. Thanks | For your 1978 Ford F-150 we have the Curt hitch part # 13028 that you referenced as a confirmed fit for your truck. |
Dimensions of Hub Arms for a Rock Tamers Mudflap
How long is the Hub Arm for Rock Tamers Heavy-Duty, Adjustable Mud Flap System ?? | I went and grabbed a # ERT039 from our warehouse and found that from the very top to the very bottom it measures 7-1/4 inches and from the center of the holes...
Class V Trailer Hitch for 1971 Ford F-100 Pickup with Standard Rear Bumper
Need a class V hitch for a 1971 Ford F100 with a standard rear bumper and not have to remove the spare tire! Any help? Thanks | B & W offers a 2-inch trailer hitch for your 1971 Ford F-100 pickup with standard rear bumper. However, to install...
Replacement Rear Bumper Options For A 1976 Ford F-250
Looking for rear bumper mounting kit for a 1976 Ford f250 4x4 has a narrow frame 34 | Yes, we have the following style options available for your 1976 Ford F-250 with brackets compatible with your 34" frame: Westin Fey Surestep Deluxe XLT Rear...
Can the Aluminum J-Channel Trim for Enclosed Trailers Bend
Is this soft j-rail and easily formable | The J-Channel Trim for Enclosed Trailer part # 362415-955 is made of aluminium which is a very soft metal so yes it could be bent or conformed to a certain shape if needed. However, if you need to make...
7 Pole Wiring Repair for 1991 Ford F-250 Diesel Truck
I need to fix my truck wiring for the 7-pole connector on the truck. The harness to the truck wiring needs to be replaced. It doesnt look like the typcial T-harness you prescribe for the 1991 F250 will work since its a 7-pole trailer connector....
Trailer Hitch and Wiring for 1970 Ford F-250
Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...
Troubleshooting Lighting Problems on a 1974 Ford Truck
The install went perfect but on my 74 Ford Truck when I press the brake the turn signal stops. and when the head lights are on the turn signals wont work. What can I do? | I recommend checking the grounding wire on the Hopkins Plug-In Simple...
Recommended Universal 7-Way Wiring Harness for a 1983 Ford F-250
I have an old 83 f250. It has a 7 pin trailer connector on it. The wiring harness behind the connector that sits in the middle of the tail lights to front of the truck is corroded and in need of replacement. I am hoping you have access to this...
Installation of 7-Way RV Connector on 1981 Ford F-250
I have a 1981 Ford F250 and need to install a 7-pole trailer connector. What product should I buy? | If your 1981 Ford F-250 already has a 4-way connector installed simply add etrailer"s Universal Installation Kit for Trailer Brake Controller,...
Filter Your Search
Contact and Help