Result: surface mount reverse light

a great backup camera, but Mercedes allows it to be powered only in reverse. The camera is tied | Application: 2020 Leisure Travel Van RV on 2019 Mercedes 3500 Sprinter Chassis. Our RV has a great backup camera, but Mercedes...

to tow has surge brakes and power from the reverse lights is needed to lock out the brakes when backing | Bought a Mercedes Benz GLE 350, no hitch package, want to tow a boat with surge brakes. I am lookin...

surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces | Every thing seem to go flawlessly seemed very simple but I now have no turn signal or...

red an white lens allowing it to act as a tail light, brake light and reverse light similar to your | Do you sell the Winnebago tail light assembly part number: 152070-01-000...

will also have a reverse light function if that circuit is functional on the 7-Way. But it does provide | I see the male then four female outputs on this adapter. I specifically need ground, 12v, and backup....

trailer light with a bulb. It is a surface mounted light that is 3-1/2" long x 1-1/8" wide x 1" thick; I | Hello Jason, I waited to hear back from you Saturday. I need the...

Yellow Reverse lights 14 Gauge | Hi, I am looking to replace the socket and wiring for a 2018 Mercedes Metris with the factory hitch and 7 pin receptacle. I just need the wiring diagram and a length...

the grounds for your trailer since most ground issues surface when multiple functions of your trailer happen | I have a 2014 Mercedes Benz Sprinter van with an aftermarket wiring harness. The harness seems to be working properly...

a plastic base, but it doesn't come with a gasket because it's a surface mount installation. With that being | Hello - Im wanting to add side light to my 170inch high roof sprinter van. My primary purpose...

wire to vehicle's reverse circuit if applicable. This will provide you with the ability to control your | I need a 7 pin trailer connector/kit for 2016 GLE Mercedes Benz. Dont need the stealth hitch already have hitch with...

carries the reverse lamp circuit. I'll link to a help article that shows how a 7-way should be pinned out | Ok, I have a 2019 Mercedes SPrinter 3500 that came with factory towing wiring but the 7 pin receiver has been sheered...

above the receiver tube) should fit underneath the lip of the rear fascia and reach the mounting surface | I can see how this hitch attaches to the bumper frame but to get access I have to removed plastic parts...