Recommended Hitch and Bike Rack for a 2012 Chrysler 200 Convertible
I have a 2012 Chrysler 200 convertible and recently purchased an Evelo Atlas ebike pictured here: https://evelo.com/products/atlas. The bike has 27.5inch x 2.8inch tires, a 46inch wheelbase, a crossbar and fenders in both the front and rear....
Parts Needed to Flat Tow 2012 Chrysler 200 Convertible
will this work on a 2012 Chrysler 200 convertible | I did check with Roadmaster and the Roadmaster EZ4 Base Plate Kit # RM-52297-4 that you referenced is only a fit for the sedan version of the Chrysler 200. It will not work with the 200 convertible....
Trailer Hitch that is Mostly Hidden for a 2015 Chrysler 200
Do you have any pictures available of a hitch installed on a 2015 chrysler 200. I am looking to install one to be used very rarely and would like for it to be hidden as much as possible. | I included an image for the instructions for Draw-Tite...
How Much of Curt Hitch part # C11133 is Visible Installed on 2011 Chrysler 200
Is the body of the hitch hidden behind the bumper so that all you see is the actual hitch? This is on a 2011 Chrysler 200 Convertible. | When the Curt hitch part # C11133 is installed on a 2011 Chrysler 200 convertible the only portion of the...
Trunk Mount Bike Carrier for a 2015 Chrysler 200s
Which trunk mount rake would you recommend for a 2015 Chrysler 200s? Either capacity of 2 or 3 bikes. Thank you very much. | If you are looking for a good entry-level bike carrier the Thule Passage 3, # TH911XT is a good choice. This is a basic...
Threaded Locking Hitch Pin for Curt Cargo Carrier 18145
Any Idea what Threaded Locking Pin will work with my new Curt Cargo Carrier? The Threaded pin they send with the carrier does not lock and the threaded lock pin I have for another carrier is a different size thread and will not work with the...
Troubleshooting Carriage Bolt that Keeps Turning When Installing Draw Tite 24919
I just installed a Draw Tite hitch on my 2014 Chrysler 200 with twin exhaust pipes, when I tried to tighten one of the bolts the bolt just kept turning with the nut once it was tightened. So I could not torque it. BTW Its much harder to put...
Replacement Key for MOPAR Roof Rack with Lock Number E021
Looking for a replacement key for the mopar cross bar. The number on the lock is E021. Also will these fit my new car Chrysler 200 2013. Thanks | The replacement key you need is probably the Thule key # THKEYN021. If you want to send...
Recommended Trailer Hitch Receiver, Ball Mount and Wiring For a 2013 Chrysler 200
Im using the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4inch # C11133 purchased from etrailer.com with my 2013 Chrysler 200. Im hoping to pull a small trailer. Specifically the Uhaul 4x7 Utility Trailer with an empty weight of...
Recommended Ball Mount To Get 6" Of Rise For a 2015 Chrysler 200 Class I, 1-1/4" Receiver
Ball mount with six inch rise for 1 1/4 inch shank | Currently our Curt Drawbar # C45028 has the most rise available for a 1-1/4" Class I receiver like that you would have on your 2015 Chrysler 200. The rise is 5-3/8" from the receiver. To...
Can Replacement Plate/Fin Cooler Core D15851 be Used on Older Derale Cooler with Welded Inlet/Outlet
Thx for your response, however I want to know if I can just replace the coil and not the whole cooler. My existing cooler was a welded in/out connection and not a threaded connection. Thx. | According to my contact at Derale, their replacement...
Does Draw Tite Hitch # 24871 Fit 2012 Chrysler 200 with Dual Exhaust
will the draw tite hitch#24871 fit a 2012 Chrysler 200 with dual rear exhaust? the mopar hitch claims not to fit | We've spoken with Draw Tite before about their # 24871 hitch and it fits just fine on versions of your 2012 Chrysler 200 that...
