Brake Controller For 1993 Dodge Ram Truck
I am installing your wiring kit for a trailer on a 1993 dodge ram d350 and was wondering what brake controller will I need to install with it? Thanks | To add a brake controller to your 1993 Dodge Ram truck, a great option is from Curt: - Curt...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
What Might Cause Outside of Trailer Tires to Wear Out Quickly
Hello there. I have a question regarding my my 22GN trailer. The only right side 2 tires on the front axle wear very fast, in less than 3 month they are done. The outside tire comes to wear out first. I try to put the load even, I dont load...
4-Way Wiring Harness For 1993 Dodge Ram D350 For Brake Controller
I was wondering what is the best way to hook this up if the truck does not have the 4 pin connector already installed. Can I connect the wires in directly without the 4 pin? | You do need a 4-way wiring harness for your 1993 Dodge Ram D350 truck...
Will a Ladder Rack Fit a 1992 Dodge Ram 50
Which pairs of ladder rack will fit my 1992 Dodge Ram 50? the bed width is about 55 inches maybe 54 inches wide. The truck is pretty much the same as a Mitsubishi Mighty Max. | The 1992 Dodge Ram 50 or Mitsubishi Mighty Max (my dad had a Mighty...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Does Westin Replacement Bumper w Custom Install Kit Include Mounting Brackets for 1987 Dodge Ram 50
What does the mounting kit include? The brackets from my old bumper to the car frame are heavily rusted and Im concerned about being able to remove the bolts without cutting them. Does the mounting kit include the brackets to the frame? Thank...
Will the Westin Fey Diamondstep Bumper # 65000 Fit My 1987 Dodge RAM 50?
Is this a bolt on for a 1987 dodge ram 50 ? Thanks | I have a great alternative for you. Unfortunately, the Westin Fey Diamondstep Rear Bumper # 65000 will not fit your 1987 Dodge Ram 50. However, Westin does make a bumper the exact same style...
Could Stromberg Carlson Landing Gear Replace RBW Landing Gear on Fifth Wheel
We have 1998 carri lite that has a RBW front landing gear that has failed. Is it interchangeable with the Stromberg Carlson LG 1 Deluxe Electric Landing Gear? | In order to pick out a direct replacement for the landing gear on your 1998 Carri...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
Options for Replacing Landing Gear that Have 15 inches Between Brackets
The measurement from the bottom of the top bracket to the top of bottom bracket is 15. We are looking for a set of replacement landing jacks that we dont have to remove and re weld existing brackets. | It looks like you will need to have your...
Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Filter Your Search
Contact and Help