Result:

In regards to storage, most customer store the hose portion in the rear bumper or a storage tube like the Valterra RV Sewer Hose Carrier part # A04-5094BK and the head in one of the many RV storage compartments inside a seal container. |

What's great about the Valterra RV Sewer Hose Carrier # A04-5094BK is that you can mount it in other places aside from just at the rear under the bumper. | I have a RV with a 4X 4inch Square tubing bumper....

Hello I have a question on my 05 copper canyon sprinter.I bought this trailer used a few weeks back.In order to get 6 inches between tailgate and rv the nose of the camper is way up in the air.my springs dont seem shot on trailer.But ive noticed the rear trailer tires are rubbing on floor of rv. i believe it was supposed to have 205/75r15 tires from factory and it has 225 on it .If i go back to 205/75 it will help the rubbing situation but make the rv even lower. also my axle is already under the springs.do they make blocks and longer ubolts like for the rear of a truck or a taller center equalizer.I am at a loss as to what to do. |

Once you've got the waste valve chosen and installed you can add the Waste Master RV Sewer Hose w/Cam Lock Fittings # LC360781 to your black water system. | I want to to convert my existing fifth wheel sewer...

It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue. | I have the rhino sewage hoses from each tank...

To get the right system you would only need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle. |