Result: knobs

This is with the power knob all the way clockwise. Thanks | My green light looks like its on with trailer disconnected but when my trailer is connected the green light is much brighter. Also, I was trying to adjust my level...

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

Now, the controller will only activate when I use the Manual Slide Knob. My truck came with a tow package. I traced the red wire to the connector that connects into the trucks wiring harness and cannot find any loose wires....

You can use the # 331-TPSI-001 for a cleaner factory look on your dash when installing the control knob. I've attached a video below where David will walk you through the process of installing the # RED44FR. | So Ive got a...

The brake controller also needs to be mounted within the range specified in the instructions and not tilted or turned to the side. The leveler knob on the left side of the controller will also need to be in the proper position (straight up and down). |

If these functions are correct and there is no output on the blue wire when the Manual Slide Knob is activated there is most likely a problem inside the brake controller. | Took my 2008 F250 SD to get a gooseneck hitch installed...

Also, when I use the manual control it only show 17 no matter how much I depress the switch or adjust the voltage knob. I did see the notice about the Stoplight wire connection, but I do not have a light green wire on the switch I have a red with green strip and black wire. |

For a proportional trailer brake controller the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR great proportional trailer brake controller that is unique in the sense that it only the small knob is visible and it will not be in the way like a traditional trailer brake controller. |

Then you can use the manual knob to apply the brakes fully. If the trailer brakes lock up you will need to back the power level down, if the trailer braking is not sufficient you will turn the power up. | I installed dexter...

If you only plan on towing trailers with your motorhome then I recommend the Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional # RED24FR along with the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers # 331-TPH-005 for a simply plug and play installation. |