Result: Tail Light plug

drawing too much power from your Defender's tail lights. You can use # 18144 to securely mount the plug | Hello oh, I have a 1988 Land Rover defender with a 13 pin plug. I would like to hookup...

hooked up the harness to my 88 Volvo 240 this model was recommended by my mechanic. The tail light has | Hi there, I am a little confused as to how the brake lights are activated with this unit. I hooked up...

the same way; by plugging in line with the tail light wiring under the truck. I have linked a video showing | do you have this kind of connector with the wire? i have a 1988 f150and this connector...

converters use the tail light wiring on your truck just to trigger the converter's output, but again | Will your plug n tow ready connector affect the voltage drawn from the battery through the wires to the...

Hello..Id like to install a toggle switch to my tail lights..I have a 1988 ford ranger..can you | Hello..Id like to install a toggle switch to my tail lights..I have a 1988 ford ranger..can you please send me...

Help. My tail lights on the brown wire, and green and yellow for turn signals is good - but I | Help. My tail lights on the brown wire, and green and yellow for turn signals is good - but I don’t get brake...

wire. It has 3 wire leads, one for ground, one for tail light and one for a combined brake/turn signal | is this light compatible with a 4 wire system? | The Optronics Streamline LED Trailer Light is designed...

. The next item that you will need is a tail light kit. Due to the age of the vehicle, tail light kit | I am looking for a two bar for my 1988 Jeep Cherokee. I want to pull...

My car has the signal and tail lights on the same wire, so I was thinking I would use the Brown 4 | My car has the signal and tail lights on the same wire, so I was thinking I would use the Brown 4-flat for...

The GloLight LED Trailer Tail Light # STL178RB will not work with the Snap-on Reflector Ring | A couple years ago I bought the Optronics STL178RB Glolight taillights. At the time I was interested...

. You will need to use a circuit tester, included, to find the circuits needed behind the vehicle tail | I am planning to purchase tear trailer with electric brakes and need to know what kind of wire harness to purchase and...

The Upgraded Circuit Protected Tail Light Converter with 4-Pole Flat Trailer Connector # 119178 | Hi...I have a #119178.... 88 Aerostar...which wire goes where? What is the protector for? | The Upgraded Circuit...

Which wiring kit do I need for a 1988 VW cabriolet It has 3 bulbs tail lights, brake lights | Which wiring kit do I need for a 1988 VW cabriolet It has 3 bulbs tail lights, brake lights and...

Tow Ready Tail Light Isolating Diode System with 4-Pole Connector part # TR118821 Blue Ox Patriot | What parts are needed to flat tow this Jeep? | I have attached for you below a list of parts you will need...

connects to the brake pedal switch and the WHITE wire is your ground. If you do not have the pig tail | Hi, Could you possibly help me out with a diagram of how to install a tekonsha p3 into a 1988 Chevy G20 passenger van?...

will just need to cut off the connectors and splice the wires into your trailer light circuits. | I have a 1988 Ford F350 that is equipped with a factory tow package wiring plug. I am looking to purchase a 7 way pigtail that...

need a wiring harness or whatever its called for my 4runner so I can run the tail lights and all | I have 1986 Toyota 4runner and need to town a small travel trailer Scamp, Casita, Boler, etc. I need a wiring...

lights are very dim, The left turn signal brings on all the lights and the brake lights work however | I bought a brake controller and 7 pin setup from your company. I installed the t connector...

Hello I have a 1988 k1500 with a tekonsha voyager brake controller. The light is not lighting up | Hello I have a 1988 k1500 with a tekonsha voyager brake controller. The light is not lighting up green when...

of these light kits bypass the vehicle wiring so you won't have to splice into the tail light wiring | base plate rm033. Does this just bolt to the bumper on my Samuria? | No, the Roadmaster...

On the 1988 Ford F-150 the brake and turn signal lights are already converted, so a converter | NEED TO SEE WHERE WIRES CONNECT TO VEHICLE. | On the 1988 Ford F-150 the brake and turn signal lights are already converted, so...

like a wiring diagram of the brake lighting circuits if you have them. I have been a customer | Hello, I am n the process of installing a electric brake controller in a 1988 Ford F-350. My questions are did these come with...

lights will be drawn through the truck's own wiring. As far as differences, besides the way | What is the main difference, other then the the way it connects, between your T-One vehicle connector and your Curt Custom Fit wiring...

would get grounded, brown wire runs to the wire that comes on with the running/head lights, the yellow | well been looking for anything showing how to basically rewire a 88 Chevy silver ado 1500 with 4 pin trailer set what...