Result: z bracket

Hello, Can you tell me how tall the brackets are please? | From the base to the top of the bracket where the bolt hole is measures an inch, and the total length is 4-1/8 inches for the CE Smith Padlock Brackets for Spare Tire Carriers # CE26002Z-2. These...

Good morning, I would like to purchase a pair of CE Smith Padlock Brackets for Spare Tire Carriers Item # CE26002Z-2. Could you please let me know the bolt size/thread pitch on these brackets? I belive my CE Smith spare carrier are 7/16 bolts....

Will this fit the Etrailer locking brackets I just ordered? Thanks! | Yes, the CE Smith Padlock Brackets part # CE26002Z-2 will fit the Replacement U-Bolt for CE Smith Spare Trailer Tire Carrier part # CE22011Z. For a lock, I recommend using...

I just ordered this item along with the 12inch ce u-bolt. The picture doesnt show very well so wanted to make sure that the ce26002z-2 is threaded for the u bolt. Thank you. | The brackets, # CE26002Z-2, are only slightly threaded because the...

Is the Redarc fairing kit then compatible as well with the Renogy Z-brackets? | It is possible for the Redarc fairing kit part # RED29VR to be installed with the Renogy brackets but the fairing would not be able to fit over the brackets. They...

A36039 A customer asked about c clamps and you mentioned z Shape bracket. Does it come with it?or is that some we have to purchase separately? | The Access LiteRider Soft, Roll-Up Tonneau Cover # A36039 is a fit for your 2019 Honda Ridgeline....

2020 apex 253RLS that has a laminated roof and no trusses. Adding 2 go power 200w solar panels. There is aluminum 1inch square tube on edge with 3/8 plywood. My question 1. Mounting panel on roadside with Z-brackets screwed into the edge rail....

SFZ52-24KT Scag Freedom Z 52” mower. What catcher will fit it. Says standard deck but there isn’t a standard deck. There is a hero deck. I think it’s RCMMS4-OBS1 is the correct model for my mower. | Hey Matthew, According to Rack'em the 52"...

I purchased a 2018 K-Z Sportster 321THR13 and its prepped for the backup camera. What exactly do I need to purchase to make this work? I see the camera on the back of the camper on the top. | I believe your 2018 K-Z Sportster 321THR13 is prepared...

Reference Item # CE22007Z-11050-2, mounting to the frame of an angle iron utility trailer, is there a locking system available? Thanks | You can lock your spare tire to the CE Smith Spare Tire Carrier # CE22007Z-11050-2. All you need to do is...

I need a replacement set of brackets for my need bars. I have a 1998 Chevy 3 door extended cab Z71. I was windeeing if you had them,or knew where I could possibly get a set of mounting hardware. Thank You | For your nerf bars on your 1998 Chevy...

I am looking at buying a used grill guard that came off a 2003 Silverado. Not sure on the brand name but it looks like a Westin. I am guessing by the looks of the pictures it was an original manufactured before 2006. I have a 2003 Tahoe Z71....

would like to know what replacement mounting brackets I would need to buy to fit my 2000 Z71 4x4 pickup extended cab , I have the Westin Sportsman Guard . | If your 2000 Chevrolet truck is a K2500 then the confirmed Westin Replacement Mounting...

I purchased the CE Smith tire carrier. Will the threaded lock bracket fit the lugs? | Yes, the CE Smith Padlock Brackets for Spare Tire Carriers item # CE26002Z-2 you were looking at will fit the CE Smith Spare Tire Carrier for Trailers item...

How does this toolbox mount to the brackets? Are there holes pre-drilled in the bottom or back of the toolbox through which to put bolts? Or do I need to drill my own holes in the toolbox? Or does it weld on? | The brackets you use to install...

Do you know if the four mounting holes on this item align with the mounting holes on an OEM 04 GM Tahoe factory 7 way bracket? | The Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector part # HM40950 holes may line up with...

I need passenger side running board brackets for my 2003 Chevrolet Tahoe Z71. I was unaware etrailer had running board mounting brackets. I can send you an image of the bracket I need. Thank you. | Hello, and thanks for reaching out. We do offer...

I have a 2015 Nitro Z8 boat trailer, what Dexter suspension kit do I need ? 33” center to center for the axles, looks like 6 1/4” between the 2 bolts on the bottom of the bracket, @ 4” from the bottom of the bracket to the mounting bolt on...

Can I get this washer or a new bag of mounting hardware for this kit? | You can likely find a replacement washer at your local hardware/home improvement store but if you're looking for complete new hardware you'll need to get the whole Universal...

Hi shop! I have the Toro 48” Z master 2000 I’m looking for grass catcher Which one should i get? | Hey Tony, For a Toro Z Master you would need the Rack'Em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower # RCMMS4-EXS1 along with bracket...

what is the clearance from mount to the top | From the center of the pipe mount to the top of the etrailer jack # TJP-2002-Z measures 4-1/4 inches. |

Hi, If you refer to part Item # PLR1904-Z as an example: I need the bracket only and no strap. The bracket needs to be wide enough for a 4.1inch sleeve on the inside. Do you have anything suitable? Thank you | We don't have exactly...

Hello will these brackets fit my 2003 Tahoe z71? | The # 40-018PK brackets you had looked are compatible with the Westin # 40-0185 or the # 45-0180 Sportsman Grille Guard. Either of those grille guards are compatible with a 2003 Chevy Tahoe,...

I have a brushguard an no brackets. Do you sell brackets for 2003 silverado z71 1500 | I have a great solution to mount a compatible grille guard to your 2003 Chevy Silverado 1500 z71. Since we do not know what specific brush guard model you...