Result: knobs

Then reinstall the knob and secure the cover. He said you will want to do this on both sides of the bed. | front corner wants to raise up in wind . is there an extra clamp you can put on that corner? 2018 Chevy Colorado |...

The main unit mounts behind the dash so only the control knob is visible. The knob controls the brake output and also acts as the manual override. | I have a 2004 F350 single cab long bed 4x4, I have a 4 inch...

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Custom Wiring Adapter # 3020-S will give you what you want - a brake controller that is completely out of your way so there is no bulky unit underneath your dash. The Tow-Pro's knob will allow you to install the knob anywhere you like which makes the unit extremely convenient. |

If the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it or it is some how binding up to the shaft of the threads. |

Hey Thomas, the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it, or it is somehow binding up to the shaft of the threads. |

When it is time to remove this tonneau cover all you have to do is the following: fold the tonneau cover, slide the clamps toward the center of the truck bed, and undo the torque knobs at the bulkhead of the truck bed. It weighs just 35 lbs, so it is not particularly heavy. |

At the top of the page the photos show a plastic latch and knob adjustor for the tenion , and at the bottom pictures it shows a metal latch with an automatic spring adjustor ? | Good morning, I am going to buy a tonnaeu cover...

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

This will have one of the cleanest looks once installed as only the adjustment/manual override knob will be visible. So no box to hit your knee on. | I am looking to set up my new 2022 Ram 3500 long bed, with the factory pucks,...

The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob. Check out the picture I attached below. A customer did this install on a 2022 Frontier and it blends in well with the factory switches. |