Result: knobs

I cant seem to find just the knobs. Do you sell them? Ive included a picture of the inside of the knob. | Hello, We have a shower faucet that looks like this item: RV Shower Valve w/ Vacuum...

The knobs themselves are 2-1/4" in diameter and 1-1/2" tall. | how many inches are between the ladder rack knobs that screw into the deck rail. I want to know if my tool box can fit in between the rack when installed in a tundra...

Im looking for replacement knobs for a Rola Haul your might truck rack. Also wondering if knobs from another brand of rack might work. | Im looking for replacement knobs for a Rola Haul your might truck rack....

I own a 2016 Surveyor 251rks travel trailer and one of my shower knobs appears to be stripped. Will these smoked acrylic knobs be appropriate replacements in terms of size and fit? | I own a 2016 Surveyor 251rks...

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

It is designed for systems that have the spout and knob(s) for the water separate. It sounds like you are looking for something like # PF223461. | I like the looks of the 277-000024 but Im puzzled! I can readily see the outlet...

The Rola rack uses four locking knobs on each upright to secure itself inside the rails on your truck. | does the sliding tracrack fit a 2017 tacoma ?does the rear rack slide forward? | I do have options for you but they do...

I havent removed my existing kitchen faucet but know its 8inch between hot and cold faucet knobs so I think this is the one. Does my trailer have 3 holes for everything to be sealed down proper. | Not sure if this faucet will...

Yes, the Ultra Faucets RV Bar Faucet - Dual Knob Handle, # 277-000069 will swivel. | We would like a spout that pivots turns back and forth. Does this spout do that? Thanks | Yes, the Ultra Faucets RV Bar Faucet - Dual Knob...

The shank outlet where the water lines connect to the knob valves is where the differences may be found. | would this work on a 1998 prowler? | The Ultra Faucets Single Handle Diverter, # 277-000024, and other faucets are typically...

The base of the rack could be left on if you wanted to unbolt them from the feet but realistically it would be easier to just remove the feet all together since they install with knobs that don't require tools. | Ill be using...

RV faucets, such as the Patrick Distribution RV Kitchen Faucet # 277-000014 and the many others we have available, will typically use fittings beneath the knobs/handles that are made to be compatible with the hoses that are standard in RVs. |

The plastic connections you see on the underside of the knobs is where you will attach those hoses. Hot water line on the left as you face the sink and cold water on the right. | Does the 277-00014 faucet come with male...

If you want a single-handle unit consider the UltraFaucets # 277-000024. if you prefer to keep the separate knob configuration use # PF213321. | Hello - I am thinking of purchasing this shower head for my 1971 Aristocrat Starliner...

As the factory bed length on your truck is 62", I recommend placing the ladder racks 50" or so apart from one another. The knobs located on the brackets inside the bed rail will loosen to reposition the racks then tighten back down once you have them in their desired location. |

We don't have any way of knowing the dimensions of your faucet or it's mounting space, so you'll need to measure to determine the fit; so long as as the dimensions work out, you can install the faucet you asked about, which is the following part number: - Ultra Faucets RV Bar Faucet - Dual Knob Handle - Black # 277-000069 You'll need to measure to ensure the base fits, and the base on the # 277-000069 measures 6" wide x 2" deep and is a 2-hole installation with 4" between the inlets. |

Once the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is installed in the bed of your Toyota Tundra it will be easy to remove by loosening the the 8 knobs, and sliding the racks out of your deck rail system. | I’m...

It will also come with come with sliding load stops that can easily be loosened by turning the hand knobs and slid around to fit your needs. I've attached a short review video below that will let you get a better look at this ladder rack and decide if this will meet your needs. |

When you want to remove it, you can leave the base on and detach the rest, but it might be easier for you to remove the whole rack by loosening the knobs and sliding it out of the bed rails. The rack weighs 43.7 pounds, so the ease of removal really depends on if you're comfortable handling that amount of weight. |

The faucet with the dual knob handle has dimensions of 10-1/4" wide x 6-1/2" tall x 9-1/4" deep and measures 8" from the mounting points to the aerator. | I’m looking for a faucet that is low profile for my Hallmark pop up...

This is confirmed to fit your truck and while it doesn't have quite the adjustability of the TracRac SR units it does use a simple clamp-on installation with locking knobs that allow for easy removal. This means you will be able to easily loosen the rear uprights so you can move them forward or back on the bed rails to provide different crossbar spreads on the ladder rack. |

Then there is a fastening knob that fits into the top of those studs within the rail feet as part of the foot assembly. | I bought this product for our 2013 Hyundai Accent 5 Door Hatchback. The product shipped and arrived,...

Another option is to use Rola ladder rack # 59799 which also fits the 2017 Toyota Tacoma with Deck Rail system. This rack features 2 knobs per upright and if you were to loosen them you could push that section of the ladder rack forward or back along the Deck Rail tracks as needed. |

This rack will not require any drilling to install in your '18 Tacoma; instead it secures directly into your rail system with T-bolts and clamp knobs. This rack also weighs just over 40 lbs, making it easy to handle during the installation, but is made out of anodized aluminum which is corrosion-resistant and strong enough to give the rack an 800 lb carrying capacity. |