bing tracking image

Search: Brake Controller   >   !Featherlite  x   >   Performance Tool  x   >   Lexus  x   >  

Result: Brake Controller

Brake Controller Not Sending a Full 12 Volts with Brake Pedal

JUST INSTALLED NEW BRAKE CONTROLLER I HAVE 12 VOLTS WITH BRAKE PRESSED COMING OUT OF CONTROLLER | JUST INSTALLED NEW BRAKE CONTROLLER I HAVE 12 VOLTS WITH BRAKE PRESSED COMING...

2020 Lexus RX 350 Brake Controller Recommendation

weighs 2000 pounds, I plan to buy and install a brake controller. 1.Could you possibly tell me | 2020 lexus rx350, I attached the hitch and connected the harness. Since the trailer I need to tow weighs 2000...

Troubleshooting Lack Of Braking Power With A Hayes Energize III+ Brake Controller

Does the brake controller HA81742B,HA81785-HBC need to be grounded? The red light works | Does the brake controller HA81742B,HA81785-HBC need to be grounded? The red light works as described on the instructions...

How To Find The Cold Side Of The Stoplight Switch On A 2004 Lexus RX 330

Need install brake control on 04 Lexus rx330. Need info on locating cold side stoplight switch…I.e | Need install brake control on 04 Lexus rx330. Need info on locating cold side stoplight switch…I.e. location...

Best Brake Controller For 2012 Lexus RX 450 Hybrid

the vehicle. For this reason I would instead recommend using the Curt Echo Mobile Brake Controller # C51180 | Ive tried the Tekonsha Prodigy RF 90250 controller that plugs into 12v receptacle in the car, but...

Brake Controller Installation on 1998 Lexus LX470

It might sound hard to believe, but the procedure for installing a brake controller doesn't really | Hello, I have your ETBC7 installation kit + Tekonsha P2 controller. Which is the best video for me to...

Troubleshooting Installation/Wiring A Tekonsha P3 On A 1998 Toyota Tacoma

the P3 red wire to—the one that only has voltage when brakes are applied. After test driving | Installed the P3 on my 1998 Tacoma. Pretty sure I chose the correct stop light wire to connect the P3 red wire to—the one that only...

Locating Cold Side of Brake Stoplight Switch to Install Brake Controller on 2007 Lexus RX 400h

Cant find the brake wire to tie the red lead from an Activator 4-wire brake controller | Cant find the brake wire to tie the red lead from an Activator 4-wire brake controller. There is a 4-wire...

Brake Controller 7- and 4-Way Installation Kit # ETBC7 Installation on 2001 Lexus LX470

The procedure for installing a brake controller doesn't really vary much from vehicle to vehicle | You say that you uploaded an installation video, but there doesnt appear to be one anywhere. Is there an instal...

Tips on Finding the Brake Light Wire on Brake Switch for Brake Controller Install, 2007 Lexus RX400

Hi! I purchased Prodigy brake controller and the wiring kit for a 7 pole braking package a few | Hi! I purchased Prodigy brake controller and the wiring kit for a 7 pole braking package a few...

How to Identify The Correct Wire To Tie In The Brake Controller On a 2015 Lexus RX 350

Prodigy P3 Trailer Brake Controller # 90195 with a Wire Splice # SWC502905-1 or the preferred method would | How do I test which wire of the five on a 2015 lexus rx350 to tie into? One is yellow, one brown,...

Is 2003 Lexus GX470 Pre-Wired for Trailer Connector

- Power to Brake Controller • Location 9, 30A Fuse- 12-V Feed to Trailer • Location 10, 40A Fuse-Trailer | Hi! How can I find out if I have a 4 way or 7 way connector for my GX470 2003. I just bought the...

Finding Circuit to Run Red Wire of Brake Controller to for 2004 Lexus RX330

I’ve converted my 4-way to a 7-way, and now looking to install a Tow Pro Elite brake controller | I’ve converted my 4-way to a 7-way, and now looking to install a Tow Pro Elite brake controller. Everything is...

Can 2004 Lexus GX470 with Factory Tow Package Work with Prodigy RF Brake Controller

connector as it was not in your list of vehicles this works with? This question is for Prodigy RF brake | Will I need anything else with my 2004 Lexus GX470 with Factory tow package factory installed 7 way connector as it...

How Does Brake Controller Install in 2008 Lexus GX 470

. If instead you wanted to hardwire the controller to the wiring you have now you'd need to run the black wire | Hi- I need help wiring my Tekonsha P3 wiring 4 wiresto the Lexus OEM harness. 2008 GX470. The oem has 5 wires...

Solution for Finding Stoplight Circuit for 2009 Lexus RX 350

where can i find the cold side wire for the brake lites so i can ty in the brake control? | where can i find the cold side wire for the brake lites so i can ty in the brake control? | We don't...

Wiring Adapter for 2012 Lexus GX460 with 4-Pole Wiring to Match Trailer with 5-Pole Harness

to the trailer's brakes. This extra blue wire would need to be connected to the car's brake controller output | I have a Lexus GX460 that has the factory trailer wiring plugs installed. There...

How to Determine Brake, Running, and Turn Signal Lights, on a 2001 Lexus RX300

To determine which wire, control the turn signals, brake lights, and running lights it is best | I have a question about how to find out which wire is the signal, brake and stop light for a 2001 lexus rx300....

Connection of Reverse Lockout Circuit to 7-Pole Vehicle End Trailer Connector

on the 7-Pole connector is for electric brakes and is normally ran to a brake controller, you will not need | I recently purchased an adapter, 4 pole to 7 pole vehicle end connector to tow...

1996 Lexus LS400 Tail Light Wire Colors

to easily determine which circuit controls which function. Use a circuit tester, like part # PTW2993 | IF POSSIBLE PLEASE ADVISE WHAT THESE COLOR CODES ARE ON THESE TAIL LIGHT WIRES. GREEN WITH ORANGE STRIPE GREEN WITH WHITE...

Filter Your Search