Possible Replacement Trailer Taillight for 2018 Starcraft Launch 239 BT
I have a Starcraft 2018 Launch 239 BT and need the driver side left replacement light. Is that part number RVSTB61? | I wasn't able to pull up a decent picture of the rear of your Starcraft 2018 Launch 239 BT but if the light assembly looks...
Recommended Weight Distribution System for 5000 lb Starcraft Launch Travel Trailer
I have a 2013 Toyota Tacoma with tow package capable up to 6500 lbs. Ive pulled boats and other trailers up to approx 1700 lbs with little sway. Just recently purchased a camper with gross vehicle weight of 5000 lbs but actual weight is 3250...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Will Dexter E-Z Flex Suspension Kit Raise or Lower Ride Height
I am wanting to upgrade the equalizers on my trailer. I am wondering if the K71-652-00 kit will stay close to the stock ride height? | The Dexter E-Z Flex Suspension Kit part # K71-652-00 won't change the height of the trailer even if the height...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Will Tongue Weight Change if Using Timbren Silent Ride
Will the tongue weigh change if I install the Timbren Silent Ride #TSR7000T04. | The axle spacing of the Timbren Silent Ride part # TSR7000T04 is the standard 33 inch spacing so the tongue weight would not change at all assuming you installed...
Recommended Replcement RV Stereo
We need a replacement for our stereo. The last one kept trying to run the CD/DVD player even without a disk. So I ripped it out. My wife once another and I am not sure what would be a better choice. I also need the mounting kit. On another note,...
How to Correctly Measure a Cam Lock Cylinder for Replacement
How do I know which keyed cam lock size to get? | The correct way to measure a lock cylinder for length is by the threads. The correct way to measure for width is by the two flat spots. Therefore, based on the photo you attached, you will need...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
PSI Rating for Lionshead Steel Modular Trailer Wheel # LHHA315
what is the pressure rating on the valve stem that comes with it | The PSI rating for the valve stem that comes with the Lionshead Steel Modular Trailer Wheel # LHHA315 is 80 PSI. |
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Filter Your Search
Contact and Help