Ford  x   >   Escape  x   >   !Canine Covers  x   >   !Transit  x   >   F-250 and F-350 Heavy Duty  x   >  

Dear etrailer does the drawtite class two hitch for the 2011 Escape Hybrid include the wiring attachements for trailer lights? or is this an additional kit? | The Draw-Tite Class II Trailer Hitch, item # 36501, for the 2011 Ford Escape does...

Do I Need a Base Plate Kit on My 2002 Ford Escape for it To Be Towed Behind a Tow Vehicle | Yes, if you wanted to tow a 2002 Ford Escape with a Tow Ready Adjustable Tow Bar, 5,000 lbs, part # 63180, you would need a base plate like the Roadmaster...

I just finished putting together my Demco Kar Kaddy SS that I purchased from you. today on its maiden voyage, I lost one taillight and grommet. You have a listing for the replacement taillight but do not list a replacement for the grommet....

Ive finished installing this hitch and all went smoothly. However, I noticed that it comes with the silver 7/16inch carriage bolt, block, nut, etc., but also with black coated bolts/nuts that appear larger. I used the silver 7/16inch for everything...

We have a 2019 Sunseeker 27’ with a Falcon 2 Roadmaster Tow package. Recently bought a 2020 Ford Escape SUV Hybrid to flat tow. What parts do I need for the car and steps necessary for towing ? Thank you. | For a Roadmaster base plate to use...

Looking for a set up to attach to my Ford escape receiver hitch with a combo 4 pull or with a 7 pull by its self with an adapter to down to 4 if needed. I currently have the Drawtite receiver 2 inch | The best trailer wiring setup for what...

I have a 2004 Kendon motorcycle trailer. I need new seals and bearings. The bearing number is L44649, which I see you have, bu the seal number from Kendon is 125255UC. Do you have a cross referene to this seal or do I need to get it from Kendon? Thank...

I have a 2014 Ford Escape Titanium that has a factory tow package with a 4-pin connector. I was considering a dual connector socket to accommodate both my 7-pin camper camper and my 4-pin utility trailer. It looks like the Hopkins HM40975...

2018 ford escape hitch draw-tite code 75758 fits below the muffler. my question is will the muffler and tailpipes be able to be replaced without removing this hitch. | The Draw-Tite Trailer Hitch Receiver # 75758 does install with the hitch...

I have a 2017 Ford Escape and need a trunk mounted 3 bike rack. I see that the Yakima Y02633 is what you feature. How does it attached to the trunk when there is no lip on the botton and top of the trunk. Does it attach somehow inside when...

Hey champs! Ive got a 2017 Ford Escape Titanium and it seems that none of the trunk bike racks fit the Titanium. Just curious what the difference is between the other escape models and the Titanium that makes the trunk bike racks not fit?...

trailer hitch, for 2013 ford escape, cost to install,already got bike rack | For your 2013 Ford Escape, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75758. This is an easy install and will give...

I have a 2011 Ford Escape AWD. I know I dont need chains in most conditions but CA law says I need to have some on me, just in case. Is PW2029C what I need? | The Glacier Cable Snow Tire Chains, # PW2029C, would be a good choice for occaisional...

looking for a trailer hitch for a 2014 ford escape. It will only be used for a bike rack - probably 2 bikes. I have no idea what I need | Since you will only be using the trailer hitch to carry 2 bikes I recommend going with a Class II trailer...

How does the rack attach at the top ? | I do have a solution for you, but the Thule Passage 2, # TH9010XT, is not a fit for your 2015 Ford Escape. Instead check out the Yakima HangOut 3 Bike Rack, # Y02638. This rack is a trunk mounted bike...

Hello, I have a new 2021 Ford Escape Hybrid that lists as tired: .225/60R18 100H A/S BSW TIRES. Can I use these cables for them? Titan Chain Cable Snow Tire Chains - Ladder Pattern - Steel Rollers - 1 Pair Item # TC1046 | We have one set of...

Will Not Fit E-Series, Clubwagon, Econoline, Windstar Vans, Ranger with Black Sport Mirrors or 97 F-250 and F-350 Heavy Duty with Old Body Style black mirror with chrome back I have a 1997 F350 with the old style mirrors listed above. Models...

I took the classII hitch off my 2008 Escape and now want to install it on my new 2011 Escape. I need the installation instructions and possibly some hints as to how to get the carriage bolts and plates in to position in the frame channel for...

We have a new 2017 Ford Escape with Factory Tow Package, but it only has a four pin plug. Id like to add an electronic brake controller, but you dont list any kits for a 2017 model year. Any recommendations? | I suggest the Prodigy P3 # 90195...

Purchased T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Code: 118426 a couple of years ago for 2006 Ford Escape. Last summer the lights stopped working on trailer. Tested trailer on another truck and it worked fine. Checked...

Looking for hitch and bike rack for 2013 Ford Escape SEL with lift gate sensor. We have 2 26inch cruisers. | For your 2013 Ford Escape SEL I first recommend the Draw-Tite Trailer Hitch Receiver, part # 75758. This is a Class lll hitch that has...

I would like to inquire about a HITCH and a CARGO CARRIER for a 2014 Ford Escape Titanimum HAS HANDS FREE LIFT GATE. Can you advise me which hitch, I would need and the proper CARRIERS that would work and all assessories needed to fit the carrier...

We would like to carry our two 14 ft kayaks on top of our 2013 Ford Escape. The factory installed cross bars are spaced 28inch apart and cannot be moved further apart. A are the crossbars far enough to safely transport kayaks this long, and...

Can I just purchase the hardware nuts and bolts necessary to install the Class II receiver hitch on a 2014 Ford Escape? | Yes. You can purchase the hardware using part # RHK. You simply enter the manufacturer and the hitch part number and...