Result: Brake Controller

We have everything you need to install a brake controller in your 2013 Mitsubishi Outlander but you | What about the electric brake for the trailer ? Is that another kit? | We have everything you need to install...

I can get you set up with everything you need to add a brake controller to your 2014 Mitsubishi | Hello , What do I need to connect the trailer to my mitsubishi outlander 2014 v6. Trailer 7x14 with electric...

of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install | I just bought a camper that has a 7 way plug and my Outlander currently has a 4 way plug on it...

the controller. From there you would need to convert the 4-way to a 7-way so that you can install the brake | Hi, I asked about adding a hitch to our Outlander recently and ordered the recommended parts h We...

to tap into the brake light signal on the 4 pole as a trigger for a brake controller? Thank you | Hi there, I installed this Tekonsha custom fit in my 2013 mitsubishi outlander. Is it possible...

We have the Universal Installation Kit for Trailer Brake Controller # ETBC7 that will allow you | I had a tow package installed on my 2018 Outlander PHEV, but there was confusion about the wiring. The dealer...

and 3000 pounds. Ive got two choices of Tekonsha brake controller model installation at local dealer | Ive got a Mitsubishi Outlander 2014 and this summer I intend to tow a travel trailer of 18 feets and 3000...

Hi, I am installing Tekonsha Primus IQ Trailer Brake Controller in my 2016 Mitsubishi Outlander | Hi, I am installing Tekonsha Primus IQ Trailer Brake Controller in my 2016 Mitsubishi Outlander, but cannot...

for a electronic brake controller for it. It has a 4 flat going out. I plan on putting electronic brakes on my | I have a 2012 Mitsubishi Outlander 4wd GT. It has the factory towing package....

The Curt Echo part # C51180 would not require you to install a brake controller fuse in your 2018 | Is the 30a fuse a minimum or a maximum? Can I use it on a 40a fused circuit? | The Curt Echo part # C51180...

Hi I am looking for the brake light controller for my trailer, that is compatible with my 2009 | Hi I am looking for the brake light controller for my trailer, that is compatible with my 2009 Mitsubishi Outlander....

for Trailer Brake Controller # ETBC7L. This kit comes with the adapter, wiring, and everything else you | Hello, I have a 2019 Mitsubishi Outlander PHEV and towing a small Scamp trailer. I currently have...

everything needed to install a brake controller and have the 12 volt accessory circuit active as well | This kit lets me wire my PHEV Outlander for a flat 4 plug, good first step. My trailer is fitted with...

to get the 12V power. If you are using a brake controller in the cab of your vehicle they would also have | Hi, Ive bought a tear trailer Little Guy Mini Max weight is 2400# The 2018 outlander phev has a...

pole dual output harness and hooking up a Curt Venture brake controller. I have the Curt brake | Hello, Im installing a hitch with a 4 pole wiring harness, and will be converting to a 4 pole/7...

Yes, in order to use the Curt Echo Wireless Trailer Brake Controller item # C51180 you were looking | When I wired in my 7 prong trailer connect, I never ran the 12v as out popus did not need breaks, not I will...

of the wiring necessary to install it. Then you'll need a brake controller, like the Primus IQ # TK90160 | Just recently purchased a pop up the overall weight on it is 2200. I want to pull it with a 2010 2.4...

I have a 2010 Mitsibushi Outlander that has a Curt Class III Receiver 13581 installed as well as a CURT T-Connector 56102 for a 4-way connection. I would like to upgrade the 4-way connector to a 7-way and Im interested in ordering the ETBC7...