Result: 30 amp plug

I have a 2015 Chevy Traverse LS. I noticed that this harness kit includes 3 30 amp fuses and 3 relays, yet your installation video shows you only use 2 30 amp fuses and relays. Is this kit including an extra fuse and relay ? | Yes, the...

I purchased the Tekonsha Power Trac Brake Controller 39523 with pigtail 3026-P for a 2011 Chevy Traverse. It connected fine to the existing gray plug by the emergency brake and I have the controller mounted below the steering wheel. I have...

how do you tie the controller into a 2010 traverse that does not have the factory tow package. I am looking at a trailer with brakes and a hwight of 1700. I would like to use the brakes if possible. Thanks | Without a factory tow package,...

When we purchased our 2018 FR3 30DS this summer, the very short term previous owner also provided us with a Falcon 5250 towbar and a never opened Roadmaster 9243-3 Tow Bar Combo Kit in the deal. The Falcon, while older, appears to be in pristine...

What is the current draw for the jack? I need to know this value to determine the wire gauge. What is the lift rate/time? I have a 7000 lb capacity flat bed trailer. The empty tongue weight is 350# with a max tongue weight of 800#. |...

I have at 2019 Chevy Traverse with a dealer installed hitch not equipped with factory installed tow package. I am looking for a 4-pole to 7-pole adapter that will allow me to use the Curt Echo Wireless Trailer Brake Controller. Is there a...

What are all of the parts and components I need for this project My camper already has the tow 2inch tow hitch and plug. | The first thing to check when you're wanting to flat tow your vehicle is your owners manual. There will be a sectional...

I have a 2012 Chevy Traverse LT awd w/o tow package. Im adding aftermarket and Gm parts to allow me to tow a travel trailer with brakes. I looked under my dash and around the steering column but do not see any brake control wires or connector....

I was hoping I could just use 118450 to plug into my existing tail light sockets but got concerned when I saw support discontinued for MYs later than 2011. Ive seen the kits that use the factory TOW connector but have also read I need to...

I just installed this break controller on my 2011 Chevrolet Traverse. Can you please assist on what size relay or fuse I need to install to power the unit and also where in the fuse box i need to install it. Thanks in advance. | For your Prodigy...

I need to have a hitch installed on my 2010 Chevy Traverse, however I am not the handiest guy, Does this hitch require any drilling or remooving any parts from under my Traverse and how easy is the light kit to install. Thanks for the help....