Result: parallel kit

Can I put leveling blocks under RVpaws jack pads? | Can I put leveling blocks under RVpaws jack pads? | Yes, Chris. You can use leveling blocks under RVpaws jack pads when you need extra height or want to reduce...

Going from one lead acid battery to two AGM batteries in my RV. Will connect in parallel. Do I need a battery balancer? | Going from one lead acid battery to two AGM batteries in my RV. Will connect in parallel....

1989 mallard rv How does the exact wiring go on both batteries under hood | 1989 mallard rv How does the exact wiring go on both batteries under hood | Based on your attached photo you are running two 12V batteries in parallel,...

The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = # RV57FR Standard 2" square jack leg = # RV24FR Lippert Titan or Level Up = # RV34FR Equalizer Brand = # RV84FR Keep in mind a Lippert Ground Control 3.0 would just use one of the standard setups, not the Titan or Level Up. |

The Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 that you referenced does not come with a 4-Way connector as you stated. | I purchased a BX8811 4-way dinghy wiring kit. There is no 4-way connector...

The difference is the jack leg shape. The # RV24FR fits standard 2" square leveling jack legs, while the # RV57FR fits standard 2" round leveling jack legs. | What is the difference...

Hi Robert! For an Equalizer leveling system, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV84FR. | Which RVpaws pads fit my Equalizer leveling system? | Hi Robert! For an...

If your fifth wheel uses standard 2" square leveling jack legs, the RVpaws articulating jack pads # RV24FR is the correct kit. | My fifth wheel has standard landing gear legs. Is that the RV24FR...

Hi Jeff! For an Equalizer leveling system with 12" round feet, you’ll want the RVpaws V2 Premium Articulating RV Jack Pads # RV84FR. | Which RVpaws pads fit an Equalizer leveling system on...

Just make sure you order the version that matches your setup: Standard 2" round = # RV57FR Standard 2" square = # RV24FR Lippert Titan or Level Up = # RV34FR Equalizer Brand = # RV84FR How many jack feet are on your RV? |

The correct part will depend on your setup: - # RV24FR for standard 2" square legs - # RV57FR for standard 2" round legs - # RV34FR for Lippert Titan or Level Up - # RV84FR for Equalizer motorhome systems What system is on your RV? |

I have Lippert Level Up jacks with factory 9 inch pads. Which RVpaws kit should I use for my Keystone 5th wheel? | I have Lippert Level Up jacks with factory 9 inch pads. Which RVpaws kit should I use for my...

If they are standard 2" square legs, use # RV24FR. The # RV34FR is the one for Lippert Level Up and Lippert Titan systems, and they won't work for yours. | I have Lippert Ground Control 3.0...

You will also want to use the Roadmaster Stop Light Switch Kit part # RM-751472 to activate the vehicle's brake lights while the brake pedal in the RV is depressed. | Looking for a tow bar base plate for 2018...

If you don't have a junction box I recommend upgrading to the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector part # 277-000141. | Can I hook that black terminal on the fuse block from...

The wireless systems will work but you will have better brake reaction if you tie the system directly into the air brakes on your RV. For your wiring, the Roadmaster Diode 7 to 6 Wire Flexo-Coil Kit # RM-15267 will connect the RV to the Jeep and installs a 6-way connector on the front of it. |

A junction box/7-way plug kit like # HS381-9000 is an option you have to convert the camper to match the 7-way RV blade type connector format. | Hello, I have a 2019 F-350 with the in bed camper plug receiver...

-Universal 4-way to 7-way Installation Kit # ETBC7 - to give your truck a 7-way RV style trailer connector. | Do the kingpins on fifth wheel camper trailers have the same dimensions as the 18- wheeler trailers?...

If you already have a 4 way connection on your 2008 Holiday Rambler Endeavor, then you will need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires, # ETBC7 to connect an electric brake controller to your RV. |

Now the spare tire blocks the passenger side tail light. Do you have a pair of led turn/stop. backup light kit that i could attach higher above the spare tire and equal distance on the drivers side, by splicing into the existing lights. |

You can use the Alpha Systems Butyl Tape for RV Weatherproofing # AL33FJ and the LaSalle Bristol XTRM Universal Self-Leveling Sealant # 34427034145-1 to provide those two aspects of the kit....

Next you will need a tow bar wiring kit. I recommend the Roadmaster RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. |

One end plugs into a 7-Way on the RV and the other end plugs into the 6-Way included with the kit. | I need to tow my car 4 down behind my motor home. What will I need? It is a 2015 Smart car. The RV has a...

I will need the base plate, bulb kit RM-155, Battery Disconnect, Charge Line, Breakaway, and PK12720. | Im Purchasing a 2016 Ford Focus HB SE. It was manufactured 11/15. I noticed one kit says late 2016 models-what about early...