Parts to Tow a Small Trailer with a 2015 Chrysler 200
Hi, Is it possible to tow a jet ski with a Chrysler 200 s, yr:2015. | We do have everything you need to tow a jet ski with your 2015 Chrysler 200. I recommend using the Curt Trailer Hitch # C11403 along with the Curt T-Connector Wiring # C56242....
Fitting A Trailer Hitch Receiver To A 2012 Chrysler 200
I am considering a receiver for my 2012 Chrysler 200 sedan. Thanks. | I recommend the Draw-Tite Sport Class I, part # 24871 as a good pick to support the bike rack. The Draw-Tite Sport doesn't require any trimming or drilling for installation,...
How Does the Rightline Gear Sport 2 Roof Cargo Bag Attach to a Vehicle without a Roof Rack
can this bag set on the roof is there straps that go thru the doors help | Rightline Gear Sport 2 bag # RL100S20 was meant to sit on the roof of a vehicle. In order to secure it to the roof on a vehicle that does not have any sort of roof rack...
Recommended Trailer Hitch Cargo Carrier For Pop-Up Tent
Can you recommend a product that I can attached a hitch receiver for my 2015 Chrysler 200 to use a small pop up tent. | There is not a hitch mounting application for a tent if that is what you are referring to. We have some tents that attach...
Is Light Kit Needed For 2015 Chrysler 200 When Using Tow Dolly
I am going to tow my 2015 chrysler200 on a tow dolly. can I tap into my tail lights or do I need a diode kit like part number 38955? what would happen if I need the kit and didnt use it? | So when using a tow dolly for your 2015 Chrysler 200,...
Recommended Hitch Bike Rack for 2013 Chrysler 200 Convertible That Will Clear Trunk
Hello, Is it possible to open and close my 2013 Chrysler 200 convertible hard top with the bike rack and bikes mounted? If not, can you recommend another one that can do it? Just for two bikes. Thank you! | The Swagman XTC-2 2-Bike Platform...
Are Bolt Leaders Included with Hardware for Draw-Tite Sportframe Trailer Hitch Receiver
does the install kit come with the 4 bolt leaders for going through the frame or so they need to be purchased separately? | The Draw-Tite Sportframe Trailer Hitch Receiver # 24919 includes all of the necessary hardware for installation including...
Carrying Snowboards on a Trailer Hitch or Roof Rack for a 2012 Chrysler 200
I was contemplating the snowboard attachment for my Chrysler 200. I would need the hith, but I am not sure what bike rack I would have to purchase. I noticed tho profile on the video was quite high which is okay for an SUV but would be akward...
What are the Correct Settings for the Thule Passage Trunk Mount Bike Rack on a 2011 Chrysler 200
I recently ordered a Thule TH910XT Bike Carrier for my 11 Chrysler 200 Touring and would like to know what settings are recommended for a Chrysler 200 to make the bike carrier more secure, especially when bikes are mounted on the carrier? |...
Does the Draw-Tite Receiver 24919 Come with the Hardware for a 2015 Chrysler 200
Iwant to make sure that this piece come in a box, and with all its hadware, the item# is24919,thank you. | Yes, all of our trailer hitch receivers, like Draw-Tite # 24919 that you reference, come in a box and with the hardware included. This...
Compatibility of Curt Class I Hitch # C11133 with Dual Exhaust Model 2013 Chrysler 200 Limited
The 2013 Chrysler 200 Limited has twin exhaust pipes. Is this a problem with the installation of this hitch? | The installation instructions for the Curt Class I receiver # C11133 specifically mention the procedure for installing the hitch...
Routing the Power Wire for Trailer Wiring Harness on a 2014 Chrysler 200
How do we get the main wiring that runs to the battery for power. Is there a pass through area.I saw a reply from another question about this product I believe where you running the power line along with the brake lines under the vehicle. My...
Filter Your Search
Contact and Help